How to clean the iron from the mold on the sole at home?

In a hurry or inattention, anyone can set an incorrect temperature on the iron or iron a thing that can not be processed. The result is spoiled clothing with tan marks and fused fibers and a deposit on the iron. If the thing may need to leave or restore it in an original way, then get rid of household appliances, and even expensive, for this reason is not worth it. There are several ways by which you can solve the problem of how to clean the iron from the mold on the sole at home.

Important! If you are puzzled by the question, how to clean the iron at home from the smell of , most likely you have a device with a metal sole. Teflon and ceramic coatings are positioned as non-stick, so the burning on the surface is not formed, and if it appears - it's just an exception to the rules. Therefore, we will consider those methods that are suitable for stainless steel surfaces.

to the contents ↑

Universal method - cleaning pencil

In the household chemistry market, it is easy to find special cleaning pencils from different manufacturers. All of them are made, as a rule, by a similar principle and extremely easy to use.

Important! What kind of manufacturer to give preference - does not have a fundamental difference. Pencils of any brand perfectly clean carbon deposits, so just choose a price that is acceptable to you.

Use a pencil to clean the soleplate of the iron in this way:

1. Plug the appliance into the mains.
2. Set to 1-2 heating mode.
3. Once the sole is warmed up, treat the problem areas with a pencil - it should melt.
4. While the mass is not yet frozen, take a clean rag and wipe off the dressing with the heat or lay out the lining white cloth and iron it several times with a little pressure.
5. Repeat the procedure several times until the surface is completely cleaned.

to the table of contents ↑

Handicrafts - vinegar, citric acid

These 2 products are universal cleaning products - they are used everywhere in everyday life: for bleaching clothes, shoes, cleaning utensils, furniture. Not bad they will cope with the carbon on household ironing equipment. To clean the iron from the solder on the sole at home using one of these tools, proceed as follows:

1. Prepare a medium-concentrated solution: citric acid 1 pinch per 1 tbsp.water, vinegar is mixed with water in a proportion of 1: 1.
2. Heat the iron, but not to the highest temperature.
3. Wet a clean dense cotton cloth or cotton pad with a solution.
4. Wipe gently so as not to burn your fingers, all the problem areas.

Important! Note that if you use vinegar, then when heated, its corrosive specific flavor will intensify. Be careful not to damage the respiratory tract and mucous eyes.

to content ↑

Non-standard approach

Wax is not a cleaning agent, but in this case it is perfect to clean the iron at home from the stash. More convenient in the application will be a conventional candle - paraffin wax or not has no special significance.

This tool is used according to the same algorithm as the special cleaning pencil: warm up the sole, lead it with a candle, remove the molten mass with the carbon until it is frozen with a clean rag.

to content ↑

Wrong way of

Earlier irons were exclusively with a metal surface, the possibility of using vinegar was not known to everyone, and special cleaning pencils have not yet been invented. Therefore, the owners coped with the problem laboriously and not entirely correctly - with the help of a blade: they simply mechanically scraped the deposit.

Doing so is not necessary for the reason that during such an impact on the sole, scratches are formed. They will further influence the ease of sliding, as well as the cleanliness of the surface. But if you still did not know about other methods or did not have the tools at your fingertips and cleaned the blade with a blade, try to correct the situation a little by the following method:

1. Take the finest grit sandpaper.
2. Carefully walk through it on the soleplate of the iron to grind it.
3. Treat the surface with wax - grate well, do not feel sorry for the candles.
4. Heat the appliance and iron the clean lining fabric.

Important! These measures should be enough for a while, to iron you was easy and fast. As the slip decreases, repeat this procedure.

We hope this article was useful for you and our advice helped to solve your problem at the moment when it was necessary. Be careful when working with heating appliances, so you do not have to restore either their parts or your favorite clothes.