With the advancement of technology the quality of household appliances has improved considerably - manufacturers try to meet all the needs of the buyer, inventing and introducing new features into its products. During the ironing and fabric is important in its surface with which they come into contact. Its quality affects the quality of straightening things, and long service life, less tissue burns, remains supple and smooth.
Speculate about what outsole for iron is considered to be the best, inappropriate. Pick up and find out what the soleplate better, you can own, without the assistance of consultants. It suffices to understand the advantages and disadvantages of each coating surface of this device.
Content
- Criterias of choice
- aluminum coating
- Stainless steel
- enamel surface
- PTFE shoes
- composite options
- The ceramic layer
- Openings for steam
Criterias of choice
The soleplate must be moderate and easily to a man to slide on the surface of the fabric, take care of the productTo have uniform heating of all parts of the working surface to ensure proper temperature control, to have durability and strength. Further, the sole should be easy to clean, since with time on its surface can form a deposit of the melted fabric fibers.
The key criteria for determining the quality of the surface of iron is its material and shape. It is necessary to select the unit with the largest surface area. Everything in the world of home appliances there are more than twenty types of materials that are used during the manufacture of the soles. The main ones are:
- Aluminum;
- Polished stainless steel;
- Enamel;
- titanium coating;
- Sapphire;
- The Teflon layer, ceramic layer, metal;
- The composite surface.
aluminum coating
aluminum has excellent thermal conductivityAnd therefore, during ironing will be less energy is consumed. In addition, this coating irons pretty cheap.
The disadvantages of this material can be attributed low wear resistance (With time there is a lot of scratches) and the fact that the woolen things after the iron is still shiny trace of metal.
Sometimes, there are scratches or dirt gets formed scale, from which it is difficult to get rid of. As use of the damaged surface it has still smaller slip.
To resolve these problems manufacturers use pre anodized aluminumHe is undergoing treatment and coating of oxide film. This improves the quality of the sole.
With a small budget, with the purchase of iron should pay attention to mixture of aluminum and Teflon. This substance has a non-stick property, easy to iron woolens and easily cleaned of dirt of various kinds. However, the Teflon does not have a high wear resistance - can quickly wipe and also scratched.
Stainless steel
Polished stainless steel is in the same price range as the aluminum surface. it is more resistant to damageEvenly distributes heat and easily glides over all fabrics, leaving no trace. On the downside is the fact that it has a fairly great weight - quickly tired hands during ironing. However, in terms of price and quality stainless steel is the leader among the other types of soles.
Also manufacturers use sapphire deposition for this kind of surface, but then the cost becomes much higher iron. For better usability of iron with stainless sole manufacturers applied to it chromium. This protects the sole from corrosion and give longer life metal.
enamel surface
Coating the surface of iron enamel, which in appearance is more like a well-crafted granite, it allows a good slide on the surface and do not leave traces on the cloth. Such a coating of the sole is resistant to chipping, cracks or scratches, and purification takes place by means of a soft tissue without any effort.
The coating may peel off the soles, but by the time it is usually necessary to change the iron due to wear.
PTFE shoes
Teflon coating with properties similar to aluminum - this sole glides over the fabric is heated uniformly over the entire area of the form of iron, has non-stick properties. Teflon can be easily cleaned of dirt, but too quickly deforms and loses its original properties.
composite options
manufacturers Iron company paid attention to wear resistance the surface of composite materials. They are much stronger than aluminum or ceramic, glide over the fabric and does not scratch - so iron can be ironed, even metal buttons or zippers. It is also easy to clean.
The ceramic layer
Ceramic surface easily slides on the fabric, does not leave traces on silk or wool, easy to clean. The disadvantages of this type of surface can be attributed the fragility of the material and the cost of the device.
At the slightest cleaved or slight defect in pressing heavily impeded and a lot of inconvenience. The only way out of this situation - to constantly monitor the surface and to be as accurate.
Openings for steam
Most modern irons is equipped with small holes throughout the area of the sole. This is done so that the steam coming out to the surface and otglazhival tissue. The holes vary in size and location, but a negative impact on the quality of each type of surface do not have.
In some cases, they serve as an additional source of air, which helps to facilitate sliding. This makes it possible to cope with the harsh and unyielding cloth effortlessly by the user. Every manufacturer is trying to invent your own technique hole distribution system on the underside, positioning its product as the best invention, a revolution in the approach to ironing.
The main criteria for the choice of the shape and number of holes in it is:
- The presence of a sharp nose in iron. Such a form can have any iron - makes it easy to fine details ironed on clothes, as well as the area around the buttons or other accessories.
- Rounding out the bottom. It is this form prevents tissue wringing of the return movement.
- Trench on the perimeter. This ability makes it easy to iron to iron things with small plastic parts, not melted them.
Approaching iron selection We need, based on the analysis of everyday ironing - if too much stroking children's clothes or household items, the iron must be elongated shape of the sole.