How to clean a vanish carpet

The carpet is the most contaminated object in the house, there are traces not only of dust, but also of household stains. Therefore, every mistress and puzzled by the question: how to get rid of dirt on the carpet? With the help of modern household chemicals, you can remove the most difficult to trace, and in this article we will look at how to clean the carpet at home Vanish.

to the contents ↑

What is Vanish?

Vanish is a universal cleaning agent for removing stains of any origin and practically from all types of coatings, in our case - carpet. It is available in the form of a shampoo or powder.

It can be used on any floor coverings - carpets, with ordinary and even long nap, for light and colored. It is due to this wide range of action combined with great efficiency, this cleaning is so popular.

to the contents ↑

How to wash Vanish carpet?

To get the expected result and not to spend a lot of effort, consider the following recommendations in the cleaning process:

1. It's best to start dust removal from the inside of the carpet so that it does not get stuck in the surface.
2. Collect under the cover all the dirt, vacuum the inside, and after the front, hairy.
3. Remove stains with a cleanser, starting from the edges moving to the middle.
4. Do not rub the dirt to avoid spreading it.
5. Collect the remnants of the product in the course of the pile, so as not to destroy the structure of the coating.
6. Do not over-moisten the carpet with a cleaner, since its base can not completely dry out and begin to rot, exuding unpleasant odors.
7. Thoroughly dry the carpet after wet cleaning: unfold it with the wrong side up until it dries completely.

to the contents ↑

How to clean Vanish carpet?

Before cleaning the carpet at home Wanish, prepare the necessary inventory:

• foam sponge;
• soft or medium hardness brush;
• pure white water-absorbing cloth;
• vacuum cleaner;
• rubber gloves.

Further, to clean the carpet with Vanish cleaning agent, proceed step by step.

Step 1 - Preliminary cleaning of the carpet

Remove dust and large debris from the carpet in a convenient way: vacuum, if possible, beat it out on the street. This will prevent the appearance of unnecessary stains.

Step 2 - Preparation of cleaning agent

1. Dissolve the detergent in warm water in a ratio of 1: 9.
2. Whisk the shampoo until a stiff foam forms.

Important! Since the foam is just a cleaner, whisk it thoroughly, this will determine the purity of the carpet.

Stage 3 - Cleaning Methods

1. Cleaning the carpet with a vacuum cleaner:
   1. Spread the Vanish Oxi Action powder on the carpet.
   2. Incubate for 30 minutes.
2. If you clean the carpet by hand:
   1. Put foam on the sponge or brush, apply to the coating.
   2. Distribute the product evenly over the surface to be cleaned.
   3. Rub the substance in a circular motion.
   4. Leave for 1-2 hours depending on the degree of contamination.

Important! Consider the following recommendations to help you prevent re-contamination of the carpet while cleaning it. Vanish :

• To prevent carpet from shrinking, try not to over-wet it.
• During cleaning do not walk on the surface to be treated, since at this time the product reacts with dirt.
• To remove old stains on the carpet for contamination, apply a little concentrate in a few minutes, without diluting it, this will greatly facilitate the cleaning task.

Step 4 - Interaction of the contaminant

The drying time of the foam depends on the type of material and the hairiness of the coating. Carefully follow the reaction of the action.

Step 5 - Final procedure

1. Vacuum the remnants of the product.
2. To prevent dust from spreading over the carpet, do not apply pressure to the brush.
3. Collect foam or powder in one direction along the pile.
4. Dry the carpet well before using it again.

Important! Do not use a brush for carpets with loop pile, do foam cleaning and remove it manually with a damp cloth. In this case, the nap dries out with difficulty, in the future there is an unpleasant smell and mold.

to the contents ↑

How to clean the carpet with vanish?

If your carpet is made of natural materials - you can not use a washing vacuum cleaner or any other type of wet cleaning.

The universal cleaning Vanish is suitable for cleaning mixed or artificial fibers: it slightly moisturizes, does not penetrate the pile deeply, but the foam itself effectively removes even the oldest dirt.

Important! Use the above described method of cleaning the carpet to remove dirt from the carpet. An obligatory condition for the long existence of the carpet is thorough drying.

to the contents ↑

Useful tips

• To keep the floor covering clean, vacuum it 1-2 times a week.
• When using a chemical reagent, try it on an inconspicuous area of ​​the workpiece.
• Any cleaning agent is most effective if it is used immediately after contamination.
• Please note that Vanish Oxi Action is not suitable for cleaning carpets made from natural fibers.
• Work in a well-ventilated area.
• Thoroughly wash Vanish to avoid allergic reactions.

Now you are surely convinced of the correctness of your choice when buying Vanish to clean the carpet. Use it clearly according to the instructions and you will definitely get a quality result in the shortest possible time. Further - it remains only to enjoy the cleanliness and comfort of your home!