Basket with cones steps: 50 photo how to make their own hands

Crafts from various "gifts of nature" - the popular idea of ​​the decor, which does not require large financial costs. Especially the "rich" in the gifts of the forest and field in autumn, even though almost all of the collected used immediately, but require pre-drying. How to make a basket from cones with their hands, tell the detailed master classes. The product is perfectly decorate group in the kindergarten classroom, the interior of apartments, houses, office space.

Content

  • How to prepare bumps
  • The materials for the basket assembly using glue tools
    • Assembling the bottom of the basket
    • handle assembly
  • Master class for assembling a wire basket on the basis of
  • Manufacturing basket-planter
  • Square basket-box
  • decorative design
  • conclusion

How to prepare bumps

Number of cones depends on the dimensions. You must collect only the whole, clean, not damaged by pests. It is advisable not to use "fresh", just raised bumps, and those who are already a couple of months had lain in a dry place, well dried out, opened. Fresh pine fruits are sorted by size, dried in the shade under a canopy, spreading on the paper, so that they do not touch each other.

The assembled structure of these parts is not deformed during use. It is desirable to use not damaged by pests elements of identical shape, form - combining spruce pine problematic, and bumps alder are suitable except for the exterior decoration of the finished subject.

A variety of cones
How to prepare bumpspreparation conestwo conescones in a basketmany cones

It is interesting to look basket, where a side (top row) is made of the most important parts, and other series and a pen - from smaller ones.

The materials for the basket assembly using glue tools

A small basket is easily created about four tens pine cones and glue type "point", any other similar. Also need a strong fishing line to create pens products, clippers or strong scissors, beads, ribbons, sequins to decorate the finished design, a bit of free time to production, dry basket. Making the subject is better to start from the base and carry handle at the end.

Work with cones
set sparklesThe base of the basketdecorative ribbonsBeads in a BoxScissors for needlework

If it would be desirable to make the maximum light from the basket, but not stained pine fruits, soaked them in water with the bleach, for 8-10 hours, after which it was dried in an oven.

Assembling the bottom of the basket

Basis baskets assembled from nine knobs of the same size. It is advisable to take large, homogeneous, putting them "bottomed" out - so design will interesting. When the circle is complete, it is attached to a number, but the bottom is drawn in, and the details have already taken eight. In the next series of the same, parts need only seven, is the bedplate is made of one of the largest bumps, tapped the bottom to the "floor." Now proceed to the implementation of the handle.

See also:Decor Christmas balls with his hands - a selection of ideas

To create a beautiful basket in the form of half a sphere uses a large foam ball to the middle of "wrapped" with foil. The adhesive is applied directly to the last, bumps are mounted as close as possible to each other. When the product is dry, the balloon is removed and a basket, a vase filled with flowers, moss, other decor.

Assembling the bottom of the basket
Assembling the base of the conesBonding conesWork with conesbase assemblythe basket assembly

handle assembly

To make the handle, it takes a bit of wire or fishing line of medium thickness. For this part you need nine cones, glued together, and all except the uppermost, central, upwardly rotated bottomed. For the strength of the handle knobs not only need to stick together, but also to wind fishing line, but so that it was not too noticeable. Detail primatyvayut and bonded to the main part of the basket. Bumpers, outer portion decorate beads, strips, pastes, dry colors, varnish Glitter.

Cones in a Box
ornament conesassembly optionornamentationThe assembly conesornament cones

Master class for assembling a wire basket on the basis of

Larger structures are carried out nearly two hundred cones for strength fastened to each other by wire. Here, all the elements are placed outside the bottom - so the design looks more aesthetic, more accurately, and due to the fact that the adhesive is absent here, goes completely environmentally friendly. To attach the knobs to one another, it bend around a wire loop, a "chain" of several items in the closed ring.

What should be done step by step:

  • of about 30 elements going circle, the details of which are bonded to each wire, glue is not normally used;
  • further performed three or four such rings, wherein the lowermost performed the smallest, as a basket should extend upwardly;
  • bedplate here comes relatively close, because to create it are attached to the central parts of large bumps, they all face the bottom of the "to the ground";
  • 7-11 is composed of a bottom knobs, wire is fastened to the remaining part. Sometimes it is made of cardboard, but it's not so beautiful;
  • Now is the handle. Its "twisted", and two or three rows of small cones or operate from a rod firmly attached to the base;
  • after a product liked decorate any way.

See also:Decor wedding champagne bottles with his own hands 50 photo

The base of the cone
Bump on the wireFirst rowCones on a wireFirst rowThe base of the basket

Manufacturing basket-planter

Planters - decorative design, which fits inside the pot with living, preferably curly and ample plants. To begin, select a plastic or ceramic pot, which will later be placed in the basket. Cones bonded together or bonded directly to vazonchik itself. The handle of the basket is performed is higher than in the simple decoration, not to impede the flower to grow in height. Do from the bottom of natural materials does not necessarily - just the side walls. The edges of the structure are performed on one or two cm. higher than the pot.

When it comes to the suspended product, make it a little differently: the bottom is performed necessarily all elements are firmly held together by wire, selected to match the subject. Discreet wire frame of two loops clings to the very flower pots, hook-hanger, carefully hidden under the handle design. If cones decided to issue a tub or barrel, standing in the open air, without special impregnation prevents rotting, eating beetles, destruction under the influence of rain, can not do. Generally used various formulations suitable for wood, lumber different.

the basket assembly
The application of plant potsPlanters of pine conesReady product assembly plant potsPots of cones

Square basket-box

To create such a functional object will require a small box made of thin plywood, hot melt glue, staple gun, wooden handle. Capsule placed on a flat surface, wrapping from the bottom upwards, while items placed arbitrarily, it is possible to combine elements of any shape, color and size. Upper "shishechny" series should slightly obscure the edge of the box, and the inside of her toned color cones. Thin handle, wickerwork or carved from wood, fastened by a stapler, paste over the seeds of vegetables, herbs, sprinkled with sequins. Such a product is suitable for storing small items needlework, various kitchen stuff, haberdashery.

Square basket made of cones
Cones in a basketReady version of the productmany conesBonding conespine cones

decorative design

Decorate the finished basket allowed anything - it all depends on the imagination of the master, the size of the structure itself. Some versions come with original so that additional decoration is not required. It is difficult, in terms of self-production, the basket in the form of chickens and turkeys, the coach of Princess and the rook, the amphora on the leg and a certain similarity of the box with a lid.

See also:Roses from corrugated paper

Basket with pine cones

Best fit:

  • live, dried plants, moss;
  • textile, paper flowers, including those made of gofrobumagi;
  • plastic, wood, glass beads;
  • various width ribbons, caramel;
  • paint in the can with sequins;
  • spray paint or Jar;
  • branches and berries of mountain ash, hawthorn;
  • lupine beans, pumpkin, sunflower, coriander;
  • patchwork crafts;
  • toy fungi of fabric or plastic;
  • textile inserts;
  • animals from pine and spruce cones;
  • multicolored sisal;
  • buttons.
Making baskets
decoration basketBasket with applesReady baskettwo basketsReady basket

Some fans make out the large outdoor LED basket. It cling to the handle, let along a side or placed in the center. Product itself is not always handle is rounded, allowed configuration in the form of heart, cone, as well as U-shaped. From the "bottom" of inverted cones up to create original colors for filling baskets - the lower part of the paint the bright acrylic paint, contrasting color scheme is drawn core. "Flowers" is placed on a bed of sisal, moss.

Variously decorated baskets are suitable for very different interior spaces. For high-tech product is completely painted silver-gray paint, ethnically decorated with ornamental grasses, for boho - multiple threads of multicolored beads.

conclusion

Done by hand basket, other similar hack is a snap if the natural material to prepare properly. These items are suitable for the autumn children's parties in elementary school, kindergarten. Most "shishechnaya" basket without even having any decor, will be a great decoration for a country-style interior, rustic, loft, Scandinavian and many others.