How to clear a frying pan from a deposit

Now on the market a huge selection of frying pans from different materials. Whichever type of cookware you choose, you need to know how to clean a frying pan from carbon deposits. This kind of dishes is constantly in contact with fat, so even the most accurate mistress is faced with its sticking and the formation of a layer of burning. We will tell you how to remove fat from the frying pan from different materials and different complexity.

to the contents ↑

Than to remove a deposit from a frying pan?

Depending on the material of your dishes, you can use such cleaning agents:

• dishwashing detergent;
• cleaning powders for dishes;
• soda - food grade or calcined;
• laundry soap;
• salt;
• vinegar;
• silicate adhesive.

Required:

• sponges with a double side - soft and hard;
• nylon washcloth;
• metal brushes or brushes;
• soft rags, for example, from microfiber.

to the contents ↑

How to clean the ceramic frying pan from the deposit?

This kind of tableware is very convenient to use, so more and more housewives prefer to see it in their kitchen. The food on it does not burn and stores useful substances. It is very important to properly process it before the first use - this will ensure that you do not often have to deal with the problem of permanent adherence of grease on the surface.

To do this, perform the following manipulations:

1. Wash the pan.
2. Dry thoroughly.
3. Place the dishes on the fire.
4. Put in it 5-6 st.l.salt.
5. Warm up for 15 minutes.
6. Now you can safely prepare her food, and she will not burn for a long time.

To clean the ceramic from grease and carbon quickly and easily, follow this step-by-step instruction:

1. Take a deep container.
2. Pour half of water into it.
3. Add 1 bar of laundry soap, grated on a grater.
4. Add 200g of calcified salt to the soap.
5. Mix well.
6. Place the container with the solution on the fire.
7. Place the pan in the water.
8. Boil on low heat for 2-4 hours.
9. Remove the frying pan and place it under running hot water.
10. Wipe it well with a sponge.

Do not forget about the daily care of ceramics after each use. It is as follows:

1. Wait for the frying pan to cool.
2. Place it under running warm water.
3. Apply a detergent to the sponge.
4. Rinse the dishes.

Remember! Strongly unsuitable methods for cleaning ceramics:

• can not be washed under cold water;
• , temperature differences can not be tolerated;Do not use
• with abrasive cleaners.

to the contents ↑

How to clean the frying pan with Teflon coating?

This type of coating has non-stick properties. Even if the food burns, it will not stick to the surface. But all this will correspond to reality, if you carry out daily care properly:

1. Wait until the frying pan cools down.
2. Pour the entire inner surface of the dishes with warm water.
3. Rinse with a soft sponge.

If the non-stick surface of the frying pan has been damaged, then deposits can be formed in the places of damage. To remove it correctly, do this:

1. Remove all leftovers with a wooden spatula.
2. Put it on a low fire.
3. Fill the bottom with salt.
4. Wait for it to turn brown.
5. Remove from heat.
6. Get rid of salt and let cool.
7. Wipe the frying pan with a clean dry rag.

Remember! Teflon frying pans can not be cleaned:

• should be cleaned with aggressive abrasive cleaners;
• should be cleaned with metal hard wool.

to the contents ↑

How to clean carbon from a cast-iron frying pan?

Nagar from cast iron needs to be removed when it is still hot. When the food cools - it dries to the surface. In order to clean the carbon from the cast-iron frying pan, do this:

1. Pour 2 pcs.l.salt.
2. Pour them with vinegar so that it covers the entire area of ​​the dishes.
3. Place the frying pan on the fire.
4. After boiling, add 100 g of soda.
5. Put the fire on a minimum.
6. Wait for the solution to boil.
7. Rinse under warm water.

If the deposit on cast iron is long-lasting and multi-layered, this method is suitable:

1. Place the pan on medium heat.
2. Fill half the dishes with soda.
3. Warm up for 30 minutes.
4. Remove soda.
5. Rinse under cold water with a hard brush.

Another good way to remove carbon from a cast-iron frying pan:

1. Take a deep 10l pan.
2. Pour 8 liters of water.
3. Add 100 g of soda and 80 g of silicate glue.
4. Put the frying pan in the solution.
5. Boil for 40 minutes.
6. Remove from heat and allow to cool.
7. Treat with a hard brush.
8. Rinse the dishes in running water.

Note: glue and soda can be replaced with laundry soap, pre-grated.

To prevent the occurrence of carbon deposits, you must observe adequate daily care for cast-iron dishes. It is as follows:

1. Wash the frying pan immediately after cooking.
2. Do not soak in the dishwasher.
3. Wash in hot water with a nylon washcloth.
4. Be sure to wipe dry.
5. If necessary, calcine with sunflower oil.

to the contents ↑

How to clean the aluminum frying pan from the deposit?

Such dishes are considered the most sensitive to any kind of cleaning. She does not like:

• alkali and acid;
• mechanical impact;
• metal brushes and abrasive wads;
• aggressive detergents.

Aluminum griddle tolerates a soft sponge and detergent for daily care. If the deposit is formed, then you should proceed with caution. Use this step-by-step instruction:

1. Take a deep container.
2. Pour half of the water.
3. Add soda, detergent and 0.5 tbsp.vinegar.
4. Place the container with the solution on the fire.
5. Place the frying pan in it.
6. Boil for an hour.
7. Wait until the frying pan cools down in the solution.
8. Remove dirt under running water with a soft sponge.

Note: this procedure should be carried out in a well-ventilated area.

Very well relieves aluminum frying pans from the deposit of a calcination method. This is done as follows:

1. Remove the leftovers from the frying pan with a wooden spatula.
2. Put it in the oven.
3. Leave for 30-60 minutes.
4. Remove any remaining dirt with water and a soft sponge.

to the table of contents ↑

How do I clean a stainless steel frying pan?

You can use the salt heating in the dishes, until all the fat is away from the surface, and you can use activated charcoal. To do this:

1. Grind the required number of tablets.
2. Powder the burnt places so that the mixture completely covers the deposit.
3. Fill with warm water.
4. Leave for 20-30 minutes.
5. Wash sponge with detergent.

to the contents ↑

How to clean any pan from fat?

There is a universal method that can be used on dishes made of any material. To do this:

1. Scrub 0,5 grs of laundry soap onto the bottom of the pan.
2. Fill with boiling water.
3. Put on the fire.
4. Boil for 15-20 minutes.
5. Rinse with running water.

The best way to remove carbon deposits from any frying pan is to wash it in time and not start it. Then your dishes will serve you for a long time and please the eye. If you can not prevent the problem, use our tips to avoid wasting time and energy - return the appeal and practicality of your dishes quickly and easily!