Self-made machines and appliances for the home studio

Nice to see, when a person has done all furniture and other items of everyday life with his own hands. To simplify the process of cutting metal or vypilki elements of wood, constructing improvised machines and appliances for the home studio. This solution not only saves time in the production of goods and money for the purchase of finished tool. Several practical and exciting options discussed below.

How to use self-made machines and appliances for the home studio

The use of self-made machine tools and accessories for home workshop is aimed at solving several problems:

• Simplification metal processing. During the creation of everyday objects often need carver press or metal.
• Improvement of the treatment of wood. Even to build a small shed or make wooden shelf for homeis needed electric saw and others woodworking tools.

Buy a ready tool is quite expensive, so use improvised tools and devices for garage becomes every day more and more urgent. Among the most common variants of household tool release:

• Workbench;
• a device for rapid sharpening of knives;
• a device for sharpening drill bits metal;
• drilling machines;
• press;
• cutting drum machines.

Here are a few photos of tools and devices with their own hands by "diy":

1 of 4

Practical shelves for tools with their own hands

Before the creation of devices and tools for working with their hands decide where to store all the devices, so you do not search the entire workshop or garageWhere everything is. Make a shelf for tools with their own hands is simple, most importantly, decide on its size and manufacturing material.

The easiest way to make the shelves - bring them out of wood. Do not forget about the need to cover the finished design or protective lacquer paintTo prevent rotting and swelling of wood.

It is possible to create a combined variant shelving of metal support and the wooden shelves. Here are detailed instructions for the creation of a self-made model:

Picture	Sequencing
	Collect frame. To do this, prepare two side frames, which consist of 4 ex-corners. Connecting elements using screws. Then subtended between a frame 2 using 4 corners.
	When the frame is fully assembled, go to the production of shelves. They can be made of wood or metal and other dense materials at hand. Enough to cut fabric of suitable size and attach them to the metal substrate.
	If desired, you can make a mobile rack, securing four small wheel. Or permanently install it in the allotted space in the garage.

You can find other interesting projects and drawings for the manufacture of shelves for tools. Watch the video on the topic:

And also to make their own hands useful devices for the household:

1 of 4

We do wood working bench with his hands on the drawings: video instruction and photo examples

Among common devices for the carpentry workshop with his hands isolated bench. Durable and marker tableAllowing the workpiece securely, useful for high-quality cut wood and create from it a variety of items.

The package unit includes:

1. Working surface. For it uses solid woodTo increase the life of the device. The thickness must be at least 6 cm.
2. Support. Collected from the wooden beams or metal plates. The main task - to ensure the stability of the whole mechanism.
3. Vise to secure the product. If the table is long, you can install just two clutches.
4. Tool box. Useful recess or retractable design that provides quick access to the necessary small parts.

In order to build Workbench for his workshop, you should choose a drawing to buy material to work with.

Drawings carpenter's bench with his hands

Before buying materials to build your own workbench, you should consider the detailed drawing. It should include the size of the machine, it is advisable to note the dimensions of the materials used and their quantity.

For example, the finished drawing foldable bench with his hands might look like:

Whichever model to build you choose, keep in mind a few features of the desktop, providing the convenience of cutting wood:

• height and length of the master hand: these parameters depends on the height and width of the table top;
• what kind of hand work: positioning the vise on the right or the left;
• which blanks are made: the choice of the table forms;
• what area in the room allot to the bench.

Given all these options, it will be easier to determine the Workbench drawings and dimensions of the machine. Here are some interesting examples:

Instructions for assembling the wooden bench with his hands

You can buy a wooden bench in a store or through online catalogs, but cheaper to do it yourself. Let us take as a basis for a simple version with standard countertop dimensions: length - 150-200 cm, width 70-120 cm.

Work on the production will involve several stages:

Picture	What need to do
	The top cover make of thick boardsTo shield turned width from 70 to 200 cm. The fastening elements on long nails, and it is necessary to drive them from the outside and from the inside carefully bend. The working surface of the bench is made only of wood or Particleboard.
	Obsheyte cover the lower perimeter beam 5 by 5 cm. So it will be convenient to mount the vertical supports. The size of the countertops depends on the location of the poles. They are best made from a thick rectangular timber at least 120 by 120 mm.
	Install Workbench need to correctly. Be sure to firmly secure it. If it is mounted on the street under a canopy, then dig holes for poles. Indoors, you use other methods of fastening.

When the structure is assembled, set her clutches. To fully understand how to build a wood working bench with their hands, look the video:

Manufacturing cabinet vise for bench with their hands

Professional "diy" collect not only tables for work, but also clutches his hands according to the drawings. In any design of the clip will include several elements:

1. Supports, wherein each clamp have sponge.
2. Moving jaw.
3. Runners of metal. sponge moves over them.
4. The lead screw for moving elements.
5. Knob. Needed to rotate the screw.

various materials at hand can be used in the manufacture of home-made clutches of his hands. For example, there is an option of the design of the profile pipe. To do this, prepare several different-sized tube sections, a steel pin with a large double threaded nut.

Instructions for creating verstalnyh clutches of profile pipes:

Picture	What need to do
	The biggest pipe acts as a body. To her bottom soldered supports. The back side is put on the flange of steel 3-4 mm. In the center of the hole is drilled to a lead nut, and opposite front leg welded sponge back.
	The inner movable part welded Front steel flange. It is mounted stud with fixed on it with locking nuts. Since the two sides are put on the flange thrust washers. The final element - movable tube, attached to the front jaw.

Also watch the video "vises with their hands at home":

Drawings bench bench for its metal arms

Metalwork metal workbench large differences from the carpenter has not. At the core of rigid metal, rather than a wooden frame. To him attach a vise, and the entire bench is designed to withstand the force of impact with a sledgehammer.

Metal benches with their hands may have one, two or three tables, as well as not have shelves and drawers for small items. As for the strength in the garage can be made from conventional metal table to 5 mm thick and reinforced construction, where applicable sheets 10 to 30 mm.

Here are some drawings for manufacturing metal bench for his workshop:

How to make a device for sharpening knives with your hands: the drawings and photographic examples

Without a knife in the kitchen can not do any house. right sharpening without special tools to make quite difficult: it is necessary to observe the correct angle and achieve perfect sharpness of the blade.

Each knife must comply with certain grinding angle:

1. Razor and require scalpel angle 10-15⁰.
2. Knife for cutting bakery products - 15-20⁰.
3. Classic multipurpose knife - 25-30⁰.
4. Hunting and hiking take the device with a blade angle of 25 to 30⁰.
5. If you want to cut hard materials, make sharpening angle in 30-40⁰.

To provide the desired angle, it is necessary to buy or make a device for sharpening. For example, you can collect the winepress of the engines of washing machines with his own hands.

Comment

Andrew Feofanov

recruitment specialist tool "VseInstrumenty.ru"

Ask a Question

"If you use the sharpening every day, it is enough to 1000 revolutions per minute for high-quality results and a long service life of the device."

To build such a machine useful motor from "stiralki" 200 watts. Completely to create the winepress of the engine from the washing machine prepare:

• the motor itself;
• a metal casing for a thickness of 2 to 2.5 mm;
• duct flange;
• stone for sharpening;
• nuts;
• trigger;
• cable for connection to the mains;
• Area of ​​metal or timber wood for the frame.

Step by step description of the manufacture of the machine can see in the video:

There are simple grinding machines with their own hands without engines. For example, it is possible to make the adaptation of the bars. To do this, prepare two abrasive bar of the same size and stone for sharpening.

Progress on the creation of such a simple device is as follows:

• Sand bars of wood with sandpaper, removing burrs. Make the layout depending on the desired angle.

• To attach the stone incised line to give the blade sharpness. To do this, attach it to the bar and mark its width. Next, in layouts make cuts up to a depth of 1.5 cm.
• The recesses obtained fasten the abrasive bars, to grooves coincide. Then, set the stone for grinding, spinning it on the screws.

Methods of making home sharpener for knives lot. Incorporates appropriate and try to create a convenient and useful tool for the home.

How to make a device for sharpening drill for metal with their hands

Make yourself not only the winepress for the blades, but also the machine for sharpening drills on metal. Here are some drawings that are useful for:

To understand how to make your own drawings machine for sharpening drills, see the video on the topic:

Making the drilling machine for home workshop

"Diy" tinkering with his own hands, and drill press. Samodelnoeprisposoblenie would do well with the manufacture of the various openings in your home studio, and the quality will at the height, if you collect the right equipment.

The easiest and most common form of such equipment for the garage - it's a converted drill. To work needed:

• frame to the base;
• a rotation mechanism;
• vertical stand.

Rack usually used Particleboard or boards. The mass of a small drill, so no need to use metal. In this case, a frame needs to be done massive to reduce vibration during operation.

To properly connect the base frame and the upright, as well as to collect all the equipment in one whole machine, pay attention to the video instructions:

Dimensional drawings for drilling machine with their own hands

To properly make any machine or practical device for private use, should first make a drawing with dimensions. Only then proceed to the preparation of materials and assembly of the apparatus.

Here are some examples of drawings of drilling machines drill their own hands:

And you can also make homemade vise for drill press. Below is a video guide on assembling such a device:

Related article:

Woodworking machines for home workshop. They can be purchased in a specialty store or make your own from scrap materials. Let's talk more about the second method of arrangement of its own corner to work.

press Options for the garage with his hands

homemade press Garage can process a variety of products and materials under pressure. Structurally, the equipment consists of a cylinder. The garage is a machine is useful for fastening or alignment of the various elements, as well as for bending metal sheets or compact cardboard.

For private use enough performance to 10-15 tons. Most often used bottle jack is provided with a hand pump, which acts as the primary structural element.

Here are a few interesting options presses for garages from "diy":

Press your hands out jack: drawings and production versions

Create a homemade press ram of two ways:

• lock apparatus based on the frame to exert pressure upwardly;
• setting jack closer to the top of the frame for downward pressure.

Here are some drawings to create your own home media:

To choose the right model and size of the future of media, need to consider a few points related to the jack itself:

• its dimensions;
• value of the working stroke;
• section thickness;
• the height of the blanks for pressing.

See how to gather news from the jack with his hands in the video:

Doing their own hands detachable disk for machine tools for metal-Yourselfers

drum machines - useful devices in the household. With their help, you can quickly cut any metal at an angle of 45 or 90⁰. To mount such a device is required on a rigid base. If you put another drive, you can work with all kinds of materials, not only with metal sheets. Buy ready-made setting is quite expensive, so it is easier and more interesting to make the machine with their own hands.

In a simple embodiment of creating a homemade disc cutting machine will need the following materials and tools:

• metal angle №25;
• channel №10;
• shaft and profiled tube;
• welding machine;
• bearing;
• an electric motor and a box for the wires;
• trigger coil and drill.

After preparing all the tools and materials for your own machine you must choose the appropriate self-made drawing on metal cutting machine. His hands can make instruments as follows:

Fellow machine for cutting sheet metal on the basis of Bulgarian easy if you know how to work with different tools and are ready to cut the workpiece. Progress on building a custom cutting machine is as follows:

1. From the corner cut blanks for the frame, the dimensions of which should be 40 * 60 * 120 cm. Cook elements in a common framework. A weld as a guide channel.
2. On channel attach a pair of racks in a vertical position by means of bolts. Must be made from a pipe frame 45 by 60 cm for the installation of the motor and the shaft.
3. On the back of the frame set the saw with the engine. It is better to choose an asynchronous motor with a capacity of 1.5 to 3 kW. Next, make a shaft flanges, pulleys and bearings. When the flange protrudes only 3.2 cm.
4. Secure the bearing on the shaft, in the same place and secure the pulley support. Assemble the box with the circuit diagrams below frame. Then, on the long part of the rocker fasten the tool, and a short engine mount. Connect the motor and the shaft with a belt drive, and your device is ready.

To fully understand the entire sequence, watch the video, how to make a cutting machine of Bulgarians with their hands:

Related article:

to make bender for profile pipe with his hands - study the detailed instructions, videos, photos, drawings from this review. to implement the corresponding project is not difficult to use these materials.

A bit of advice

Home workshop or garage stocked - the pride of amateur work with your hands. To make the instruments and devices with their own hands is necessary to choose the right materials and manufacturing drawings.

Among the most common variants of home equipment can be seen not only the grindstone knife, press or machine for cutting metal, but other options are available:

• Device for bending pipes;
• machines for working with wood;
• a lot of accessories for the garden;
• juicer for large volumes grapes and more.

Which option for decorating your garage, you would not have chosen, you should consider a shelf for tools or equipment boxes. The main thing is to use a device, made with his own hands, it is convenient, easy and secure.

Do not be afraid to experiment and turn the available materials and tools are useful tools for your home workshop and garage.