Best Tile Cutting Reviews

Tile gradually, day by day, is becoming more popular. Long ago, when it was glued only in the kitchen or in the bathroom. Now the tile is used in swimming pools, steam rooms, public catering and many other establishments. Yes, there to say, even on the sidewalks are increasingly stacking tiles! Did you pay attention to the platforms of large railway stations? There, too, can be placed tiles. But work with this material can not be imagined without its circumcision. For this, among others, tile cutters are used, which we will discuss in today's compilation.

Tile cutter of which firm to choose

Tile cutter is a serious tool, most often working from electricity. It has not only a saw blade, but a workbench. In this regard, for the production of tile cutters only large companies are taken. They do their job qualitatively and do not have problems with the delivery of goods to the relevant stores. We recommend that you do not pay attention to the products of little-known companies. She often breaks down, and sometimes even inflicts trauma on the employee. Yes, and with the delivery of such a tool under the guarantee there may be problems, whereas the service centers of large manufacturers are available even in not the largest cities.

In our country the most popular tile cutters of the following companies are:

1. Husqvarna

2. Matrix

3. Elitech

4. Fubag

5. DIAM

This, of course, does not end with the list of major manufacturers of tile cutters.

The best electric tile cutters

Husqvarna TS 66 R

This tool can be safely called professional. For its installation in the room, reliable feet are used. If necessary, various improvements can be made to this tile cutter. But in the standard form the device has almost everything you need. For example, it includes a pump supplying water to a circular saw. It is possible to adjust the flow until it is completely stopped. The saw itself here is moving along the rail, which is located above the bed. This indicates that the sawing process is controlled without any problems.

Some disappointment in the buyer can cause only the absence of rulers, because of what it is necessary to cut the tile "by eye".But we must not forget that the rulers can be installed on their own - for this purpose there are plant stops. But the problem of the high cost of tile cutting can not be solved. But how can a professional tool cost cheap?

Pluses:

• Circular saw is supplied with water;
• Reliable and stable feet;
• Easy maneuvering of the saw;
• Water supply is adjustable;
• Minimum number of chips.

Disadvantages:

• Water may be slightly splashed during operation;
• In the complete set there are no rulers;
• Many will not be afforded.

ELITECH PE 600

Excellent tool with unlimited cutting length. His work is carried out with a 180-millimeter drive and an electric motor, the power of which reaches 0.6 kW.The disk is diamond, it perfectly copes with the processing of porcelain stoneware and ceramic tiles. Also included in the tile cutter is water-free water cooling. By the way, the machine is absolutely not afraid of contact with water, because it is made of high-strength plastic - there's really nothing to rust here. The working table is additionally covered with zinc, for greater beauty it is powder-coated.

Advantages:

• Has no limitations in terms of maximum cutting length;
• Convenient work;
• A reliable diamond disc in the kit;
• High power motor;
• Implemented water cooling.

Disadvantages:

• Not the most beautiful appearance;
• May seem too massive.

DIAM SP-200 / 0.8 600030

One of the most advanced electric tile cutters. The tool stands on secure feet. If necessary, it can provide a 500 mm cut length. The diameter of the saw blade is 200 mm. As for the landing hole, its diameter is 25.4 mm. The diamond circle here can be turned, which is extremely unusual for tile cutters. The angle of rotation can reach 45 degrees. This engine is powered by a 0.8 kW motor. It spins the disc to a speed of 3000 rpm. In short, the tool does not have any serious drawbacks. You only need to make sure that the water in the pan is clean. Also, it does not hurt to stock up on headphones, as cutting tiles is noisy.

Advantages:

• Cooled with water;
• The kit comes with a very good drive;
• High-speed snap rotation;
• It is impossible to find fault with the engine power;
• Diamond turn is available;
• Stable construction.

Disadvantages:

• The work is noisy;
• Very high cost.

Rubi ND-180-BL

This device belongs to the family of inexpensive tile cutters. However, even such a tool is quite suitable for professional use. The main advantage of this model is easy transportation. In assembled form it is housed in a relatively small suitcase! At the same time the device copes with the "sin" and tile. What is important, the instrument works without unnecessary noise, and it spends the water very carefully - it does not splash at all.

Unfortunately, the Rubi ND-180-BL tile cutter is far from being an ideal. First, the buyer may not like the complete disks. Secondly, the ideal appearance of the desktop is lost after the first operation. But with all these problems it is quite possible to reconcile.

Advantages:

• Very easy transportation;
• High reliability;
• Relatively low noise level;
• Built-in powerful electric motor;
• Do not spray water around.

Disadvantages:

• Some types of tiles do not lend themselves to the device;
• Complete disks should be changed immediately.

Fubag PK 30 M

One of the most expensive electric tile cutters. It has very large dimensions, and for cutting it uses a 300 mm disk. All this allows you to cut the tiles of almost any size. The manufacturer declares that the length of the cut is not limited in any way. Looking at the design of the device, it is difficult to doubt these words. Separately, it should be noted the engine - its power reaches an impressive 2.2 kW.The power of this motor is enough even to ensure that the rigging is not bogged down in the finishing stone. And we will keep silent about the usual tile, since the disc is moving along it, as if by oil.

Advantages:

• The work table has a zinc coating;
• Warranty from the manufacturer is two years;Incredibly powerful engine;
• The tool copes with any material;
• You can work with tiles of any size;
• Water cooling greatly reduces the amount of dust;
• The disc has a 300 mm diameter.

Disadvantages:

• The cost may seem prohibitive.

Practice 1872

The simplest tile cutters from the Russian manufacturer. This is the worst option for professional use. But if you encounter cutting tiles very rarely, then you can perfectly arrange such a tool. You just need to prepare for the fact that from time to time the design will have to be modified, since there will necessarily be minor breakdowns. As for the possibilities of the device, you could easily guess about them yourself. The tool cuts the ceramic, dipping disc into a container with water. The working surface is made very well - it is smooth, which ensures a good stroke of the tile.

Advantages:

• Minimum price for electric tile cutting;
• A smooth working surface is used;
• There is a tray where water is poured;
• Very small size and weight.

Disadvantages:

• Small breaks occur regularly;
• A perfectly smooth cut is rarely achieved.

Best hand trowel

BATTIPAV PROFI 100 ALU

This tile cutter differs from many analogues in that it is tame. At the same time it is much more expensive than a lot of electric tools! High cost is due to the fact that the quality of the cut is not inferior to electrical products. At the same time, he does not need an outlet, which makes it possible to work even somewhere on the street, arranging the facade of the building, stopping public transport or a fountain. The maximum tool provides a cut length of 1030 mm, which in most cases will be quite enough. It can cope with both traditional ceramics and porcelain stoneware. The weight of the tile cutter is 14.7 kg - it can not be called light. The maximum cutting depth is 15 mm.

Advantages:

• The kit includes an expander;
• Cutting roller of excellent quality;
• Monorail was created from hard and strong metal;
• Does not require an electrical connection;
• Copes with both ceramic tiles and porcelain tiles.

Disadvantages:

• Employer effort required;
• Astronomical price tag.

Which tile cutter to buy

1. Many professionals call Husqvarna TS 66 R the best choice. This tool cuts the tile precisely, practically avoiding chipping. To facilitate the process, water flows on the saw - its flow is regulated by the worker. Everything is in order here and with legs, which are attached very reliably( and when transporting the tiles they are easily untwisted).

2. ELITECH PE 600 is a good choice. This tile cutter is quite massive, but thanks to this, an unlimited cutting length is realized here. The instrument also received water cooling. The diamond disc included in the tile cutter has a 180 mm diameter.

3. DIAM SP-200 / 0.8 600030 is more expensive than many competitors. But it works without any complaints. The device has a 200-millimeter circle and water cooling. Practically any tile is cut by this tool smoothly and quickly, if it happens, it is extremely rare. In a word, this is the best choice in the event that you process the tile almost every day!

4. If you regularly work with tiles on the road, then you might need the Rubi ND-180-BL.This tool can be taken with you even in a small room. Tile cutter easily fits in the trunk, as when folded, it turns into a relatively compact suitcase. However, the buyer is advised to purchase a third-party tool, as the supplied disks are of questionable quality.

5. When working in conditions of missing electricity, it is necessary to look towards manual tile cutters. One of the best tools of this kind is BATTIPAV PROFI 100 ALU.It is able to cut diagonally a tile measuring 720 × 720 mm - this indicates that the product is ideal for facade cladding work.

6. The ideal tile cutter is the Fubag PK 30 M. This device quickly cuts not only ceramics with porcelain stoneware, but also a facing stone! As it is supposed to such a tool, it has water cooling, which reduces the temperature of the disk and reduces the amount of dust that arises. The size of the tiles processed here is practically unlimited. Only the amount that sellers ask is confusing.

7. If you do not treat yourself to professionals, then we advise you to buy Practice 1872. This Russian tool may well please you by its simplicity. The device is inexpensive, while it copes with any ceramics. The problem is that the tool can not provide a smooth cut-it is because of this that the professional will not even look at this model.