How to wash putty

Every office worker at least once visited the question: how to wash the putty? The same question probably arose among mothers of schoolchildren. The spot, of course, is considered difficult to remove, but, knowing the removal features, you can get rid of some types of pollution, and quickly and without much effort. In this article, you will learn how and how to easily remove the proof-reader from the fabric.

to the contents ↑

How to remove the putty from the clothes?

The corrector plays a large role in removing the stain. There are 4 main types: water, alcohol or emulsion, based on a solvent and a bar-corrector with a roller-roller. Depending on the type of proofreader you will need such cleaning agents:

• laundry soap;
• alcohol or any alcohol-containing liquid;
• acetone;
• petrol;
• nail polish remover;
• ammonia.

And also you will find useful aids:

• cotton swabs;
• freezer;
• clean rags;
• pelvis for soaking;
• brush;
• washing machine.

to the contents ↑

How to remove the stain from the proof-reader from the clothes?

As already mentioned, the removal of contamination depends on the composition of the corrector. Read the instructions for wiping the putty from the fabric, and get down to business.

How to get rid of water-based putty?

The easiest way to remove stains from putty on a water basis. To do this you will need a laundry soap. Follow this step-by-step instruction:

1. Wash the soiled area under running water with household soap.
2. Clean in normal mode in a washing machine.

There is another way:

1. Soak a thing with a stain in a cold soapy solution.
2. Leave it for 30 minutes.
3. Wash with powder in machine.

How to remove the corrector on alcohol basis?

For effective results, use any alcohol-containing liquid: cologne, vodka, after shave lotion, etc.

In this case, proceed as follows:

1. Wait for the putty to dry on clothing.
2. Remove the solids of the putty on the surface of the fabric with a brush.
3. Take the cotton swab.
4. Dampen with medium.
5. Wipe the stain.
6. Wash with powder.

Note: If contamination does not disappear after treatment with alcohol-containing liquid, repeat the action 10 minutes after the last attempt, but before washing.

Still ammonia will help you. Use it this way:

1. Dissolve ammonia with water in equal parts.
2. Apply the mortar to the putty residue.
3. Leave for 40 minutes.
4. Wash in intensive mode.

How to remove traces of things from putty with a roller-roller?

With the correct approach, the traces of such an equalizer lag behind, like scotch tape. In the first case, you can remove it with soaking. To do this:

1. Soak a thing in cold water with powder.
2. Leave for 1 hour.
3. Remove the tape from the surface of the fabric.
4. Wash with a detergent that is suitable for this fabric.

Note: If necessary, use a brush while removing the tape from the thing.

Another interesting and simple option, in which you will need a freezer:

1. Put the thing in the freezer.
2. Leave for 1 hour.
3. Remove and rub the dirt.
4. Clean as usual.

Note: "freeze" the thing until the traces of the corrector disappear completely. This can happen from the third time, depending on the degree and prescription of the contamination.

How to remove stains from solvent-based putty?

The most dangerous kind of putty. It requires the use of aggressive means, and some types of tissues do not tolerate it. Therefore, before applying the remedy chosen by you, try it on an undetectable piece of clothing. If everything is all right, get down to business.

You will need any solvent:

• petrol;
• acetone;
• nail polish remover.

After determining the tool, follow these instructions when working:

1. Remove the fabric inside out.
2. Place a clean cloth on the front of your clothing.
3. Dampen the cotton pad with the medium.
4. Treat the stain.
5. Leave for 30 minutes.
6. Soak a new disc with a tool.
7. Remove any remaining residue from the putty.
8. Wash the thing in the washing machine at maximum mode and with an additional rinse.

Note: Try not to rub dirt and dirt into the fabric. Move from the edges to the center of the stain during processing.

You can use a solution with ammonia. For this:

1. Mix ammonia and any solvent in equal proportions.
2. Dampen with a clean rag.
3. Rub the stained place. Soak in warm water with powder.
4. Wash.

to the contents ↑

Useful advices

Try to remove the stain while it is fresh.

• Do not remove the stain from the corrector yourself with materials such as silk, wool, velvet and acetate. These fabrics are very delicate. Use dry cleaning services.
• If you are completely lazy to spend time cleaning things after a careless use of putty, just glue a nice application to this place, if the style allows.
• Before handing over to a dry cleaning of delicate things, do not erase them yourself: the stain can penetrate deeper, and dry cleaning in this case will not be responsible for the remaining pollution.

Even if you often have to use putty and you constantly find traces of it on your things, it will no longer be a problem for you. Now you know all the ways to remove stains from the corrector from clothes and you can safely use them, clearly following the stated rules of washing!