📦 DIY New Year's fireplace from waste material

Not A Woman's Business August 18, 2021
click fraud protection

Interior of New Year holidays necessarily includes a tree. But there are other attributes that can help create a special atmosphere. For example, fireplace with live fire. But not everyone has such a luxury. Only the owners of country cottages can boast of a real fireplace. But apartment owners cannot afford it. This does not mean that the situation is hopeless. The fireplace may well be fake, although such a word is not very euphonic. Better to say - an imitation of a fireplace. An excellent version of such an imitation was offered by Elena, the author of the YouTube channel. Sielar. Her project is very budgetary, it is quite simple to execute, if you wish, you can repeat this at home.

Read in the article

  • 1 What is required to make a fireplace
  • 2 How to make a container cardboard fireplace body
  • 3 Decorating an artificial fireplace

What is required to make a fireplace

You don't need anything special. A pack of the cheapest tissues or a couple of rolls of toilet paper are sure to be found in every home. You can get a large cardboard box or several containers of containerboard from the nearest store. You also need to stock up on a roll of masking tape, acrylic paint and PVA glue.

As you can see, the set is very affordable. Most of it is either completely junk materials, or raw materials of a penny value. If you don't even have PVA, you can replace it with homemade flour or starch paste.

How to make a container cardboard fireplace body

Elena found a very simple option for the base of the fireplace. She apparently had a recent refurbishment and had the foresight to leave containers for various crafts.

DIY New Year's fireplace from waste material
The radiator box came in handy for the fireplace. It has just the right height and width for this purpose. But if you could not find such a large container, you can assemble a case from several small ones. They can be fastened together with masking tape.
Elena cut the cardboard and connected the parts in the right direction with hot melt glue
Elena cut the cardboard and connected the parts in the right direction with hot melt glue
The upper part of the fireplace, as conceived by the author, has a wide tabletop with beveled edges. It needs to be additionally strengthened, so there are two layers of cardboard glued together.
The upper part of the fireplace, as conceived by the author, has a wide tabletop with beveled edges. It needs to be additionally strengthened, so there are two layers of cardboard glued together.
The table top is made separately and glued to the main part on PVA. To make the gluing strong, place a load on top: books or heavy dishes
The table top is made separately and glued to the main part on PVA. To make the gluing strong, place a load on top: books or heavy dishes

Decorating an artificial fireplace

The cardboard box cannot be simply left as it is. Even if you paint it now, it will be clear what it is made of.

Elena pasted over it with paper. First - thin, and on top of it - a regular stationery. PVA glue was applied both under the paper and on top of it. And if irregularities appear at the joints of the parts, then it is better to close them with masking tape before pasting
Elena pasted over it with paper. First - thin, and on top of it - a regular stationery. PVA glue was applied both under the paper and on top of it. And if irregularities appear at the joints of the parts, then it is better to close them with masking tape before pasting
In this state, the fireplace can hardly be called cardboard. The paper hid all the irregularities. Before the next stage of work, the case must dry well
In this state, the fireplace can hardly be called cardboard. The paper hid all the irregularities. Before the next stage of work, the case must dry well
For further decoration, you need to prepare such details from the same thick containerboard. These are bricks about 7-8 cm wide and 15-17 cm long
For further decoration, you need to prepare such details from the same thick containerboard. These are bricks about 7-8 cm wide and 15-17 cm long
The bricks are glued to the body with hot melt glue. At the corner places, you can bend them, as the author does.
The bricks are glued to the body with hot melt glue. At the corner places, you can bend them, as the author does.
When all the details are in place, prime them with PVA. The entire body of the fireplace must be covered with bricks
When all the details are in place, prime them with PVA. The entire body of the fireplace must be covered with bricks
Place a single layer of cheap tissues or toilet paper directly on top of the primer
Place a single layer of cheap tissues or toilet paper directly on top of the primer
On top of the napkins, go over again with a brush with PVA, pressing it in the places of the recesses so that the thin napkins are well squeezed. Now the fireplace must be left to dry completely.
On top of the napkins, go over again with a brush with PVA, pressing it in the places of the recesses so that the thin napkins are well squeezed. Now the fireplace must be left to dry completely.
The final stage is painting. It is better to use acrylic paint for this purpose; it can be used in the house without even opening the windows on frosty holidays. And it dries very quickly, literally in half an hour.
The final stage is painting. It is better to use acrylic paint for this purpose; it can be used in the house without even opening the windows on frosty holidays. And it dries very quickly, literally in half an hour.

The author painted the fireplace white, so it fits well into her interior. But you can choose another option: add color and draw the seams. If you don't want to mess around with cardboard bricks, you can buy PVC imitation brickwork at a hardware store. Bricks can even be made from egg trays. In fact, this is papier-mâché, it only needs to be soaked and re-formed in the shape of a brick-like tile. In short, there are a lot of decoration options, follow your imagination.

And when you create a complete imitation of brickwork, you can add New Year's decor. Decorate the fireplace with tinsel, hang traditional socks on it, and put logs and a flickering LED garland in the firebox.
And when you create a complete imitation of brickwork, you can add New Year's decor. Decorate the fireplace with tinsel, hang traditional socks on it, and put logs and a flickering LED garland in the firebox.
Complete the top shelf of your craft with a candlestick and New Year's baubles. You can put photos in beautiful frames, and hang a Christmas wreath over the fireplace.
Complete the top shelf of your craft with a candlestick and New Year's baubles. You can put photos in beautiful frames, and hang a Christmas wreath over the fireplace.

When the holiday is over, such a fireplace is not a pity to throw away. However, if you have storage space, then it will delight you also next year.

Such false fireplaces can be made not only from cardboard. Craftsmen use polystyrene, plywood and other materials at hand for this purpose. Here is another version of an artificial fireplace in a video master class:

Write about your impressions of this master class in the comments. Did you like the idea of ​​the author? Would you like to make such a design at home?

If you are planning or have already done something similar and recorded the process in the photo, send them with a description to our section "This is not a woman's business"!

PHOTO: Youtube-channel "Sielar"

Discuss0

About us

Serviceyards.com

Categories

Latest

How to get rid of mold on the walls?
How to get rid of mold on the walls? March 22, 2018
How to wash linoleum from dirt?
How to wash linoleum from dirt? March 22, 2018
How to clean a mirror without stains
How to clean a mirror without stains March 22, 2018