- Plasma Display - what is it?
- What should I do if I crack the screen?
- Do I need to change the matrix?
- Problems when replacing the
- matrix. Caution for damage
Plasma TVs are gaining popularity every year, and even in the daytime. They have won the hearts of true connoisseurs of good technology and high-quality images. Series, movies and even news on the big screen at times more pleasant, which bribes an increasing number of consumers. However, sometimes there are such unpleasant situations as a breakdown of technology or, for example, because of carelessness, the TV screen is broken. Agree, not every day you come across such a problem, so the decision is not known to everyone. In this article, we will tell you whether it is possible to repair a plasma TV if the screen is broken and how to do it.
to the content ↑Plasma screen - what is it?
First of all, what is a plasma screen and how does it project an image? The matrix is the basis of such a TV and contains a huge number of cells, inside of which is a mixture of xenon and neon. The cell data is covered by phosphors. Also, along the perimeter are special conductors, which contribute to the formation of ultraviolet glow during passage through the gaseous medium. This is what causes the cells to glow and glow with the specified color. As a result, we can observe a holistic image.
Such a complex mechanism lies between two, often glass, planes. But if earlier the thickness was 3 mm, then today, to facilitate and slightly reduce the technique, the manufacturers have made thinner planes, namely 2 mm.
Important! Indeed, as expected, the weight became less, but the sensitivity to mechanical influences and fragility increased at times.
to the contents ↑What if I cracked the screen?
If you still broke the TV, or rather the plasma screen, then the integrity and proper functioning of the matrix is violated. Since the gas mixture leaves through a split or cracks, you can forget about a good image. It is also bad that it is impossible to repair this fault - you will have to change the matrix in any case.
Important! As a rule, the cost of this part of the TV reaches huge amounts, so it is often easier to buy new equipment, rather than trying to repair a broken TV.
In cases where you have a plasma panel that is part of a home theater, and the sound system and other important functions do not depend on the broken panel, it is undesirable to change the matrix, as this is meaningless. In this situation, it is much easier, more profitable and faster to buy a new TV set again.
Important! But if the situation is radically opposite - the TV has many functions and options, then the replacement of the matrix will be much more appropriate.
However, TV, especially plasma, is very expensive. We advise you to consult in advance with the master on the theme: is it possible to fix the LCD TV if the screen is broken and find out the most suitable solution to the problem.
to the contents ↑Is it necessary to change the matrix?
There is no unequivocal answer to this question and will not be. The whole point is that each situation requires an individual solution. We can only tell you about the basic principles and help you make your decision. So, if you broke the TV, the first thing you need to pay attention to is the device company, the cost and amount of damage.
If the TV has been purchased for a long time, then the manufacturer can no longer produce a matrix for your model. In this case, you will either have to buy new equipment, or look for the necessary part in the repair centers.
Important! For example, the well-known Japanese company Panasonic stopped producing plasma, respectively - and the matrix.
Costly TVs with a lot of functionality are worth trying to fix, because you can save more than half.
Also, it's worth emphasizing that sometimes the damage is not so large, so - you can try not to replace it, but to reconfigure the matrix. If, as a result of the impact, the gas does not come out of the matrix, and only incomprehensible vertical and horizontal bands form on the screen, the situation can be corrected. To do this, take the broken TV to a service center.
Important! The huge advantage is that the price of reconfiguration is not so high.
to the contents ↑Problems with replacing the
matrix If you decide to change the matrix, you should stick to several important points:
- This procedure is not carried out at home, and even more so yourself. You need to deliver the broken TV in repair to an experienced master.
- When transporting, it is recommended to keep the plasma panel in an upright position. This will help to avoid an incorrect redistribution of the load to one of the parties. That is, often in order to transport the affected TV, you will not have enough car.
Important! Convenient is that today you can easily call a master at home, which will help diagnose the magnitude of the problem and determine whether it is possible to repair the plasma TV if the screen is broken and whether it is necessary to change the matrix. Also, the firm will help you to deliver your TV yourself to the service center and back, observing all the necessary transportation rules.
to the contents ↑Caution of damage
It can not be argued that prevention is the best defense. Manufacturers have already created many ways to protect. One of them is an acrylic protective screen. Its advantage is that unlike the screens of TVs themselves, they can be subjected to water soaking, scratching or even light bumps.
Important! This type of screen will help protect the original panel from mechanical damage, which is extremely important, as well as from getting dirt, dust, which is considered an enemy of nanotechnology.
So, if you want to protect your plasma TV from damage, and even more so if the cost of technology is high enough, we suggest buying this option.
Important! Very useful and necessary acrylic protective screen in the house with children, because one careless movement can lead to large losses.
We hope that having studied the material in this article, having weighed all the positive and negative aspects of how to solve the problem, you can personally make your choice, change the matrix, reconfigure or purchase new equipment. The answer to the question whether it is possible to repair a plasma TV, if the screen is broken, remains rather ambiguous and requires the advice of an experienced master. Be careful and if you purchase an expensive plasma TV - protect it. In the future, we want to avoid such situations and long-serving equipment.
