🚪 Inset door handle from the young masters: step master class

click fraud protection

Some ordinary things so firmly established in our everyday life, which do not even think about it, how complicated it can be. Here, for example, a door handle. What are they difficult? You do not understand, it is not necessary to understand their designs and set their own. And now, it turns out, is not so simple! And a simple thing whose values ​​pridaosh not, in practice, is a complex structure with a number of details and nuances uneasy installation. Versed with all this Elena Kolesnikova from Stavropol. She is photographed in detail handles the installation and the work carried out so gently that you can take it as a model to follow.

Hello friends! Last week we loaded the rain, wet feet and I fell ill. A sick in bed, I can not. Well, maybe just the first day, and then I need something to occupy his hands and head, otherwise, even a wolf howl. So this time, when the temperature was asleep, I began to look for some homework, with highly intelligent. And imagine found! New cloth interior door in the house, which is installed on the last Tuesday. Cool fabric, but without handles. The handle has been included separately. Strange little, but the door bought my mom, so I do not know how it happened. But the fact remains that there is a door there with lock knobBut for some reason they exist separately, and have to be together.

Take a pencil: markup

Experience has shown that the most important thing - the right marking. Slightly promahnoshsya pencil, then promahnoshsya and drill. A promahnoshsya drill - down the drain.

Start marking - the location of the pen on canvas.

Optimum height from the floor - from 90 to 100 cm. But pick up so that it corresponds to your height
Optimum height from the floor - from 90 to 100 cm. But pick up so that it corresponds to your height
To markup was flat, using not only roulette, but the corner. It will allow to carry out smooth lines
To markup was flat, using not only roulette, but the corner. It will allow to carry out smooth lines
I put a padlock to the blade at the correct height and through the holes tick
I put a padlock to the blade at the correct height and through the holes tick
That is the most important mark on the canvas: the place of the handle arrangement, which will be held through the door and lock
That is the most important mark on the canvas: the place of the handle arrangement, which will be held through the door and lock
Exactly the mark I set and on the opposite side of the web
Exactly the mark I set and on the opposite side of the web

The first mark is made, it is time to break the integrity of the door! For this task, I need a power drill.

Eyes fear, the hands do: Box

The worst thing - to decide to drill. You understand that if I make a mistake - the extra hole is not exactly a new door decorate.

It is important to direct the drill so that it went exactly perpendicular to the web. A slight slope - and will leave a hole in the side
It is important to direct the drill so that it went exactly perpendicular to the web. A slight slope - and will leave a hole in the side

Drilling is not necessary thoroughly. Should go only half way and then - the second half on the other side. At work it is important to firmly lock the door to vibrations and motions do not interfere with work. And it is better to do everything at a low speed.

When the through-hole was ready, I put the pin through the handle lock and noted its edge on the face of the door
When the through-hole was ready, I put the pin through the handle lock and noted its edge on the face of the door
Still need to note the thickness of the locking mechanism at the same end
Still need to note the thickness of the locking mechanism at the same end
At first I Drill center tie with a thin drill
At first I Drill center tie with a thin drill
Then in the course went drill "ten". With it, I expanded the hole
Then in the course went drill "ten". With it, I expanded the hole

When the hole is planned, it is time to literally jewelry work. It will take a chisel and a hammer.

Chisel choose a recess for the lock. The work is not easy, and it is not necessary to hurry up. No need to make a big effort, otherwise you can damage the fabric
Chisel choose a recess for the lock. The work is not easy, and it is not necessary to hurry up. No need to make a big effort, otherwise you can damage the fabric
When the lock cylinder sitting comfortably in its recess, it should be noted frame edge. They will interfere to close the door, they need a little sink to the web
When the lock cylinder sitting comfortably in its recess, it should be noted frame edge. They will interfere to close the door, they need a little sink to the web
The contour of the frame to choose laminate to a depth of approximately 2-3 mm. It can be cut with a knife construction
The contour of the frame to choose laminate to a depth of approximately 2-3 mm. It can be cut with a knife construction
Flick of a chisel choose extra to lock fell into place
Flick of a chisel choose extra to lock fell into place

All. Now lock in place. Nothing sticks out and does not cling. It is possible to fix the frame lock regular screws.

Take a pen in the pen: installation

At the door, two handles on both sides. They need to be spread on a through pin.

If done correctly, the handle will rise evenly, without distortions
If done correctly, the handle will rise evenly, without distortions
Anchorages should be noted, and even drill two shallow holes with a thin drill
Anchorages should be noted, and even drill two shallow holes with a thin drill
These openings include screws, which usually come bundled
These openings include screws, which usually come bundled

Others handles the mounting holes can be larger. I suggest using all because the device is securely and firmly seated in place. Do not worry, everything will be hidden under the outer cap cover.

The final touch - fasten the cover, which will hide all fasteners
The final touch - fasten the cover, which will hide all fasteners

Exactly the same work should be done with the reverse side of the web.

That's all! I coped with this task in just a few hours. And despite the fact that experience I did not have any. If it was - it would take much less time. Try it and you, it is not so difficult!

Thank you Helen for such a detailed story and incremental photos! Handle with lock - not such a simple mechanism, as it seems at first glance. And most importantly in its setting - accurate compliance markup and leisurely activities. To supplement this material can only be a small video on the same topic from a professional in the door saloon:

If you are not confident in their abilities - it is better to make the installation of the handle at the point of purchase of the door leaf. Usually in such outlets has its own master, which for a small fee to quickly and accurately perform the order. And you will be convinced. Although, maybe you're not looking for easy ways?

What do you think, Elena cope with the task? We welcome your comments and new materials under the heading "not a woman's business."

Photo: Elena Kolesnikova

[Totalpoll id = »58308"]