Sketch wardrobe: the stages of design of furniture

Wardrobe is more than just a closet with shelves, nearly wardrobe. Sometimes departing door closes the entrance to the pantry with numerous compartments for clothes, items, canned food warehouses.

Advantages of the design wardrobe with his hands become visible to the person who is what he wants from the new furniture units. Standard cabinets are practically the same in the shops, they are diverse, but they can not take into account the nuances associated with your home, belongings and personal preferences. A niche in the wall, you want to completely close the cabinet, or enclose it with the help of the pantry. Or make a cabinet in the wall, to avoid unsightly gaps, which is constantly clogged with dust. And the shelves? More or less, particularly suitable for standard boxes or cans.

One school geometry, even with a good evaluation, will be small. If you have never done repairs, it will be difficult to represent three-dimensional picture of the look of the future interior. This is normal. It comes to the aid drawing. Take a piece of paper, a pen and draw a pencil in a certain proportion of his room, a corner where to stand wardrobe, shelves, that you want to do there. Take the hands of a tape measure and see how actually looks like a 30-centimeter regiment, and draw conclusions.

Make the project not as easy as it seems. How to calculate the cut particle board for the cabinet to open all the doors, all the boxes were put forward to the design did not collapse under its own gravity? Then we would have to start all over again. wardrobe design their own hands - not an easy task, it is necessary to consider the little things that can create big problems.

We must take into account when designing wardrobe

• The width of the door - no need to make the boxes wider than the door opens, otherwise it will be impossible to push the drawer.
• Usable cabinet depth is less than the actual 10 cm, the space occupied by the door.
• 2- and 3-door cabinets can only be opened in one compartment, a 4-door - two. That is the number of compartments equal to the number of doors, otherwise it will be impossible to get inside.
• The cabinets are the so-called dead zones - places where you can not put the drawers, it is there or right edge of the left door or left edge of the right door. It is also necessary to consider the presence of the guides.
• Too long shelf (more than half) can bend under them better to install the rack.
• For this reason, the design closet under the whole roof should not put walls.
• Cabinet doors must have the same width in order to maximize the width of the door. Exception: when the middle door in the 3-door closet twice as wide as the others.
• In the design of the drawers in the closet coupe is worth considering that bulging handle may protrude and interfere with the movement of the door, which should be avoided.
• For every sliding door installation is obligatory stops - it's convenient operation and prevents spontaneous opening or closing doors.

Stages of the design of furniture

Preliminary work - we need to understand what we want. Built-in closet or a normal, what size, how many doors. For example, the optimum depth of the cabinet is 60 cm, otherwise - you will not be convenient to place the hanger.

Draft project - calculation of the size, drawing the desired cabinet on paper, to understand exactly what needs to happen in the end. Number of shelves and what size that the cabinet will be kept. How to store things - hung on hangers or folded on the shelves? What do the shelves - more narrow that there is nothing did not fall, or you plan to use the boxes?

Technical project in a special program which thoroughly specify all sizes and fines up to the type and color of accessories. Yes, you need to download, install and learn new software, find the video tutorials on them, and a few hours to spend on training. However, the result will be worth it - in the future you will be able to save a good time.

The order of the design wardrobe

• We are making the necessary measurements.
• We take into account the 10 cm depth of the door and the height of 5 cm on a plinth - distance between the floor of the room and the floor of the cabinet.
• the cabinet door is better to do in order - it is connected with a lot of accessories, and high-precision work, you want to make for their assembly.
• We think over-filling the compartment of the cabinet. It is important to look at the standard models of cabinets to understand their convenience, versatility and forethought, and only then on the basis of this thinking that better suit you. Often on the sides to make small shelf on top - a long mezzanine, as well as the shelf at the bottom of the cabinet. Mid provided for hanging clothes.

Overview of software assistants in the production of furniture

Technical project now practically is not drawn on paper - it's a long, difficult and carries a large risk of errors. Yes, the development of the program seems complicated, but it's worth it, and all specialists are able to work in the most optimal program for their opinion. And customers fairly with the manager to draw the desired project and wait until you get a new wardrobe in his apartment: a beautiful, comfortable and functional.

• Rro100 - simple and clear visual program for the design of furniture and interiors preparation. It helps in the design due to the volume rendering image. It contains a lot of ready-made modules to make them into a single whole, as a designer, but in your size, and color combinations. Wardrobe in such a program will look very elegant and seductive.
• Woody program is more suitable for the design of furniture than for interior design. Large catalog of parts and accessories to help automate the process of creating furniture with his own hands, name ( "wood" is translated as "tree") means that the planned furniture wood or chipboard, as well as closet.
• Astra Furniture Constructor - a relatively simple and straightforward to use, perfectly helps manufacturers of furniture to order. Beautiful visualization is not here, but its function - to help in the design - the program performs perfectly. Well suited for the design-cabinet compartment.
• Program T-FLEX Furniture designs furniture of any complexity. It includes two types of work: the creation of facilities and preparation of wardrobes together with the customer, and direct designer furniture to create a unique product to order.

Design of cabinet - not a simple matter, however, if you take up the case with the mind, the furniture made by the hands, will be the most convenient for you and is ideally suited to a particular room.

VIDEO: sliding wardrobe with his hands. Part 1