14 best impact drills in customer reviews

Modern drill drills in many respects surpass the standard analogues. With the help of operators they are able not only to drill wood and metal, but also to hollow hard material, to screw screws, to mix concrete. Why buy an ordinary drill, screwdriver, puncher and mixer, if in most cases you can do only one universal unit and do not overpay several times. But the replacement will be effective and full only if the instrument is high-end - at least one of the top 14, below.

Which drill to choose which company to choose

It is difficult to buy high-quality power tools in the modern market, but not because itno. On the contrary, there are many good goods and choosing the best among them is not so simple.

Below are the manufacturers whose percussion drills are worthy of attention:

1. Bosch

2. Metabo

3. Makita

4. Interskol

Bosch is a famous German concern that supplies its products to more than 150 countries. It was founded in 1886.It produces both amateur, painted in green, drills, and professional - blue.

Metabo is one of the world leaders in the production of power tools, including impact drills. Its high-quality products are popular in more than 100 countries. The history of the German company began in 1924.

Makita is a well-known manufacturer in the world, supplying its gasoline and power tools to 160 countries. The company was founded in 1915 in Japan. Is the owner of 8 plants located on different continents.

Interskol is the No. 1 instrument manufacturer in Russia. It is part of the ERTA union, it has 6 factories in Russia, China, Spain. The development of models takes place in our own design office.

The best low-power impact drills

N = 500 W

Bosch PSB 50 RE is a compact network model with a speed of up to 3000 rpm, with a frequency of up to 48,000 bpm, with a torque of up to 8 N • m. Make the maximum holes: in the metal - 1 cm;in concrete, 1.3 cm;in the tree - 2,0 cm. It is equipped with an additional handle, a locking button for the power button, and a depth limiter. Reversing mode and speed control are available. The additional handle is made of non-slip material, so that the tool can be held comfortably and comfortably.

Advantages:

• electronic speed control;
• practical carrying case, quick-action chuck;
• small all, quiet running, compact, easy to use;
• ergonomic design, budget value, durability.

Disadvantage:

• with severe dusting, there are problems with adjusting the shock and reverse.

In general, the reviews are positive, although it is noted that when tightening the nuts, there is not enough clamping. If the tool does not reach the professional level, then as a household, it completely satisfies the users.

N = 580 W

InterSchool DU-580 ER is a household appliance with a plastic casing, a side handle and an emphasis for drilling accuracy. In the presence of a reverse mode and electronic adjustment of the rotation speed. He makes 2.8 thousand revolutions per minute and 45000 blows per minute. It makes holes in wood, metal and bricks, respectively, with diameters of 20, 13 and 12 mm. The tool is fixed in the cartridge with a key, for which a special place is provided under the handle.

Advantages:

• convenient location of the second handle, reverse button and "socket" key;
• build quality, lightness, convenience;
• reliability, strength, versatility, reliability;
• ergonomics, long service life, low price.

Disadvantages:

• poor permeability in concrete;
• heating during long-term operation( which is not surprising, since the device is a household appliance).

The machine fully meets the expectations of users, and with a margin. The performance of the tool clearly overlaps the amount spent on it.

N = 600 W

Metabo SBE 600 R + L Impul is a universal impact drill, characterized by 2.8 thousand rpm, 50.0 thousand bpm, 5 N • m. It is able to drill holes Ø 1,2, 2,5, and 1,0 cm, respectively, in concrete, wood and metal. The construction is complemented by: a supporting handle, a hole depth lock, a speed setting wheel, a quick-action mechanism. There is the possibility of reversing and disconnecting worn brushes. At the base of the wire is a seat for the rigging and a key.

Pluses:

• regular plastic case;
• well thought out design, smooth start, comfortable grip;
• reliability, safety, low noise;
• practicality of pulse mode, ease of operation;
• elegant design of the case.

Disadvantage:

• impractical cord, floppy latch on the suitcase.

On the tool users express themselves either well, or very well. Rare complaints are associated with the cord or suitcase.

N = 650 W

DeWALT DWD024S is a network power tool with all the important accessories: depth stop, side handle, electronic speed control. If necessary, works in reverse mode. Drills a tree( Ø25 mm), concrete( Ø16 mm), steel( Ø13 mm), while producing 47600 bpm, 2800 rpm speed and 8.6 N • m force moment. To perform a long work mechanism on the body provides a lock button. Convenient storage and transportation of equipment is provided with a special holder.

Advantages:

• automatic shutdown when brush wear;
• possibility of application in a rack of a drilling machine;
• rubber vibration dampers, quality materials;
• compactness, light weight, soft start;
• nice design, long power cord.

Disadvantage: The

• cartridge does not always fix the drill bit firmly.

As the users mention: the car is good - it copes with its tasks. There are small selective disadvantages, which do not seriously affect the overall positive impression.

N = 690 W

Hitachi DV18V - shock model with a feature in the form of 2 speeds - 1 and 3 thousand rpm. In the rest the car is similar to other analogues: 27300 beats per minute;holes Ø2.5 cm - for sawn timber, Ø1.3 cm - for rolled metal, Ø1.6 cm - for bricks and concrete. There are functions of reverse rotation, speed control, disengagement of brushes during wear. Completing is carried out by the second handle and a depth limiter - the kit includes a plastic case.

Pluses:

• rubberized handle;button for fixing the switch;An emphasis preventing the sliding of the palm;
• strong retention of the tooling in the cartridge;
• smooth speed adjustment;
• light weight, power, reliability, convenience;
• thoughtful ergonomics, adequate cost.

Disadvantages:

• cable - short and hard;
• there is no safety coupling.

Users compare the tool with a workhorse - it drills everything, or almost everything.

The best medium-power impact drills

N = 720 W

Makita HP 2051 F - 2-speed model with the characteristics: 1200 and 2900 rpm;24 and 58 thousand bpm;diameters, drilling of metal, concrete and wood, respectively, 1,3, 2,0 and 4,0 cm. Standard and individual options are available. First: auxiliary handle, deep pin, reverse mode, speed control, interlock switch. To the second belong: spotlight, anti-vibration system and safety clutch. In addition, special attention is paid to safety when working with the tool - insulation has a paired performance.

Advantages:

• standard suitcase, uncoupling coupling, rubberized handles;
• compactness, versatility, power, low noise;
• build quality, ease of use;
• light weight( for whom), durability.

Disadvantage:

• when working with concrete, periodically "slip" drills, and sometimes the cartridge is blocked.

One part of the buyers call the machine normal, the other - excellent. Bad - no one believes. So, you can take - users recommend.

N = 750 W

Bosch PSB 750 RCE is a percussion tool with a quick-action chuck, backup handle, depth gauge and shut-off button. It has the functions of reverse direction of rotation, electronic speed adjustment, fixation of the spindle. A plastic suitcase is provided for carrying. It is able to drill concrete( Ø1.4 cm), steel( Ø1.3 cm), wood( Ø4.0 cm) with a force of 10 N • m at 3000 revolutions and 48,000 beats per minute.

Advantages:

• handles are finished with non-slip material;
• drill not only drills, including with impact, but also twists / unscrews screws;
• universality, small size, ease of use;
• high quality, power, no vibration, easy and simple handling;
• ergonomic design, real price.

Disadvantage:

• the quality of the passage of concrete is not always "at altitude" - depends on the brand of the latter, in addition, with prolonged drilling is heated.

Excellent drill, superior in many respects to most analogues in its price and technical segment. The ratio of "price / quality / efficiency" when comparing - one of the best.

N = 810 W

Interskol DU-13/810 ER is an electrical appliance operating in 2 speed and frequency ranges: 13280 strokes at 830 rpm, respectively, 32 thousand at 2 thousand. Make a hole with a diameter of 13 mm -in metal products, 35 mm - in wood, 16 mm - in concrete. It is equipped with the usual elements: a backup handle, a shut-off switch, a depth limiter, a speed regulator and a reverse mechanism. The cartridge is used less convenient, but more reliable key type.

Pluses:

• built-in ventilation;long network cable - 4 m;
• main handle with soft lining;magnesium alloy body;
• cool cartridge, convenient buttons and size;
• quality, versatility, power, reliability;
• the optimum price.

Disadvantage:

• not everyone can conveniently use the button on the main handle.

The tool, as users note, copes with almost all materials, and on "excellent".Often effectively replaces the punch. Due to the long cord, there is no need for an extension cord.

N = 850 W

ZUBR ZDU-850 ERMK - network model with the following characteristics: frequency of impacts and revolutions - 44800 and 2800 per minute;Ø of drilling in the bar - 2,5 cm, in the channel - 1,3 cm, in the brick - 1,3 cm. Additional accessories: second handle with a secret, 3-jaw key holder, slider for switching modes, ruler-depth gauge. Functions and possibilities belong to: reverse stroke, speed adjustment, fixation of the mechanism in the on position. The device is transported in a standard case.

Pluses:

• rubber-coated auxiliary handle plays the role of a pencil case for tooling;
• body is made of high-strength alloy;
• handle can be installed both on the left side and on the right;
• quality assembly, power, reliability, smooth running;
• modern design, long-term guarantee - 5 years.

Disadvantages:

• not detected.

The above unit is a solid machine that "drills and drills with a bang", moreover, it is safely stored and transported conveniently in a branded suitcase.

N = 900 W

The Metabo SBE 900 Impuls is a 2-speed impact drill with 3100( 1000) and 59,000 rpm revolutions and impacts, with a significant torque of 38 N • m. Works with ceramics, concrete, stone, plastic, wood and metal - makes holes, depending on the density of the material, with a diameter of 13 to 40 mm. Equipped with a safety coupling, a measuring drill pin, an additional handle, a transport case. Possesses the possibility of reverse, electronic adjustment, locking of the start key, the use of bits without the presence of a quick-action chuck.

Advantages:

• possibility of installation on a drilling machine;
• engine self-shutdown with brush wear;
• long 4 meter cable;
• versatility, power, safety;
• build quality and operation, pulse mode;
• classy ergonomics, durability.

Disadvantage: The

• "native" cartridge does not always reach thick drills.

Based on the reviews, only positive impressions of the instrument - a powerful machine that any professional tasks can do.

The best high-performance impact drills

N = 1010 W

SPARKY BUR2 350E is a network device operating at speeds of 2000 and 800 rpm, with a frequency of 36,000 bpm, a torque of 65 N • m - making holes in various construction materials within diameters from16 to 45 mm. Optionally has: a penetration stopper, a duplicating handle, a safety clutch, a speed regulator, a thrust bar, a return mechanism, a key to the cartridge. Used as a shock drill, mixer, structural part of the drilling machine.

Advantages:

• automatic stop when the brush resource is exhausted;
• magnesium body, engine cooling system, double insulation;
• sound manufacturer, good weight balancing, quiet reducer, simple control;
• power, reliability, high performance, longevity.

Disadvantage:

• is an outdated model, although it is popular.

The instrument on the market is far from being the first year, but it is stably demanded, because it is manufactured qualitatively, it is efficiently operated and it is worthwhile.

N = 1200 W

Interskol DU-22/1200 ERP - 2-speed popular model with a D-shaped handle. Drills steel( Ø2.2 cm), brick( Ø2.5 cm) and wood( Ø5.0 cm), kneads construction mixes, works in the rack of the machine at 34 thousand strokes and 2 thousand( 1 thousand) rpm. It has a lateral handle, a depth limiter, a speed regulator, a starting key lock, a protection collar, a reverse mechanism. Drills are fixed in the chuck with a key. Advantages:

• additional handle - long and rubberized;a non-freezing rubber cord;reliable camshaft;
• does not jump out of hands, does not get warm, does not stop;
• power, ease of use, smooth running;
• thoughtful ergonomics, good price.

Disadvantages:

• flimsy reducer and locking screw of the cartridge;
• is sometimes a poor lubricant.

The tool copes with its task perfectly, the power for many jobs is abundant. True, there are minor technical flaws that do not significantly affect the overall high score.

N = 1300 W

Bosch GSB 21-2 RCT - network power tool with a set of tools, functions and capabilities: quick-action chuck, auxiliary handle, speed regulator, safety clutch, thrust bar, and reverse, lock-off key. Structurally combines with a drilling machine. Product specifications: 2 speeds - 900 and 3000 rpm;frequency 51000 beats per minute;force of the moment 43 N • m;Drilling diameters - from 1,6 to 4,0 cm. In case of brush wear, the mechanism is disconnected.

Advantages:

• palm rest, rubber grip, suitcase in the kit;
• maintaining constant speed, availability of different modes, power control;
• good after-sales service;
• convenient design, power, adequate operation of the coupling;
• longevity - the warranty period is 3 years.

Disadvantages:

• not everyone understands the design and, as a consequence, controls;
• a little expensive.

The car is good - it pays for itself completely. The buyers have additional interest, how much it will still bring profit.

N = 1400 W

Makita 8406 C - the most powerful model with a key cartridge, designed to work at 64000 bpm in 2 speed ranges - from 900 to 2000 and from 1800 to 4000 rpm. Make holes in wood( Ø35 mm), concrete( Ø20 mm), metal( Ø13 mm) - when drilling reinforced concrete structures it is allowed to use a diamond bit( Ø15.2 cm).The kit includes: a side handle, a speed regulator, a remote stop, a safety clutch, a constant speed holding mechanism, a portable suitcase. A key is used to work with the cartridge.

Advantages:

• anti-vibration protection;
• brushes when worn off automatically;
• Convenient location of the electronic selector;
• well thought out design, quality assembly;
• high power, strength, smooth start, no overheating;
• long service life.

Disadvantages:

• no reverse;
• short power cord.

A professional tool that goes through all the materials like clockwork. In addition to the absence of a backstop and a short cable, there are no comments or complaints.

Which impact drill to buy

The choice and purchase of a drill is matched with the preliminary solution of a number of tasks. First, you determine the type of instrument you need-amateur or professional. The first one can not work without stopping many hours a day - otherwise the drill will constantly overheat and may fail. Secondly, it is necessary to provide, with what( what) materials to work. In addition, it is recommended to specifically stop, if not on each of the above characteristics, functions and options, then at least on the main: power, the number of turns and the frequency of shocks.

1. If in time you need to drill 10. .. 20 holes under the shelves, cabinets, paintings, the Bosch PSB 50 RE is suitable.

2. For work on a countryside area where it is necessary to work with building materials, it is better to purchase Metabo SBE 900 Impuls.

3. If necessary, in a more serious capacity, the best option is the Makita 8406 C.

If you have the tools, you can always buy, for example, a blue powerful Bosch. But it must be taken into account that a professional tool is always less universal and more narrow-minded. This model is suitable for daily making a large number of holes for a long time.