How to clean the filter in washing machines Indesit and Samsung brands: instruction

Modern automatic washing machines are equipped with elements such as filters. They were in the car, usually two. They protect equipment from various kinds of pollution and damage, ensure proper operation, ensuring long operation. To prevent the trouble that may arise through the fault of the contaminated items such manufacturers recommend to clean them twice a year.

If you reduce the quality of the washing machine, it can be a signal to the fact that the filters must be cleaned. Alone is not recommended to clean the machine element, most equipment manufacturers. In this case, nothing complicated in this process is not, especially if you understand how it happens. Quite possible to do without the help of professionals and save money the family budget.

Cleaning the drain filter

Drain filter cleans waste water from large debris. This is to ensure that dirt does not hit the pipes and the pump and, as a consequence, does not damage the components. It is also often called the pump filter, garbage or drainage.

This element is located at the bottom of the narrow instrument panel. This also applies to washing machines with front loading, and with the vertical. The panel is attached to the bottom of the washing machine latches. It lifted it quite easily the use of any flat tool (e.g., screwdriver, scissors). If you remove the bottom panel, then right behind it you can see the cover element. It is usually on the right side and is provided with a handle for ease of use.

Before removing the filter cover, you need to prepare - to take a dry soft cloth, that absorbs water, and to impose their car, and shove the cloth under the bottom of the device. This is due to the fact that in the machine even after draining Water is a quantity which can reach half of the bucket. Cloth will absorb the liquid, reducing the time of cleaning and protection, such as furniture, if it is integrated appliances.

Next, turn the cap counter-clockwise to make two turns and pull it toward you. Cover with a filter in the hands. It remains only to clean it.

To clean this item, you must perform the following manipulations:

1. Wash it under running water.
2. Brush the contaminated portions of the element (suitable old toothbrush).
3. If it is covered with coating of lime and / or there is an unpleasant smell from it, then it can be soaked for several hours in a solution of citric acid and water.
4. Clean the seat in the very machine. Perhaps there stuck debris. To facilitate the procedure, you can use a flashlight.

During the procedure for cleaning the drain filter can be a problem. There can be a situation that cell cap just do not be turned. This might happen if he did after buying a washing machine not be cleaned, it will never reach them, and it just stuck with.

In this case, in order to remove the element from, for example, a washing machine Indesit, you need to remove the pump, putting the car on its side. The devices of this brand very easy to get to the pump. If the model does not cover, then at the bottom it will be clear the pump. If the lid is, it would first have to remove it, and under it already see the pump.

This is followed by a pump disconnect fittings and chips with wires. It is also necessary to unscrew the front bolts which hold the item, then it is necessary electric unpin the pump portion and filter to spray WD-40 liquid. Further, it is already possible to open and clean the element.

After cleansing filter is necessary to carry out all manipulations in the reverse order. Be sure to check whether the tightly screwed filter cover! Otherwise the water during washing machine operation will leak onto the floor.

It should listen to the opinions of experts, and not wait until the filter is clogged with dirt. Clean it is necessary to once every six months. T if the washing machine Indesit last a long time. Proper care technology will improve the quality of its work and increase service life.

How to clean the filling filter

Besides drain filter in machines producers set jellied filter representing a fishnet, where dirt accumulates. But it can not meet in all models. Its function - cleaning the water of dirt and various impurities.

This element is located near the water supply valve, and it is joined by the water inlet hose. To clean it in machines Indesit, you first need to cut off the water. Next, unscrew the water inlet hose and a pair of pliers to remove it from the valve. Toothbrush ideal for cleaning. After cleansing, it is necessary to perform all the steps in reverse order.

The water quality is directly dependent on the work of the filter. The worse and harder the water, the more often it needs to be cleaned. You can use a special filter to protect the washing machines that will save this item and ensure smooth operation of the machine.

Samsung washing machine service

The fact that it is time to clean the filter in the machine Samsung, you can guess from bad water coming into the tank. Also on display you may receive an error 4E and 5E. To flush its elements can not use metal brushes, abrasives.

To clean the filter in the instrument Samsung, you must:

1. Shut off the water.
2. Detached from the hose pipe (rear of the machine).
3. Remove the element by using pliers.
4. Rinse it from all sides under running water.
5. Clean pipe inside and outside.
6. Conversely purified set element.
7. Attach the hose.

Cleaning procedure should be carried out six times a year and each time the display shows the error 5E.