Dimensions wardrobe: how to pick up as you select?

Built-in wardrobe functional piece to any interior. Fill in the apartment of a small size, adorn the luxury room. Appearance is made in any style. Wide range of standard models offer furniture stores. Individual models are made by manufacturers according to customer requirements.

The device is installed on the planarized surface

1. Before calling gager determine the placement of the principle of clothes in the closet.
   

   Keep each type of clothing separately, the whole range was in full view

2. Sort the items into groups, each group defining, shelves relevant dimensions. Determine what kind of things it is more convenient to put on the shelf, which is necessary to regulate in the drawers. Each garment label location.
   

   The correct size of the internal filling wardrobe

3. Outdoor clothing located in the corner of the cabinet near the door, close to the shelves filled with hats, gloves, scarves. Bottom of the enclosure fill the shoes.
4. Calculate the dimensions of the cabinet offices.
   

   In order to properly organize the internal content-cabinet compartment, you should decide what kind of things and objects will be stored there

5. Having defined the layout, make a rough sketch of the drawing. After the design is complete, call gager.

What is the depth of the cabinet should be?

Modeling the product, do not forget about the compliance of standard parameters.

Depth can not be less than sixty-five centimeters. With less Deepening difficult to place things. Volume hangers with no clothes is fifty-two centimeters. Hangers involved clothing occupy sixty-five centimeters. Closing the doors should be free without effort. When calculating the dimensions, consider the thickness of the material used for the production of furniture. Thick wall reduces the volume of the device.

What size can make the cabinet?

Built-in cabinets produce different size. device length varies from 1.2 m. The shorter length is not recommended to establish sliding doors. Making enclosure of less than 1.2 m, it is accompanied by a swing door arrangement.

Within the boundaries created by the hull systems of limited value chipboard sheets themselves. Standard Particleboard sheet has dimensions of 2.7 m to 2.8 m. Some manufacturers offer chipboard sheets having a height greater than 3.0 m.

Depth-in closets in the narrow hallway

Most of the apartments have a small hallway. A small area is impossible not to fill the overall furniture. Minor adaptations minimum area fill depth. The depth of the device for a small hall is not less than 0.35 m. The space savings is due to the particular arrangement of hangers. Hangers are arranged along the length of the filling portion. Such cabinets have less capacity, have several sliding doors. Swing system on a narrow territory are misplaced. Furniture small vestibules equip mirror surface. Mirrors allow visually increase the amount of space to be filled.

Closets with variable depth: Angle and radius

Among the huge selection of systems, special attention should be angular and curved enclosures. Models significantly save area of ​​the apartments. Corner, radius devices fit perfectly into the hall, decorate a bedroom, a living room. Due to the wave-like shape is ideal for children's rooms.

The following types of corner cabinets:

• Rectangular - are in the form of a rectangle, square. It refers to the standard classical furniture. Universal device is not very original.
  

  Large rectangular closet with an example of the internal filling

• Corner - a system designed solely to fill the corner of the apartment. Fill any corner of the room. The rear wall of fully replicate the shape angle. Products can settle hinged and sliding doors. There are options that combine sliding systems and sliding mechanisms.
  

  Corner wardrobe with dimensions and internal filling

• Concave - samples, significantly saving the amount of rooms, halls, corridors. The concave facade to visually simulate the filling zone. A good option to fill the niche areas.
  

  Radius concave corner wardrobe-coupe

• Convex - model having the radius of the circle. Convex cabinets placed in corridors, hallways, lobbies. Device does not require a niche is established in any part of the wall. All branches of the model are easily accessible, convenient for use.
  

  Radius wardrobe three doors

• Undulations - a combination of concave and convex facades. The first copies appeared relatively recently. Characterized by an intricate shape. Making the interior of the novelty, combining the opposite line. Suitable for bedrooms, living rooms, children's rooms.
• With its many advantages, radius systems have several drawbacks. Characterized by a small capacity. Manufacturing requires additional labor costs, material consumption, are significantly more expensive than their square counterparts. Require particularly careful treatment of the recoil system. The basis of the roller mechanism should be qualitative. Not fit into every interior.

Width-compartments Wardrobe cases

In the simulation, built-in wardrobe of great importance is the correct calculation of the size of the door of the facade.

The width of the sliding door structure of two meters should be at least sixty-five centimeters. Violation of said relationships, lead to failure of operation of the caster mechanism.

It is difficult to design the width of the narrow doors devices. It is necessary to remember the main rule, the ratio of height and width of the slide mechanism must be 1/4.

At the wrong ratio mechanism is inconvenient to use, poorly functioning, often break down.

Maximum height wardrobes

Maximum system height is limited by the height mebliruemogo premises. It is undesirable to design a cabinet with a height higher than the magnitude of chipboard panels. Standard chipboard size of 2.78 m is organic. There plate up to 3.2 m in height. The undivided doors facade exceeding set not appropriate three meters. The higher the door leaf, the greater the load on the sliding door mechanism. The device will be difficult to open, the roller mechanism to quickly fail.

The height of the main section of the cabinet can not exceed 2.2 m. If necessary, the model may be provided with separate additional section sliding doors. The hard-top of the shelves can be positioned with the seasonal use things.

Modeling height, consider the free space mebliruemoy area. Furniture that rises to the ceiling, looks good in small rooms with a ceiling height less than 2.8 m. flat ceilings more than 3.0 m. ceiling cabinet looks excessively cumbersome visually reduces fillable area.

Furniture system constructed of different materials, is less bulky and has a more stylish appearance. For registration can be combined, glass, mirrors, wood, glass, satin, bamboo, use fotomolekulyarnuyu printing. Glass satin, fotomolekulyarnaya seal combined with any material.

By modeling the components of the model, we should remember, if the house is equipped freight elevator, take into account the overall dimensions of the freight elevator and the amount of openings doors. Consider the possibility of delivery of the component parts of the product.

The minimum dimensions of a corner cabinet

Corner walk-in wardrobe, the best solution to fill the space of the small regions. The product is well-located in the narrowed area of ​​the apartment and correct the wrong shape of the room.

odd-shaped furniture is difficult to acquire in the trade network in the form of finished products. Custom rack made on order from the manufacturers of furniture and master their own hands.

In the simulation, we pay attention to compliance with the standards of depth and width. The desire to save square meters sometimes leads to the presence of the cabinet in a room with limited functionality.

shelf depth may not be less than twenty-five centimeters. Such shelves are not very comfortable, but it is quite functional. Shelves of lesser magnitude are not practical to accommodate the standard things.

shelf depth should not exceed one meter, the shelf is longer than one meter is not always convenient to operate. Hard to reach to the right things. Distant compartments can be filled veschyami not everyday use.

Width should not be less than one meter. Sliding facade with a width should be between forty-five centimeters. less than the value will make the door structure is not convenient to use.

The height of the corner model does not have strict restrictions. It must be remembered that the model-to-ceiling height of more than three meters ironed too massive. Move the door high cabinet hard, difficult, uncomfortable. Cumbersome design can spoil an interior room as a whole.

Video: How to calculate the cabinet. Quick and easy