The brake pad rating for 2016 cars includes products from those companies that have proven themselves in the tests only from the best side.
10
Samko
Brake pads of the Italian company Samko open the top ten products of this line. Samko products have a non-asbestos composition, a high coefficient of friction, which does not vary with temperature;minimum abrasiveness, high thermal stability and noiselessness. Assortment of Samko is offered for cars of European, Japanese, Korean, Russian and American production. The quality of the products is certified by international certificates DNV and ISO, as well as by the Russian quality certificate. Gost R.
9
Bosch
Brake pads for Bosch cars entered in 2016 in the rating of the best. They include about 20 components. Approximately 20% is made up of binders: artificial resins and natural rubber. Steel is copper, zinc, bronze, aluminum - 10%.Carbon fiber, synthetic fibers and mineral wool are about 10%.As fillers, oxides AL, FE and Na sulphate are used of about 25%.35% make up the components of the form: graphite, Cu and Al sulphides. The range of products BOSCH meets the strict requirements of automakers on the uniformity and stability of characteristics, the behavior of the car at high speeds, durability, and freighting.
8
Sangsin HAGEN
Sangsin HAGEN - brake pads for foreign cars of the highest quality. Thanks to the introduction of high-tech materials and friction components HAGEN have high wear resistance. Using organic compounds, SANGSIN BRAKE has created brake pads containing aramid and mineral fibers, which gives a special plasticity to the friction material, makes braking more smooth and predictable, extends the service life of the brake by 150%.The resource declared by the manufacturer is 35 thousand km.
7
Nisshinbo
Brake Japanese pads Nisshinbo for foreign cars are known all over the world and were in 2016 in the rating of the best. The products of this company have wide areas of application - from cars, sports cars and to heavy trucks. A distinctive feature is the fact that the brake pads are made to high world standards using a unique "ferodo" material, designed for any conditions of operation and a long service life. In addition, the emphasis on the development of brake system materials is based on the use of asbestos-free materials with the addition of expensive micronutrients.
6
FERODO TARGET
FERODO TARGET( TAR) is a series of disc brake pads for cars that is manufactured using advanced friction materials designed to provide optimum braking performance under various driving conditions. They are specially designed for deliveries to the market of spare parts when the price is of key importance. TARGET fully comply with all modern requirements of manufacturers for reliability and quality.
5
Kashiyama
Kashiyama - the best Japanese brake pads used for many passenger cars, SUVs and light trucks. The predicted reaction when braking the car, the absence of brake dust from the pads on cast wheels, as well as the lack of creaking - the main indicators of the quality of the product Kashiyama.
4
Hankook FRIXA
Ruler Hankook FRIXA is listed in the best brake pads for cars to date. In general, the products are intended for Korean cars, which makes the company a strong player in the domestic market of primary and secondary products.
The Frixa brake system components are designed at the Hankook Tire Research Center in Daejeon and are manufactured at the main plant in Suncheon, that is, products are manufactured exclusively in South Korea. A distinctive feature in the production of brake pads and linings of Frixa company is the use of Kevlar fiber. This component ensures the durability of the brake discs. Even at high loads, the discs wear out 2 times less, compared to the products of other manufacturers.
3
ATE
Brake ceramic pads of ATE for foreign cars open the top three in 2016.ATE Ceramic is designed to extend the life of the pads, reduce noise and eliminate dust from the brake pads. Numerous ATE tests have shown that the Ceramic product meets all standards and requirements for the original shoe in all operating modes. ATE Ceramic certified for use in original car brake systems. It is believed that the ceramic pads effectively brake only in the warmed state, but ATE Ceramic are specially designed for use in standard brake systems on public roads, so they work equally effectively at all temperatures.
2
Allied Nippon
Allied Nippon are recognized as one of the best brake pads for foreign cars in 2016.The ruler is designed especially for difficult operating conditions in the urban cycle of driving, associated with constant acceleration and braking. And the priority pads Allied Nippon are designed for use in the braking mechanisms of heavy vehicles and SUVs. The main tasks - reducing wear and increasing the coefficient of friction - have been solved by using the technology Ferro Carbon - a mineral metallic. Currently, this group includes 150 names of pads for cars of different brands and models. The friction linings of all the pads of this group are manufactured using the non-asbestos mixture NAM114, which, thanks to the company's latest technological developments and specificity of its composition, has a number of advantages over analogues of other manufacturers.
1
ABS
ABS top the rating of the best brake pads for foreign cars 2016. The company All Brake System was founded in 1978 and is one of the leading European specialists in the production of brake components. The assortment of the company includes more than 1500 products, covering a full range of passenger cars and light trucks of European, Japanese, Korean, American production. All products of the company comply with the requirements of TUV / ISO quality systems, which is confirmed by the relevant European certificates.