How to clean the washing machine from scale: cleaning with citric acid

Modern man is hard to imagine life without the washing machine. Daily hand washing is not only hard work, but also can seriously undermine health. Not to mention how to affect the skin cleaning agents and water. But what if your favorite "helper" itself in need of care, and the drum of the washing machine starts a bad smellAnd how to deal with this problem - not always immediately clear.

Among other things, there is another invisible enemy - scale, from which also need to get rid of time to machines last longer.

Can clean washing machinecitric acid descaling. This is one of the most secure, easy and eco-friendly cleaning methods. Buy acid powder can be in almost any store. In addition, it costs a penny, so the cleaning of the washing machine with citric acid - also a very a budget option.

the need for cleaning

Inside each machine is, heating element. It suffers from various impurities and substances dissolved in water, which further deposited thereon as a coating. Prolonged ignoring cleaning machine this coating is transformed into a thick layer of scale, which is capable of washing degrade quality or cause damage to equipment.

The amount of plaque on the heating element also affects power consumption: the larger the scale layer, the more energy is required for heating water. To carry out cleaning, it will be noted that electric bills are smaller.

Check availability raid on the heating element can be, even though it presents some difficulties. To verify the required small but powerful flashlight and a little perseverance.

You need to shine in the lower holes that are in the drum, as the heating element is typically located directly below it. If you can not see anything, you can try to shake the drum at different speeds, which will help to see and understand the element, whether there is a scum. If it was not possible to see not only the plaque, but also the heating element is calculated scale presence theoretically possible.

Such a coating is formed when the water heated above 60 degrees Celsius, and when using boiling. Depending on the frequency of use of those modes and increases or decreases the need for cleaning.

On the plaque formation is also influenced by:

• The quality and properties of detergent. Limescale is formed using fewer resources, water softener.
• Number of fluffy thingsPassing through the spin cycle. Rip villi fall on the heating element that accelerates the formation of plaque formations.

What to do first

Run cleaning laundry can only be completely devastated by the drum, it is therefore necessary to carefully examine for things got lost.

If nothing is revealedIt is required to hold a "clean up cleaning." To do this, take a clean damp cloth and carefully wipe the cavity under the rubber lining, completely remove contaminants present there.

There are legitimate safety rules when cleaning the machine-machine from scale:

1. You should not sleep more acid in the hope of better treatment. In this case, there is a risk not only to clean the machine, but also contribute to the erosion of acid unit parts from plastic and rubber.
2. Purification was not recommended for high temperature water, as it increases the rate of chemical reactions. Result - again corrosive acid machine parts.
3. If the scale very much, during the cleaning can be heard the characteristic noise, as if something was knocking inside the device. You need to stop the washing machine and free draining, pulling pieces of fallen off the scale.

The amount of powder

In this case "More" - does not mean "better"So pour a lot of powder do not: an excessive amount of citric acid can seriously harm the washing machine, and thereby significantly reduce battery life. Cleaning the washing machine with citric acid - a serious hobby, so random powder is better not fall asleep.

Calculating the number of required powder is made taking into account the volume of the washing machine. Technics, calculated on 3 or 4 kg of laundry load, will require about 60 grams acid. When the amount is 5 kg can safely fill 150 grams powder.

The acid is usually sold in bags with packing at 15 or 20 grams, so that a single machine may require purification from 3 to 10 bags, Depending on the volume purchased.

Step-by-step instruction

Instruction is simple enough, but it has some very important tips. How to clean the washing machine citric acid descaling:

1. Carefully check the drum and clean the cavity in the lining.
2. The container for the powder to fill the required amount of citric acid. If desired, the powder can be filled into the drum, but the first option would purge all parts of the device.
3. The washing program must be at a temperature above 60 degrees Celsius. If the machine has not been cleaned for a long time, it is necessary to select the program with the highest temperature of the water. Keep in mind that the program must be complete, including rinse and spin.
4. Turn the washing machine.
5. After cleaning must again wipe the cavity behind the rubber lining to remove any pieces of scale or dirt.
6. At the end of the machine is left open to the full drum drying.

Prevent trouble is always easier than to remove it. Suffice it to prevent use citric acid to the washing machine, so as not to have problems with the laundry. Brushing machine with citric acid is recommended semiannually.

retain