Ladder shower in the floor under the tile: Correct installation with no errors

High-quality pallet with integrated drainage system is expensive. But with the implementation of the same functions to cope perfectly ladder shower in the floor below tiles. You can install it with his own hands, saving further. This project will make it easier to implement after a careful study of this article. There is not only an overview of the different structures, but also detailed instructions for assembly work.

basic definitions

This is a special product designed to remove liquid from the floor shower. It also holds large mechanical particles to prevent the formation of blockages. With it prevents the penetration of odors sewerage system. The following characteristics distinguish trapik good for the soul:

• Appearance it is neutral, so it complies with decorative trim different styles.
• And coating materials have good resistance to household chemicals, detergents. Aesthetic and functional characteristics stored for a long time without significant precautions and restrictions.
• The product can withstand without damage to mechanical loads.
• Its performance is sufficient for quick draining, so the water does not accumulate on the floor.
• Avoid any unnecessary difficulties in during cleaning.

These features can be used in the selection of suitable products in the trading network.

Advantages of the shower without shower tray on the floor

It is necessary to clarify why such a solution really makes sense. pallets is formed from a metal or plastic. With a relatively small wall thickness of some models emit noises deformed. Such products are produced in a certain size, which complicates the selection of an exact match specific requirements.

Floor drains for floor ceramic tiles It has the following advantageous characteristics:

• This design is created in strict accordance with the design features of the environment. It seems appropriate in certain interior.
• possible to create a small or large if desired cabin, Set inside a seat, "rain" shower, and other accessories. Lack of limiting parameters leads to a particular form of the site.
• Quality ceramics concrete basis - it enhanced reliability. Such a structure is destroyed after decades of continuous operation. Effortlessly care it will retain the aesthetic parameters in excellent condition.
• Sam ladder shower in the floor below tiles It is set in such a way that does not feel any undue influence.

Related article:

Tiles for the bathroom: photo, design. It is an option for the finishing of walls and floor areas with high moisture levels. Useful tips may help to choose the right material and avoid many mistakes.

Different types of shower drains and drains for shower

For a better understanding of the principles necessary to examine in detail the type design.

Further noting the important features:

• The lattice is made from solid stainless steel. It is not subject to corrosion, able to withstand heavy loads.
• Rubber seal is created in relief. The rings can be cut. This process allows you to set in increments of 4-5 mm required height of the neck.
• Plastic lid covering the input hole that during construction there will not hit sand and cement mix, and other difficult to remove dirt.
• The presence of a ball joint with a hermetic seal at the output node helps set the butt with sewage is very accurate.
• Said pipe diameter and the other nodes products provide good performance (0.8-1 l / s). When fully open cranes the water will go into the drain without delay.

The following figures are made notes explaining the operation of the shutter system dry.

Traps 1 and 2 differ in the type of connection to the drainage system, horizontal and vertical. The latter option means better performance. But for this it is necessary to bring the pipe properly. Figure 3 is a "slit" ladder. It is identical to the lower part, but significantly increased the area of ​​collecting liquid.

On a note! When using a long grating is allowed to make the bottom of the slope of the soul in one direction only.

Where to install the ladder shower in the floor under the tile?

Depending on the installation site have to create a floor with a different slant.

installation of ramp

The easiest way to set the trap for the soul in the floor under the tile in the construction of private cottages. In this case, you can consider various options in the design phase. For maximum performance using the vertical outlet to the drain. Apply pitting and crevice as needed system.

It is more difficult to implement the project in an apartment building. To ensure smooth drainage functionality necessary to create a slope of 25 to 35 mm per meter. For bathroom standard area, this means lifting the floor at 10-16 cm and a corresponding reduction in the height of the ceiling.

Below is a ladder installing technology for a shower in the floor under the tile:

Picture	Actions
	At first it is necessary to make a layout. The ladder is installed in the right place, at a height that ensures the fulfillment of conditions of good drainage of the above. It is necessary to add the height of the glass. In this example, it is 12 mm. When choosing a mounting point to take into account the size of ceramic tiles. Best of all, if I can fold them away, so as not to perform trimming. We must remember the joints between individual elements. Endure exact distance (eg, 2.5 mm) to help special mounting hardware, plastic crosses.
	To flow in the direction of the ramp from the furthest point of the shower floor will need 14 mm. Note the corresponding value. In the example, a value 21 is 5 cm. This - the total thickness of the layers that are sequentially mounted over floor slab between floors.
	Making this period a monolithic impractical. There is enough space for the installation of additional insulation. If possible, you can set here water or electric heating.
	In this example, we used not a difficult decision. The lower layer is formed of expanded clay (11-12.5 cm). He turns durable and inexpensive. Before pouring damper mounted on the perimeter of the tape and the concrete foundation is laid foam (thickness of 4 to 5 mm). Formwork made of pruning boards, drywallAnd other available tools. In this case, the load on it will not be excessive.
	After 24 hours, the formwork can be removed. At this stage, you can try on the housing ladder and tile, check the accuracy of the choice of the installation point.
	Further laid polystyrene (4-5 cm). You should buy quality products reliable manufacturer with a density of 35 kg per 1 m. Cu. and higher. Such plates have sufficient strength and low thermal conductivity. With proper installation, even without additional means good sealing is provided. Expanded polystyrene is cut effortlessly normal office knife. Therefore, adjustment of the individual elements form a particular space will be performed accurately.
	In penopolitstirole make the necessary cuts. After - trapiki installed to drain water, drain is connected to the sewage system. The apertures between the construction parts are filled with foam.
	For the next phase of useful special device. This is - a set of rods and ring member with the grooves of the plastic. Each of the guide is designed with a variable height. They are installed with the bevel toward the drain. Screed poured over these levels. This ensures optimum change of height (about 10-11 mm per 1 m. Length floor). It will be enough for rapid movement of fluid, but will not have a feeling of discomfort due to the uneven surface.
	During the final control of the fill level. It should get below the gangway on the total thickness adhesive composition and ceramic tile. Plastic parts of the solution are not removed. They will serve as expansion joints, preventing the destruction of the structure when the temperature changes.
	For laying tiles used, resistant to moisture. Its installation from start to sink and then - to the walls. This technique helps to minimize errors and limitations of a certain size. Cut the tiles near the walls will be less visible than in the central region. Small tiles (mosaic) Is better suited for such projects. With these products easier to create the correct tilt in the right direction. Cut parts at the joints are less noticeable. The gaps between the tiles will be overwritten specialized blends the desired color. The gap between the plastic housing and topcoat drain fill water resistant sealant.

In the last step removing the temporary plastic cover ramp dry gate shower mounted grille. After - check the availability of the system.

Related article:

Skirting bathroom. This article discusses in detail the plinth. Here is information about different materials, their use of technology, especially the selection, design techniques that will help you make the right choice, and increase the interval between mandatory repairs.

For more useful tips and conclusions

Installation of this product - a rather complex construction project. It is combined with the total capital Repair of bathroom. Thus, useful preliminary detailed planning. Get the necessary aesthetic parameters without errors help modeling in 3D. To do this, use special computer programs.

In order not to waste your own time, you can take the help of specialized professionals. Experienced sellers of ceramic tiles offer the services for optimal layout absolutely free. They should be treated with the precise parameters of the premises, and a list of specific requirements.

To equip the soul system "warm floor" You need a project. When using water as the coolant create a separate circuit and it is connected through a distributor to the individual heating boiler. Electric heating can be installed in the apartment building. But I have to take into account the increase in power consumption.

For information about how to do without a shower tray in the apartment - this is only part of the necessary knowledge for an integrated conversion bathroom. Responses to additional questions can be found on the thematic pages of this site.