Can laminate, linoleum and concrete be painted

In principle, it is quite possible to paint concrete, laminate, wallpaper and even linoleum. But here's how to do it so that the result looks decent, and does not disgrace your home? You just need to know some of the nuances in working with each of these materials, and everything will work out. Let's deal with each case separately.

Read in the article

  • 1 How to paint laminate
  • 2 Is it possible to paint ceramic tiles
  • 3 What happens if you paint linoleum
  • 4 How can concrete be painted

How to paint laminate

What is laminate - in fact, it is thick cardboard covered with a moisture-resistant layer. This is what presents the problem when painting. Before painting, this layer must be treated with fine emery to ensure adhesion to the paint. This job is dirty, so get ready to remove fine dust. The task will be greatly facilitated by a grinder. After such treatment, the laminate will lose some of its water-repellent properties, but the paint will make up for the loss. It is best to thoroughly vacuum and wipe the floor with a damp cloth before painting.

Can laminate, linoleum and concrete be painted
PHOTO: dzgo.ru
It is necessary to paint only after complete drying of the surface and treatment with a deep penetration primer

Not every paint is suitable for laminate flooring. Do not use oily and water-dispersed ones. The best results are shown by alkyd and polyurethane paints. After painting, the surface should be varnished with the same base.

Is it possible to paint ceramic tiles

Only porcelain stoneware does not tolerate painting - its surface is so resistant to external influences that the paint simply does not stick to it. There is no point in wasting paint for tiles that are constantly in contact with water.

But in all other cases - why not? As with the laminate version, the tile surface must be prepared for adhesion by sanding. After processing and removing dust, the tiles are degreased with a solvent and only then a primer based on epoxy resin is applied - this composition will allow you to keep any paint. This primer dries for 24 hours - so don't be in a hurry.

Prepared tiles can be painted with oil paints and paints based on latex and epoxy
PHOTO: design-homes.ru
Prepared tiles can be painted with oil paints and paints based on latex and epoxy

There are also special paints for ceramics on sale, but for large surfaces it is very expensive.

Do not paint the tiles with a brush - use a foam roller or spray is better.

You can apply patterns and ornaments on the tiles using a purchased or self-made stencilPHOTO: nastroy.net
You can apply patterns and ornaments on the tiles using a purchased or self-made stencil

The finishing stage of painting is necessarily a varnish on the same basis as the paint.

What happens if you paint linoleum

Actually, of course, painting linoleum is not the best idea. The fact is that the material itself is short-lived - over time it becomes hard and brittle, in especially passable places it is erased almost to the point of holes. But if there is an urgent need to quickly update the floor before buying a new material, then you can paint it.

For this coating, acrylic enamels are the best choice. They hold well, and besides, they do not have a pungent smell, like alkyd-based paints.PHOTO: floor-guru.ru
For this coating, acrylic enamels are the best choice. They hold well, and besides, they do not have a pungent smell, like alkyd-based paints.

To prepare the surface, linoleum is rubbed with soda moistened with warm water. Cracks in the material can be simply filled. Acrylic primer is used before painting.

Combined colors can be used to diversify the drawing.

How can concrete be painted

Concrete is the easiest to paint. It accepts water-based paints, silicone and rubber paints well. If you need to paint concrete outside the building, then oil, alkyd and silicate paints are the best choice in this case.

When working with concrete, surface preparation and soil treatment are also important.PHOTO: beton-house.com
When working with concrete, surface preparation and soil treatment are also important.

If there are efflorescence on the surface, they are treated with copper sulfate and primed after grinding.

How to paint a concrete floor - in this video:

Have you tried painting linoleum, laminate or concrete and tiles? Share your experience in the comments!

Discuss0

the handle with nuts will look great on the locksmith's locker at his work ...

I like to use mineral wool like Ursa or Isover. After laying, no need to knock out ...

Why just off the beaten path? And if in a city where there are public utilities, firms, and so on ...

and what is this nonsense? author, have you ever seen these shells with your own eyes? …

There was already one such, even three exhibition buildings, then collected money from customers and ...

Why does the author attribute sanitary ware to stone sinks is not clear!? Stone is stone ...

I read it to the point where the author says that the foam does not dry out and does not absorb water... …

Do not clap your hands, it is important HOW they connect. It often turns out like this "plugged in ...

Not at all. All photos from the Internet. For the middle band, 99% is not suitable. And the prices will get ...

For heating to zero, it is more efficient to air-to-air, and to heat with a boiler at lower ...

and where have you seen stones for nothing? Minimum RUB 100 1 kg. You will pack a lot for nothing. Wrote nave ...

Beautiful, not stupid, but I don't see her, I understand, there are a lot of triggers and engrams, och ...

My bathhouse is made of bricks and plastered. The steam room is pasted over with simple foil ...