- Reasons for the appearance of mold:
- Mold remover
- What you need to do to prevent mold
As you know, in places with high moisture, mold often appears, which is the causative agent of many human diseases. Therefore, it can not be left on the walls, and besides, it spoils the finish and there is an extremely unpleasant smell with dark spots. It is necessary to investigate the cause of the appearance of the fungus in order to understand how to get rid of mold in the apartment on the walls. In an apartment it is not difficult to do it - you just need to carefully examine all possible places of education. Then effective methods of struggle will become clear.
to content ↑Causes of mold appearance:
- The most common cause of mold appearance is high humidity in the room and lack of ventilation, because mold is a fungus that loves moisture and grows even more in its presence.
- Also the reason can be raw houses or too many tropical plants.
- Very often mold appears in the apartments on the ground floor because of the dampness that pulls outside and out of the cellars of houses.
Mold can be anywhere:
- In the first place you can put a bathroom, because there is a constant moisture.
- Next, we have a toilet, air conditioning filters, voids under the wallpaper in which moisture accumulates and even a refrigerator.
Important! The first sign of the appearance of moisture is a strong smell of dampness. Then there are spots of gray and dark colors. As soon as you notice the fungus, you must immediately take up its destruction, otherwise - after a while you will have to do a major overhaul.
So, how to get rid of mold on the walls in the apartment with your own hands, and what tools to use to remove it?
to the table of contents ↑Mold remover
There are specially designed antibacterial agents for removing these unpleasant parasites that will help us - most often they can be purchased at construction stores.
Important! It is necessary to adhere to the instructions for their use, because by themselves for a person they can also be harmful.
Primer-antiseptic
This is a special primer, which treats the surface of the walls from the appearance of mold and other harmful accumulated substances. Before you start using it, clean the place where you found the fungus before completely removing it. Next, treat the wall with this solution using a paint brush, following the instructions for use from the manufacturers.
Bleach
This method is suitable for well ventilated rooms. Before starting the process, be sure to put the gloves on your hands and dilute 1 part of bleach with 10 parts of water.
Important! When you finish the treatment, be sure to ventilate the room well.
Table vinegar
Vinegar is a weak acid that can remove many kinds of mold:
- It is necessary to apply it to the wall with a spray or a normal cloth and leave for a couple of hours.
- Then gently rinse the wall with water and ventilate the room.
Important! For prophylaxis it is sprayed once a week on the problem area of the wall .
Hydrogen Peroxide
Hydrogen peroxide can be purchased at any pharmacy. It is a non-toxic remedy that does not need airing rooms. But, nevertheless, it has a whitening effect, like any household bleach, so you need to apply it carefully.
Ammonium alcohol
This remedy removes fungus very well from hard surfaces, but it does not work well on porous surfaces.
If you need to get rid of mold on the walls in the apartment, and the finishing materials fully meet the requirements:
- It is necessary to dilute the alcohol halfway with water and spray for several hours.
- Then rinse the treated area with clean water.
Important! Ammonia can cause headache and an unpleasant feeling in the throat, so it is not recommended after treatment to be indoors. Also it is impossible to mix it with bleach, because when they mix, a toxic gas appears.
Soda food
Take a teaspoon of soda and dilute it with a glass of water, then spray on the affected area.
Important! Soda can not be washed off, because it is harmless to others and, in addition, protects the wall from the repeated appearance of mold.
to the contents ↑What you need to do to prevent mold
To prevent mold from appearing every time you clean it, you need:
- Lower the humidity level in the room.
- Regularly ventilate rooms in the house and do not allow air to stagnate.
- Check the hoods and conditioners to ensure that they remove excess moisture in a timely manner.
- Arrange furniture so that it does not stand against the wall.
- Regularly wipe surfaces when condensation occurs.
- Check the heating system before the onset of cold weather.
These tips will help you avoid the appearance of mold and help get rid of the fungus on the walls in the apartment and the private house on their own. We hope that you successfully managed to overcome pests and they no longer create their colonies in your housing.