Error on washing machine Samsung 5d

The manufacturers of state-of-the-art home appliances Samsung brand equipped the central control panel of the display with a button for removing errors. This function allows you to individually detect, and in some cases - on your own, eliminate the problem that has arisen. In this article, let's try to figure out what to do if there was an error on the Samsung 5D washing machine, to find ways to solve the problem.

to the contents ↑

Error "Sud"( Sd, 5D) on the display of the washing machine - code value

In modern models of the brand "Samsung" the process of foam formation is controlled. If there is an increased amount of detergent in the rotating drum or in the container for the detergent, the function of stopping the formation of foam is included. The displayed error code "SUD"( SD, 5D) on the central control panel signals a non-decreasing amount of foam. In this situation, washing household appliances terminates its software process and launches a wait-and-see mode.

Important! In this case, there is no need to take any hasty actions, since the code error only brings information to the attention, and after a while the selected program is restarted and the washing procedure continues.

to the contents ↑

Causes of the SUD / SD error

There are several reasons for the error on the Samsung 5d / SUD / SD washing machine. The most common are:

• Applying the wrong powder. Do not use detergents that are designed for hand washing - they can cause excessive foaming. For machine washing only powder with the designation "automatic machine" is suitable.
• The use of highly concentrated detergents, which is not suitable for Samsung washing machines.
• Too much use of a detergent. For example, program washing of wool products requires much less use of a detergent.

Important! It is necessary to follow the instructions for using detergent, which are described on the package, otherwise - too much can lead to damage to the washing machine. Usually 6 kg of dry laundry is used 2 tablespoons of detergent.

• Application of substandard and counterfeit detergents, which very quickly put the washing machine into disrepair.

Important! If you do not want to spoil the styralka, then it's best to always buy only proven detergents, which are from a well-known manufacturer. It is worth to worry about cheap and incomprehensible brands.

to the contents ↑

Other problems with the 5D

error There are also other problematic issues. The main reasons for this error on the Samsung 5D washing machine can be:

• Filter contamination - also leads to excessive formation of a foamy substance. Cleaning the water outflow cord instantly solves this problem.
• Fault in foam sensor, which should be checked for operability and replaced if necessary.

Important! For household appliances you need a high-quality detergent. Unsatisfactory means for washing and washing it is desirable to replace.

to the contents ↑

What should I do?

Sometimes there is a moment when the washing process does not end, the foamy substance does not disappear, and the code error button is constantly on the control panel. In this case, proceed in this order:

1. Stop the express washing procedure and load the liquid pouring program. It is also possible to release the lock of closing household appliances and remove unwashed laundry.
2. Next - after cleaning the cord for pouring water, run a blank continuous program mode at 60 degrees. This procedure frees the system of pouring water from excess amount of washing detergents.

Important! When repeatedly highlighting the code error on the washing machine Samsung 5D will have to realize the seriousness of this problem and turn to a highly qualified specialist.

to contents ↑

Probable malfunctions requiring repair

Experienced specialists very rarely meet with malfunctions that require repair, when Samsung's Samsung display appears to have errors of 5D, SD or SUD.Such cases do happen, so it's worth to be ready.

The main signs and causes of malfunctions:

• During the washing process, a 5D / SUD / SD error is generated on the Samsung washing machine, with the drum without foam, and the error does not disappear even when the household appliances work without laundry and detergent. This all signals a malfunction of the foam sensor, which simply needs to be replaced.
• The error 5D / SUD / SD is displayed when it is turned on, washed or rinsed, but there is no foam in the drum and the error does not disappear when the re-start is started - it rarely indicates a malfunction of the control unit. In the event of a processor card blown, only the replacement of the unit will help, otherwise - repair can be done.
• When the machine is turned on or during washing, a 5D / SUD / SD error appears on the display. It is necessary to replace the water level sensor( pressure switch), which besides the main function - measuring the amount of water, can also be responsible for foaming.
• When you start washing without powder, household appliances drain the water for a long time, but the process goes well, if you start with the powder, a 5D / SUD / SD error appears. This indicates a clogged sewer, drain pipe or hose, because water can seep, and there is not enough opening for the foam. In this case, you need to clean the clogged place from foreign objects.

Important! If you can not solve the problem yourself, you should ask experienced specialists for help.

to the contents ↑

Errors of the washing machine Samsung

Errors on the washing machine are classified according to the type of the problem and the cause of the problem. Thanks to the automation of the Samsung washing machine, you can independently identify the problem and try to solve it:

• 4E, E1 - indicates an error during water filling. Lack of water, too low a pressure in the water pipe, malfunction of the electronic controller, damage to the valves, breakage of the water level sensor - all this can cause this error.
• 5Е, Е2 - shows that for a certain time the water from the tank did not have time to merge. This error on the washing machine may occur due to a clogging of the drainage path, hose or filter, malfunction of the drain pump or electronic controller, breakage of the water level sensor.
• OE, E3 - indicates that the water level in the tank has reached the level of "overflow" and within 3 minutes the drain pump will automatically start. Causes are breakdowns of the drain motor, water valve, level sensor or electronic controller.
• UE, E4 - is manifested due to imbalance of laundry in the drum during washing. This problem is very easy to solve with the help of the optimal arrangement of things( remove unnecessary or add missing).If this does not help, then the problem lies in the damage to the drum drive or the electronic controller.
• HE1, E5 - demonstrates problems with the process of water heating. The main reason is the failure of the TEN, because because of this the water temperature does not have time to increase by more than 45 ° C in 5 minutes.
• HE2, E6 - indicates problems with the heating element. In this case it is necessary to test the TEN circuit, and if necessary, replace the TEC or control module.
• IE, E7 - this error on the washing machine indicates a breakdown of the water level sensor, at which the signal frequency values ​​go beyond the upper( 30 kHz) or lower( 15 kHz) limit. As a result, the drain pump is automatically started. In this case, you should check the tightness of the tube that connects the sensor and the tank, as well as inspect the water level sensor, and replace it if necessary.
• CE, E8 - shows that there is a discrepancy in the norm of water temperature, namely for a certain time, a significant temperature rise occurred( more than 45 ° C for wool and delicate fabrics and more than 60 ° C for synthetics).As a result, the drain pump is automatically started. The cause may be malfunctions of the temperature sensor, TEN and their circuits.
• LE, E9 - warns that a spill or leakage occurred four times and now an insufficient level to turn on the heater. Most often, this problem occurs due to the depressurization of hoses, tanks or other elements of the washing machine. It is also possible the water leakage sensor breakage and check the connection of the water drain hose to the correctness.
• 3Е, EA - indicates a break in the winding of the engine or the device. This problem occurs if the number of pulses from the gearmotor is less than 2 seconds after the motor is turned on. In this situation, you should replace the engine or the adapter.
• BE, EB - this error occurs on the washing machine if more than 300 signals per second are emitted from the tachometer during the washing process and indicates the closure of the thyristor. To solve the problem, it is necessary to replace the engine, tachometer or control module.
• tE, EC - indicates a short circuit or an open in the thermistor. It is only necessary to replace the thermistor( TEN sensor) with a new one.
• DE, DOOR - warns of the inadequacy of closing the hatch door or full opening. It is necessary to try to close the hatch more tightly. If it does not help - check the operability of the hatch or electronic controller.

From this article, you learned not only what is an error on the Samsung 5D washing machine, but also the decoding of other codes. Hence - any malfunction of your assistant's work can be fixed immediately, without waiting for the arrival of the master.