How to clean stitches between tiles in the bathroom

All who follow the hygiene of their homes sooner or later are wondering how to clean the seams between the tiles in the bathroom, and return the attraction to all the tiles. This is not accidental, because it is at the seams are formed most of all bacteria and mold. This entails not only unaesthetic appearance of the surface, but also harms health. Do not bring the appearance of your bathroom to this state, it is better to prevent the appearance of serious contaminants.

to the contents ↑

Than clean the tile in the bathroom and the seams between it?

The tile tolerates severe means of influence, therefore the types of cleaning are very diverse:

• alcohol;
• vinegar or citric acid;
• special means against mold;
• chlorinated substances;
• window cleaner;
• ammonia;
• melamine sponge;
• steam cleaner.

You will also need these tools:

• toothbrush;
• soft, clean sponges;
• clean rags;
• spray gun;
• wipes;
• rubber gloves.

to the contents ↑

How to clean tile seams?

Each product requires a specific treatment for effective cleaning. Read through the detailed description of using each of the above to spend a little time on the entire washing procedure.

Method 1

Very well kills harmful living organisms in tile joints vinegar or alcohol. For efficiency of application follow this step-by-step instruction:

1. Take undiluted substance.
2. Dust the toothbrush into it.
3. Process the seams around the perimeter.

Note: wear gloves and get ready for an unpleasant smell. On mix about these means, their combination can damage the integrity of the seams.

Method 2

Recently, many special chemical compounds have appeared on the market that purify seams and kill the fungus. They require strict adherence to the instructions:

1. Dilute the concentrate, taking into account the manufacturer's requirements.
2. Apply to the seams with a brush or toothbrush.
3. Leave for 20 minutes.
4. Rinse with water.
5. Wipe them with special napkins.

Method 3

Chlorine-containing detergent concentrates are well suited for the prevention and disinfection of joints. To do this, simply work the surface and seams with a diluted solution. To wash off or not - specify in the instruction from the manufacturer as some of them do not require this additional action.

Method 4

Very well, quickly and effectively cleans the seams and the entire tile of the steam cleaner. In this case, proceed as follows:

1. Prepare the device for operation, taking into account the wishes of the manufacturer.
2. Process all seams.
3. Wipe the entire surface dry, removing traces of dirt.

to the contents ↑

How to wash the tile in the bathroom from the lime and rust attack?

With daily care, liquid or gel-like tile cleaners are suitable. Usage rules:

1. Dilute the substance in water.
2. Use a sponge to work the entire tile surface.
3. With a damp cloth, remove the remnants of the product.
4. Wipe dry with a towel or a soft cloth.

Sprays for washing windows copes well with impurities and gives a shine to the surface. For a quality result, use it this way:

1. Spray liquid onto the tile.
2. Leave for 10 minutes.
3. Wipe with a damp sponge.
4. Wipe dry with a cloth.

The easiest and cheapest way to clean the tile in the bathroom is to use a soapy solution during cleaning. It is used as follows:

1. Prepare a soapy solution. Do not use liquid and household soap for this purpose, but only a normal toilet.
2. Blot the sponge in the solution.
3. Wash the walls with tiles from the top down.
4. Wipe dry from the bottom up.

Note: This method is effective for daily use. On strong chronic contamination may not work.

to the contents ↑

What else can I clean the tile in the bathroom?

The use of improvised alternative tools is also effective, if you follow certain rules and consistency.

Option 1

Very good cleans the tile from the plaque of vinegar. Use it like this:

1. Take the spray gun.
2. Pour 7% vinegar into it.
3. Spray on the entire surface of the tile.
4. Leave it for 10 minutes.
5. Wipe the tile with a brush with artificial bristles.
6. Remove vinegar from the scuff residue with a damp cloth.

Note: vinegar can be replaced with a solution of citric acid.

Option 2

Another available natural product is alcohol. It has good cleaning and antiseptic properties. Apply it like this:

1. Take 4L of water.
2. Add 100 ml of pure alcohol.
3. Apply the solution to the sponge.
4. Clean the tile.

Option 3

Ammonium alcohol also cleans plaque, but it also returns the lost shine to the tile. Use this step-by-step instruction:

1. Take 2 liters of water.
2. Add 1 tbsp.ammonia.
3. Fill the solution with a spray gun.
4. Spray the mortar onto the tiled walls.
5. Leave for 10 minutes.
6. Wipe with a large damp sponge.
7. Wipe dry with household cleaning cloths.

Note: the tool removes repair marks well.

Option 4

There is another way to remove any contamination from the surface of the tile - a melanin sponge. It is applied without additional funds in this way:

1. Dip a sponge into plain clean water.
2. Wipe the entire surface of the tile.
3. Wipe dry.

to the table of contents ↑

Useful advices

• Do not rub tile seams with products that contain a high concentration of acids;
• Treat seams after cleaning with hydrogen peroxide;
• Do not use hard metal brushes when processing tiles with a glossy surface;
• In all cases of handling, use rubber gloves;
• Do not use liquid soap to clean the tile - it leaves stains;
• Matte tiles are washed with emulsions and covered with wax mastic;
• To preserve the gloss of tiles, do not use plumbing fixtures for cleaning;
• For daily maintenance of tiles, a solution for cleaning glass and mirrors is suitable. Spray it on the walls and wipe with a soft rag. In this case, you will very rarely perform a general cleaning of the tiles.

With our advice to return the tile clean, shiny and attractive surface is quite simple. It is important only to observe the safety measures and follow the instructions.