Soda and vinegar for pipe cleaning

Everyone is now used to a certain level of comfort - reliable, regularly working plumbing, household appliances and other amenities of modern equipment of houses and apartments. How high is surprise, when suddenly draining pipes in a kitchen sink, in the bathroom or even worse - in the toilet clogged. Well, if the water just passed, and not all the stool and dirt go back to the expensive finish and ourselves. In such a situation, it's easy to get lost, especially if you do not know what to do with this trouble.

Do not panic! The solution to any problem is often very simple and convenient. For example, soda and vinegar for pipe cleaning are the best option if you do not have special household chemicals, a plumbing cable, or you are not a plumber. How to correctly apply these tools, you now learn from this article.

to the contents ↑

Soda and vinegar to clean pipes - what's the secret?

Soda is an alkaline salt, and acid is the catalyst, when exposed to a soda powder a violent chemical reaction. It is due to it that it becomes possible to clean the pipes.

Why does this happen? Many people know such a thing as extinguishing soda. During the interaction of these two ingredients, carbon dioxide is released. As a result, we observe a hissing with a small dosage, the formation of bubbles. And if you take soda and vinegar to clean the pipes in a larger amount, something like a mini volcano will erupt. He will fight your blockage.

Now from theory to practice - how to clean the pipes with soda and vinegar? We offer several solutions for different situations.

to the contents ↑

What can I clean with soda, vinegar?

As a rule, there are several most problematic places in the engineering systems of apartments and private houses, which can suddenly surprise you with their clogging and the consequences of such a phenomenon. These include:

• draining under the sink in the sink in the kitchen, as there accumulates fat, leftovers from products, ready meals;
• sink under the sink in the bathroom - hair, small dust, dirt, even small objects get into this room, which, when exposed to water, gets tangled in a single lump and causes poor pipe penetration;
• toilet drainage hole - this plumbing is often clogged if you do not follow the rules of its operation, for example, pour out a lot of berries from under the cooked compote, throw out personal hygiene items.

Important! To less often be puzzled by how to clean pipes with soda and vinegar, adjust the correct mode of using engineering systems. This is the most important thing that you can do for your own comfort, tranquility, coziness in the house.

to the contents ↑

Clean the pipes

The principle of using soda and vinegar for cleaning pipes of different purposes is similar - both substances must be launched inside the system. Some differences will arise only depending on the design features of the drain hole, its diameter.

We clean the toilet

If you need to clean the sewage system with soda and vinegar, in addition you will need a plunger.

Important! Depending on what caused the blockage, preliminary work may be required. For example, if it is a large object that is within your sight - try to take it out. Use with protective rubber gloves, so that it is not so unpleasant.

To act in this case it is necessary so:

1. Fall asleep ½ part of a packet of soda into the drain hole.
2. Fill the same ½ cup of vinegar.
3. We cover with a plunger - be careful. If the reaction is very violent, all dirt will come out.
4. As soon as you feel less pressure in the system, clean the toilet with a vantuz.
5. Release the water several times, make sure it passes well.

Important! Additionally, hot water can be poured in to remove residual contaminants on the inner surface of the pipes.

We clean the sink sink

Soda and vinegar for cleaning the tubing in the bathroom or in the kitchen is an even simpler solution, since the diameter of the pipes is smaller and does not have to bother so much when cleaning:

1. Pour ½ pack of soda.
2. Fill with ½ tbsp.vinegar.
3. Plug the drain hole of the trowel, rag or cork - this is necessary for the reaction to take place inside the piping system. That is, that carbon dioxide is not released.
4. Wait for 15 minutes.
5. Drain a large amount of hot water.

Important! If the obstruction of the pipes still remains, try replacing baking soda with calcined water - it is more caustic and aggressive. But take 2 times less of this means, so as not to damage the pipes. The principle of use is the same as described.

to the contents ↑

Useful advices:

1. Instead of vinegar or soda to clean pipes, you can use other tools that you have available - salt, tartar.
2. If the fast reaction does not give the perfect result, act longer. To do this, fill 1 packet of soda into the drain hole of the sink, pour 1 liter of boiling water into it. Close the hole, leave it at that for at least 2 hours, preferably at night. Pour in the vinegar( ½ cup), rinse with plenty of water.
3. To prevent clogging of the pipes, periodically disassemble the siphon, removing the accumulated dirt and grease from it.

We hope that now you are more relaxed about blockages in the pipes and you can effectively deal with them using such simple means as soda and vinegar. Let nothing break your comfort zone in the house and there is always only coziness, calmness and beauty in it!