How to iron trousers with arrows correctly: step by step guide

Pants are an important part of the business wardrobe for both women and men, so everyone should know how to iron trousers with arrows. There are models that look good only if the arrows are properly ironed.

Preparation for ironing

If you approach the ironing process correctly, you can easily achieve a good result. For this it is necessary to do the following:

• the ironing surface with a cover or a dense cover;
• should use an iron with a steamer function;
• when ironing cover the pants with a thin gauze cloth;
• will additionally require a sprayer with water.

It is important to first set the temperature on the iron to match the type of trouser fabric. It is indicated on the label sewn inside the pants. Many people try to cut it off so that it does not interfere with socks. Therefore, if such information is not available, then remember: linen, wool and cotton are polished at high temperatures, and synthetic - at medium and low.

When ironing trousers, first turn inside out, iron the lining and pockets, special attention should be paid to the belt. A wide back seam requires separate smoothing. Doing everything must be done carefully, since it will be difficult to remove shortcomings later.

The process of ironing

Often, ironing clothes seems like a simple activity, but how to iron the trousers is not always known. After making the necessary preparations, you can start ironing your pants and make the ideal shooters.

To begin with, the trousers should be spread out on the ironing surface, spread out with your hands. Face and inner side seams must coincide. The most difficult area is the top part of the product, since it contains a large number of back seams. If you smooth these places in the usual way, internal seams may appear, and it will look ugly. To avoid such a situation, you can do so - under the inner part of the pants to put a pillow, and the very pant leg is covered with a slightly damp cloth. Ironing is well suited for gauze. The iron quickly drains the protective fabric, so it is necessary to spray the sprayer periodically to moisten it.

After smoothing the top of the trousers, you can go directly to the trousers, you do not need to touch the arrows until you touch it. Having smoothed one side, the pants should be turned over and ironed the second one. After that, you should drop the upper trouser leg. Your gaze will appear the inside of the second half of the pants. It should be ironed with steam in a similar way. Now, you need to do the following - turn the pants over and iron the inner area of ​​the second leg.

How to make arrows on trousers?

It is the hands that give the men's trousers a special style - made according to the classic cut-off, they create a more slender figure and an official image. On these pants there are 2 straight darts on each side. They serve as the basis for arrows for trousers.

Pants have always been considered a particularly fashionable part of the men's wardrobe. Doing arrows during ironing was a must. There were bikes saying that you could even cut yourself about properly ironed arrows.

So, in order to smooth the arrows on the trousers, you need to pay attention to the darts again, the arrows continue. To begin with it is necessary to find on trousers back and forward darts. They must go to the edges of the pants and eventually will be arrows. For convenience, you can do so - fasten on the ironing board with your pants pins, in order to schedule arrows and iron after that calmly.
Before starting ironing, make sure that the seams of both legs match completely and that the arrows exit from the darts. If you fulfill all the conditions, the trousers will be ironed correctly.
After it is necessary to cover the ironed places with moistened gauze and start the ironing process itself. The edges of the trousers can be pulled out by hand.

Tips for the

• To maintain the correct shape of the arrows, you can grate them from the inside with a piece of soap. This trick will allow you to keep their appearance longer. Sometimes a little ammonia or vinegar is added to the water to be sprayed - for additional fixation of the arrows.
• It happens that there are models of trousers with so-called darts-tucks, arrows are possible and in this version. First, smooth the tuck in front on the right, then on the left, and then follow the same pattern as described above.

After finishing the ironing process, the trousers should be allowed to cool. Only after that they can be worn or hung in a wardrobe. Now you know what to do when preparing and how to stroke the trousers with arrows.

How to remove arrows on trousers?

Usually, hands on trousers are ironed beforehand before selling. But if necessary, they can be smoothed out. To begin with, the product must also be turned to the wrong side. The temperature on the iron in this case should be set at least as high as that at which the arrows were made. Naturally, it will not be easy to smooth the fabric, but with due diligence you will succeed.

We advise you to read an article on how to iron a shirt with a long sleeve