Soft floor for children's rooms: how to choose correctly

The proper use of modern materials helps create great floor coverings. Any prudent owner will enjoy a beautiful appearance, ease of care, durability, no extra costs for the purchase and operation at all stages. When choosing for the soft floor children's roomsExhibit special attention. In this room, you need to create an ideal environment for the child.

Main characteristics

Before searching for the best material flooring a child's room should be accurately formulate the main requirements:

• In this room, you need to create a healthy environment. This means that you should exclude materials that emit into the atmosphere of harmful substances, allergens. Handy easy to clean, to maintain impeccable hygienic conditions are not accompanied by undue hardship.
• increased physical activity young children increases the injuries, so the soft coating should be given preference.
• Are essential aesthetic characteristics, to create suitable conditions for the harmonious development.
• If you provide a good resistance to wear and tear, the coating will retain their consumer options in good condition the entire period of use without the need for replacement.

On the basis of the above factors can be considered in detail the characteristics of a typical soft floor for children's rooms:

• It is created by using a combination of two copolymers (vinyl acetate-ethylene). Such material is not completely safe structure able to degrade the air in the room. He does not emit odors.
• When the procedure of Shore hardness from 30 to 50 units provide sufficient softness to prevent injury.
• Density in various modifications material was 0.93 grams per 1 cm. cu. This means that the material is difficult to damage by mechanical means. It is not recommended to walk in shoes with "stiletto". But take a bite of tile kid can not.
• This coating does not slip, so the child will be easier to maintain balance during outdoor games.

• The porosity of the material provides a low thermal conductivity from 0.36 W / (K * m) and better. Such a coating provides an additional layer of insulation.
• Its integrity is maintained over a wide temperature range (from -80 ° C to + 85 ° C).
• It does not absorb water. He was not able to break down oils, solvents, household cleaners.

Note! According to the chemical compound ( "EVA"), such material is sometimes referred to as EVA resin, or EVA plastic.

The soft floor for children's rooms is different from other coatings

For comparison, it is necessary to explore alternatives, taking into account the actual operating conditions. Weight of 1 sq. M. EVA layer is from 1.1 to 2.4 kg. This material is not difficult to move. It is much easier to install and easier than ceramic tiles. If any damage, the replacement of corrupt segment will not cause difficulties.

ceramic, wood and concrete cover is too hard for a child's room. Physical activity of the child are not limited, so you have to lay on the floor carpet. These additional soft ware is difficult to close a large area, so increases the likelihood of injury.

Fleecy soft floor coverings are not recommended in children's rooms. They absorb dust. They are difficult to clean from pollution. For economy of manufacture of products of this group of synthetic materials used low quality polluting foreign odors.

How to buy without errors soft floor mat puzzle for kids

The following table shows the best offers today's market:

Photo	Manufacturer / Name	price, rub.	Features, comments
	Ekopromtorg / Blue 33 MP	690-850	This price is for a set of nine tiles with dimensions of 330 x 330 mm. In the folded state they can be closed area of ​​about 1 sq. M. The company offers products in other colors, allowing you to take out of them the desired song.
	Ekopromtorg / Marine animals	700-890	Here in colorful tiles mounted insert. Manufacturers produce coatings with different themes, so is not difficult to choose a set that is suitable for Your specific room.
	BABYPUZZ / Solid tiles	720-840	With a thickness of 10 mm using such materials can be an effective layer preventing the penetration of cold and propagation of sound.
	Wonder Toys / Mini-Zoo	780-850	Dimensions tiles are 150 x 150 x 10 mm. In the folded state is formed soft mat 600 x 900 mm. Individual elements can be mounted vertically and insert back into the grooves during the games.
	EcoCover / «Classic»	960-1100	This set of 11 tiles are used for the classic game in "Classic". When the connection is closed area of ​​about 1, 5 sq. M. If desired, removing the upper member from the remaining parts can be assembled rectangle. The standard kit includes a carrying bag.
	Wonder Toys / «figures and numbers"	1500-1800	Of these tiles, you can create three-dimensional figures. They established figures and other elements, which are used for training account development of other useful skills.
	Wonder Toys / «Road signs"	1400-1750	The kit for studying traffic signs comprises 9 bars with dimensions 330 x 330 x 10 mm.
	Wondek Toys / »Streets and shops"	1450-1740	Another set of 9 tiles to explore the surrounding world.
	EcoCover / «Circle»	1300-1400	In this set - 21 tiles. From it you can create only a round pad so the docking with the standard square elements will not work.
	EcoCover / «Ocean»	1100-1400	In the folded state of puzzles make a square with sides 600 x 600 mm.
	Wonder Toys	120	Price listed is for one tile 330 x 330 mm. They can create a coating of any size and configuration. Outwardly, it looks like parquet, But it will retain all the advantages of a soft EVA polymer.

Shown in the figure shows only one example of the potential of the surface preparation. To the joints perfectly matched in size and height is necessary to apply the product the same manufacturer with the same specifications.

Note! The images on the surfaces coated with the use of modern printing technology. They do not fade in direct sunlight, do not deteriorate with neat cleaning. But we must take into account their limited resistance to external influences. To remove dirt, do not use abrasive cleaners, learn advance recommendations for care products.

From a brief review of the market it is clear that the cost of underfloor heating children affects not only the size and aesthetic design puzzles, but also the brand. Known brands provide a high level of quality in all product batches. They provide a reliable guarantee. The distribution network represented tiles with sides of 250 to 1000 mm and a thickness of 9 to 14 mm. This range simplifies the selection of components for the successful implementation of various projects.

Related article:

What is the best humidifier for children. What better device to buy for children, where to install it in the nursery, is there any special requirements for the device, which are moisturizers? On this and many other things in the material.

Installation of the flooring in the nursery and operation rules

The preliminary plan will help better define the procedures and options for future action. In this case, specific parameters for the baby's room should be considered. Here he is resting and learningPlays and playing sports. Therefore, it is necessary to make a qualitative zoning. It should take into account individual preferences, age, and general style of decoration.

dry method

If you use this technology, Installation of soft puzzles for the children on the floor will not cause difficulties even with no prior experience. It is used on smooth hard surfaces cleaned of contaminants. Carpet will not work, since it is not necessary rigidity of the support will be provided.

rigid fixation

This algorithm will permanently set the pad (soft floor) for children:

The photo	Description of action
	Antic flooring slab to dismantle level interstorey overlap. Remove shaky, uneven concrete screed. Eliminate cracks and other defects found.
	If necessary, the adjusted layer heater. This figure shows how the mounting is carried out with mineral wool. Mats placed between the ribs crates. top fix chipboard sheets, plywood.
	It is possible to create a layer isolation of polyurethane foam slabs which cover film and pour construction mixture.
	after solidification concrete on damping backing install plywood.
	Tiles are laid on the adhesive composition which is intended for use with polymeric materials. For alignment of joints using a mallet and rolling a rubber roller. Around the walls leave the expansion joint (width from 10 to 15 mm). Its close appropriate in size and color skirting.

Important! Instead of glue, you can use double sided tape. This will facilitate the removal and replacement of defective components.

Care and Repair

when you install room for children soft floor puzzle recommended to provide an opportunity not a complicated disassembly.

Acceptable application sensitive mode to remove contaminants using washing machine. In this case, the set temperature range not higher than + 55 ° C. It is necessary to take into account the additional restrictions that are listed in the official manufacturer's instructions.

To extend the life of the soft covering of EVA should not walk on it in the shoe. Timely grains of sand must be removed, and other mechanical contaminants that can form scratches.

Related article:

Armchairs small size for small rooms. In this article we will discuss the advantages and disadvantages, upholstery and filling, size, variety, average prices, a gallery of the best models and advice on the correct choice.

Additional recommendations, the general conclusion

Buy soft floor for children's rooms is not difficult at a reasonable cost. With a total estimated cost except for small and nice appearance should be considered a long life, possibility of operative repair. If the floor covering is flat, you can perform the installation without disassembly, on its own, in a few hours.