Project closet in the hallway. Build your own hands, the photo idea.

Services Production of furniture to order is quite popular at the moment. compose wardrobe design It can be in any of the specialized companies. The ordering process is often long, but the result is furniture that is fully in line with the requirements of the landlord.

How is work?

To make a wardrobe, perform the following steps.

1. Invite the master, which will make the measurements (it is possible to implement it on their own).
2. Create drawings closet. The project shall include all previously received dimensions.
3. Calculations are made of pieces of furniture, the position is calculated shelves.
   
   

   Decide for what specific things you want to make a sliding wardrobe. Make their measurements and plan a place for them in the closet.

4. At work, you can use special software for furniture design, are available on the Internet.
5. Send the documents to the factory.
6. Set the finished furniture in the room.
   
   

   Follow the drawings very carefully carefully, because then you'll have to collect the closet it is for them.

How to choose a door?

This is an important element wardrobeYou want to choose carefully. To begin, it should be noted that the scope of doors They may be made of aluminum or steel.

In addition, there are different ways of suspension doors. The flaps can be supported by the lower guide, or suspended on top.

When it comes to its application as a dressing room, you should choose the second option. In this case, the lower guide will not interfere on the floor because of his complete lack.

Now it's time to choose a door manufacturing material. This can be:

• particleboard;
• WThe mirror is;
• FROMflowed with photo printing.

If you install it in the hallway, it's best to choose a mirror, so increased the functionality of the furniture.

It is important to pay close attention to dimensions products, as well as its content. From what will be the location of the shelves inside, it depends on the usability of furniture. First of all it is important to consider ways to use wardrobe.

It is also often used to coat hooks. Today it is possible to use special aluminum systems for the internal filling, dimensions which may be different.

Features of the independent production wardrobe

In coupe, made with their own hands, there are lots of advantages. First of all, you can be completely sure of the quality of furnishings, to implement location shelves and hooks fit you properly.

You must purchase the following items:

• Dva bolt intended to lock the supporting wheels;
• Para support wheels to help positioning doors the lower profile, being the guide;
• BEtara screw for tightening. They are designed to connect horizontal and vertical profiles;
• PMacaw supports, by means of which doors positioned at the top;
• Heposredstvenno profile itself.

With the above objects as well as using different diameter drill, assemble the frame door.

The subsequent process is as follows.

1. Think about how you will make the cabinet housing compartment. As a rule, for this purpose used chipboard.
   
   

   The basic material for the manufacture of wardrobe - laminated chipboard.

   Buy material can be on specialized databases, you should only choose the color. At the moment it operates a significant number of companies that produce cutting chipboard to create cabinets compartment.
   

   

   Usually the list of parts with dimensions sufficient to ensure that you have made the cut.

   Before you apply to a company, you must complete all the required calculations, defining dimensions future product.
   

   

   Components of the project, in which all the elements rascherchivayutsya cabinet compartment.

2. After you prepare project, "Cutting" to perform. In these companies often can be ordered and edging details for the coupe. This means that the material sections cover edge: melamine or plastic.
   
   

   Application of this method extends the wardrobe service, making it more durable and reliable.

3. Home can begin to assemble compartment.
   
   

   Installing wardrobe frame.

   With the use of fasteners and tools of the above components are connected in series.
   

   

   Installing wardrobe basics.

   last hung doorsThat are sure to want to adjust. Only in this case they are right "ride" on the rails.
   

   

   Dimensions on which part of the project, should be followed strictly.

The final stage is the decoration of the cabinet. The cabinet can be decorated in various ways.

• Glass. If project It includes a variant of a material can be chosen frosted or patterned. The glass is inserted into the door frame.
  
  

  It looks design is not as massive as usual wooden, brings to the interior of lightness.

• Mirror with sandblast pattern. This particular white pattern, which is performed in special chambers pressurized sand.
  
  

  It looks like an original design, suitable for a variety of interiors.

• Photocopying. If you turn to project door with the image, you can be sure that the visitors will not leave your closet without attention.
  
  

  Images that are used for the manufacture of such flaps can be different.

  You may like to take advantage of the base of a specialized company, and use their own photos.
  

  

  The film is printed with a picture on it is placed under the glass.

• Chipboard. Budget is the most projectIn which there are doors, made of this material.
  
  

  It's simple - the canvas, whose thickness is about eight millimeters, is inserted into the door frame.

As you can see, an important nuance in the manufacture of the cabinet is the project. It must be detailed and carefully.

VIDEO: Wardrobe with their hands.

50 photo-ideas-in closets in the hallway: