Destruction of mold

click fraud protection
Contents:
  • What does the fungus look like?
  • What is harmful for mold?
  • How and why does the fungus occur in the house?
  • How to prevent the appearance of fungus?
  • Than to destroy a mold?

Very many people do not think about such an issue as the destruction of mold in his apartment, in particular - in the bathroom. If you look at the walls of a long unrepaired bathroom, you can often notice there is a small or already extensive fungus. This brief overview will help you understand how to destroy mold in the bathroom, if one has settled thoroughly.

to the contents ↑

What does the fungus look like?

Mold can look different, it depends on the surface that is affected:

  1. In the bathroom on the tile, it is usually white, yellowish in color.
  2. If the tree and wallpaper are damaged, the fungus has shades of gray and black.
to the contents ↑

What is harmful for mold?

  • Destroys coatings and their structure. If you do not apply in time for the destruction of mold and fungus, then a small cosmetic repair will outgrow the capital.
  • Causes respiratory and mucosal diseases. Take this point seriously, because mold often contributes to tuberculosis. That's why the prisoners in Soviet prisons were sick for them - there was a lot of mold.
  • Distributes an unpleasant musty odor.
to the contents ↑

How and why does the fungus occur in the house?

There are several reasons for the formation of this muck, but the main one remains - high humidity, a lot of water, condensation.

The problem of old houses

The bathrooms that have not been repaired for a long time, or those where the repair was still under Stalin, have mold. All without exception, no matter how you clean it. The old pipes accumulate condensate, the plumbing is leaking and from this constant humidity, a trickle of water constantly flows from the drain tank. All these are ideal conditions for the life and prosperity of the fungus on your walls.

The problem of new houses

But, strangely enough, in the newly renovated apartments, too, mold can occur. The cause of the occurrence is different, but again - the causing humidity. These are plastic windows. They do not let air into the house at all and the water that is in the apartment, including our breath, does not go anywhere. Add to this the heat and ready - the fungus began to take clear forms, and you were puzzled by the search for a remedy to destroy the mold.

By the way about the new repair. The fungus can also appear when the repair is performed poorly:

  • supplied materials that save moisture;
  • made the wrong seams waterproofing.

And if you are also a fan of fish or houseplants and in your home all this is, the fungus will come to you necessarily. And then what you considered unreal, will be the most urgent for you, namely - the thought, than to destroy the mold.

Important! All these factors work in favor of mold mainly when the room is not ventilated. Mold does not like dry and fresh air, her element is stagnant.

to the contents ↑

How to prevent the appearance of fungus?

As with any other problem, it would be better to avoid it, thinking ahead in advance about preventive measures. What can you do to not have to destroy the mold?- Actions are simple:

  • Install ventilation in the bathroom.
  • Replace poor-quality plumbing.
  • Ventilate your apartment regularly.
  • Do not keep stuffed in the bathroom for a long time.
  • After bathing, ventilate the bathroom.
  • Do a wet cleaning in the apartment quickly.
  • In winter, place heaters that promote air drying.
  • Make the correct sealing of the windows so that the windows do not get fogged up in the winter.
to the contents ↑

Than to destroy mold?

First of all I want to say for those who do not want to mess around and spend this valuable time on it, and who is easier to entrust this matter to professionals. It is enough to find a good service in matters of everyday life, to call and order a brigade at home. To you will come specially trained people who will quickly cope with this problem.

Than to destroy a mold by own strength?

We remove the mold in the wooden house

For the cleaning of wooden surfaces, use building antiseptics for wooden surfaces. But do not use them in pure form. Dissolve turpentine or white spirit, apply the solution to the previously dried surface and repeat the procedure after a while.

To remove the fungus from the walls you will have to remove the wallpaper:

  1. Reduce the humidity in the room.
  2. Remove the wallpaper.
  3. Dry the plaster and remove the loose metal brush.
  4. Treat the wall with an antiseptic.
  5. Apply primer and plaster.
  6. Dry and then apply the primer again.
  7. Dry and seal the wall with wallpaper.

Destroying the mold and fungus in the bathroom

First you need to dry the bathroom, then identify the weak spots - what flows or stores moisture. After you find them - replace them with new ones. Do not spare money, let you spend now what you did not plan, but then you will have a fragrant, dry and beautiful bathroom.

Important! Be sure to install ventilation or check the existing one - you may be able to repair it or simply clean the ventilation ducts.

Now the nastiest, but necessary: ​​

  1. Affected walls need to be completely dismantled: remove the tile, plaster, remove the paint.
  2. It is advisable that during the repair, there is a fan or a heat heater in the bathroom.
  3. After you have peeled all the covers from the affected areas, they need to be dried thoroughly, treated with a clean antiseptic, left for a while and then covered again with tiles or whatever you want.

Let what you have read here will help you keep your apartment dry and comfortable, and the thought - how to destroy mold, you will never arise.