How do I clean the Teflon-coated iron from the burnt cloth?

Even with the most careful use of the iron, there are times when it should be cleaned. Of course, many manufacturers claim that this or that model of home appliances of their brand after the purchase does not need additional care. But experience shows the opposite. That's why we collected the most effective advice on how to clean the Teflon-coated iron from burnt cloth.

to the contents ↑

Teflon - what kind of material?

First let's figure out what Teflon itself is. This is a very unique material. It is simultaneously slippery and durable, so Teflon has found its application in the manufacture of many household appliances.

This material easily irones synthetic things even at low temperatures. But he has one drawback - chipped easily. Therefore, clean the iron from burnt cloth with Teflon coating should be very gentle and careful.

Important! Teflon tolerates the impact of any aggressive chemicals, including acids and alkalis. But direct mechanical action by sharp objects is unacceptable, since after the formation of scratches on the coating, its properties, so important for ironing and ironing different fabrics, are reduced.

to content ↑

Causes of contamination

Before you understand how to clean the surface, you need to understand the causes of contamination of irons. The main ones are a few:

1. Dirty water. Because of it, scaling is very active when using steam functions of the iron.
2. Continuous contact of the heated soleplate with synthetic fabrics.
3. It is also possible for ordinary adhesives or resinous substances, which stick to the temperature even more strongly to the Teflon surface.

Important! Frequent interaction of all these factors inevitably entails damage to the surface and a reduction in its sliding properties. To iron with a soiled household appliance, things, especially white and light colored ones - are unsafe. You can irretrievably ruin the product if the dirt from the sole of your home appliance goes over to the material and literally "solder" into it at high temperature.

to the contents ↑

Cleaning Pencil

Perhaps all the landladies have heard of this wonderful tool that will help you clean the iron at home with Teflon coating. But not everyone knows how to use it correctly.

To begin with, you need to say that a cleaning pencil for an iron can be purchased at any hardware store - this is not a problem. And use it as follows:

1. Preheat the iron to the maximum temperature in the upright position.
2. Then it must be disconnected from the network and well rubbed with a pencil.
3. Wait until the iron cools and wipes out the sole with a paper towel or any cotton cloth.

This procedure can be repeated several times until the ideal cleanliness of the sole of your household appliance is obtained. Be careful and do not rush, not to burn your hands, erasing the dirt from the heated surface of the plastic.

Important! When you feel an unpleasant smell, do not panic, this is the normal chemical reaction of melting a pencil.

to the contents ↑

Vinegar or citric acid

If you were wondering how to clean the Teflon-coated iron from burnt cloth, then this advice should help you. The fabric can clog in the holes for steam, and pull them out from there mechanically impossible. But you can change the situation differently:

1. Take one part of the vinegar and dilute it with two parts of clean water.
2. Wet a cotton cloth that is larger than the iron and spread it on the ironing board.
3. Slightly warm up the iron and, having disconnected it from the mains, put it on a rag.
4. After 10-15 minutes wipe with a damp sponge sole and enjoy a clean iron.
   

Also excellent is citric acid:

1. First, prepare a solution of 200 ml of purified water and one teaspoon of citric acid.
2. Pour the received liquid into the water compartment, about half, turn on the steaming mode.
3. It is necessary to alternate several times - 10 seconds of stripping and 15 seconds of break.
4. After - it will only be to wipe the cold sole with a damp sponge.

to the contents ↑

Nail polish remover or hydrogen peroxide

Clean the Teflon-coated iron from burnt cloth with a 3% hydrogen peroxide or nail polish remover without acetone. Soak any cotton pad with any chosen means, and then attach it to the burnt places on a cold iron. The fabric should go off easily. In the end, wipe dry with a damp sponge.

We hope these simple tips will help you understand how to clean the Teflon iron, because everything is extremely simple and effective.