How to paste a protective glass on the phone?

Modern gadgets have long ceased to be a curiosity, and therefore a smartphone can be seen today in the hands of not only successful businessmen, but also ordinary students. The most expensive and vulnerable place of such equipment is a touch screen, so experts recommend installing additional glass on the gadget. It protects its working surface from scratches and chips. In this article we will share with you the recommendations how to glue the protective glass on the phone to maximize its life.

to the contents ↑

Why use a protective screen coating?

Before you attach the protective glass to your phone at home, you need to understand the purpose and basic functions of this part. Like any device, the smartphone's protective screen has a number of advantages and disadvantages.

Important! Externally, this coating is a transparent and flexible glass, which has a fairly high density, and in size completely corresponds to the main display of the gadget.

Device

This glass usually has a thickness of about 0.2-0.3 mm and consists of five main layers:

1. An oleophobic coating that provides comfort and comfort to the user's fingers sliding on the touch screen, as well as the additional resistance of the technique to moisture.
2. Protective layer that protects the screen from chips, scratches and cracks.
3. Anti-glare - responsible for maintaining the brightness of the image and prevents tarnishing the display.
4. The restraining layer, which, when the screen is broken, will keep its fragments and will not allow them to scatter in different directions.
5. Silicone - provides a firm fixing of the additional coating on the surface of the main screen.

Advantages of safety glass

This device is very popular among users due to the following inherent advantages:

1. Increased level of resistance to scratches or other mechanical damage.
2. The ability to soften the impact, which will ensure the integrity of the screen, even with the fall of the smartphone. An additional glass, even in case of damage, will not be scattered around the room.
3. The durability of the protective screen, positively distinguishes it from a film with similar properties.
4. Possibility of gluing in the home without access to specialists offering their services at a relatively high cost.

Disadvantages of the protective screen

The disadvantages of covering the display with special glass are relatively small, but they should also be taken into account before proceeding:

1. Your gadget after applying additional coating will become heavier and more voluminous.
2. This device has a fairly high cost.
3. When installing additional glass, you must act very carefully.

to the contents ↑

What will it take to paste the glass on the phone?

For self-adhesive glazing you will need the following tools:

1. Wiped napkin for the care of modern gadgets.
2. Dry, soft cloth.
3. Special liquid for cleaning screens of a TV or laptop.
4. Dust bag or ordinary office scotch tape.
5. Safety glass.

Important! Even minimal scratches or damage to the surface of the screen can lead to the appearance of bubbles when gluing the protective coating.

to the contents ↑

How to glue the glass on the phone?

One of the most important moments in gluing an additional coating on the smartphone screen is the careful preparation of the workplace.

Important! It is best for this procedure suitable rooms such as kitchen or bathroom, as in these rooms there are usually a few textiles that tend to attract small particles of dust and debris. This moment can complicate the procedure somewhat and create additional inconveniences.

You can stick the protective glass on your smartphone at home by following the following procedure:

1. Wash and dry your hands thoroughly.
2. Place the technique and protective glass on a clean and perfectly smooth surface.
3. Before starting the procedure, carefully remove the old protective film from the display of your gadget.

Important! You can do this by gently pulling the protective cover over its edge, at an angle of about 60 degrees.

1. Alcoholic wipe gently remove dirt from the surface of the screen.

Important! A cleaning agent can be purchased at a specialized store or cooked at home. To do this, it is sufficient to mix alcohol and purified water in a 1: 5 ratio.

1. Wipe the display to a perfect gloss, the remaining dust particles can be removed with an adhesive tape or dust collector.
2. Remove the protective screen from the package, carefully remove the film from it.
3. Install the device in such a way that it fits perfectly with the speakers and the main key.
4. Gently move your finger from top to bottom to fix the surface on the main display of the smartphone.
5. Get rid of the remaining air bubbles by gently wiping the display from the center to the edges using a plastic card or a special spatula.

Important! Avoid unnecessarily strong pressure, as doing so may damage the surface of the phone. In the end result, you should get a perfectly flat display surface.

We hope that our advice and recommendations will help you to glue the protective glass onto the screen of the touchscreen and thus protect the technician from mechanical damage.