Best axes for buyers' reviews

The Russian man has been using the ax for a very long time. Without its application it was impossible to imagine life in a wooden hut. Without the ax it was possible to freeze, as it was used for harvesting firewood for the winter. Later, other varieties of this tool appeared. For example, tourists take a special ax with them - it should be not so much sharp as small and light. And there are ice axes, the purpose of which is clear by their name. Buy is followed by the best of what is on the market. After all, the ax is acquired for many years. It will be very disappointing if the instrument does not like you. Our today's selection will facilitate your choice - it contains only those axes that cause only positive emotions during use.

The ax of which firm to choose

As we mentioned in one of the articles, manualThe tool produces many companies around the world. Similar enterprises are available in every country - from some Uganda to a great Russia. Methods of production are used approximately the same. Tool steel is available everywhere, as well as material for the handle is easy to find. Nevertheless, some companies have become world leaders - their products can be found not only at home, but also in other countries.

The most popular axes in our country are the following:

1. MATRIX

2. Bison

3. FISKARS

4. STAYER

5. FIT

When choosing an ax, do not pay special attention to the country of manufacture. Believe me, high-quality products are produced in Russia, Germany, the United States and many other countries.

The best carpenter axes

IZHSTAL 030904-120

The Izhevsk-based enterprise produces a variety of hand tools that are then sold at a very low price. And if other budget products have a number of shortcomings, the axes IZHSTAL basically just please their customers. That's the model we are considering is a quality product. Here, a wooden handle is used, which practically does not slip in the hands. The instrument turned out to be weighty, which only benefits him.

For the production of the handle, the manufacturer used solid wood species. Fastening of an ax handle has turned out quite reliable. It is recommended to use this tool for splitting, cutting and processing of wood. In particular, the ax has proved itself well in carpentry and firewood cutting.

Advantages:

• Reliable wooden handle;
• The weight is 1200 grams;
• Excellent ax handle made of steel;
• Very low cost;
• Well sharpened.

Disadvantages:

• Approximately every fifth instance has a marriage;
• No hole for hanging.

Husqvarna 5769264-01

One of the best carpenter's axes. Its handle was made of wood, while it has an ergonomic shape and a hole for hanging. The total length of the tool is 375 mm. It differs in that the ax handle here sits on the handle, as if it were poured. Some buyers have no complaints even after two years of regular use of this ax. The fastening system consists of two wedges: one is wooden, and the other is steel.

The only serious drawback of the product is its price. It is explained by the fact that Swedish steel was used for the production of the shoe. We also need to remember that Husqvarna is not a Russian company, so some funds have been spent on the delivery of the instrument. In the rest, it's impossible to find fault with an ax.

Pluses:

• Sharp sharpening;
• The shoe is made of Swedish steel;
• The handle almost does not slip in the hands;
• For the production of the handle, quality wood was used;
• Optimal weight( 985 g);
• Good carrying case included;
• There is a hole for hanging on the hook.

Disadvantages:

• Overpriced.

MATRIX 21640

Nowadays, axes are being increasingly sold, the handle of which is made of rubberized fiberglass. MATRIX 21640 belongs to their number. Such a handle is good for several reasons. First, it reduces the weight of the instrument. In this case, the mass does not exceed 0.6 kg. Secondly, such an ax does not slip at all. Thirdly, it is impossible to damage the fiberglass handle, which has a positive effect on the tool life.

The top of the MATRIX 21640 is made of 60G steel, using the free forging method. Buyers note that the handle of this tool is not deformed under any circumstances. Also, they are delighted with the low expenditure of energy, which contributes to a decent inertia of the impact. Advantages:

• Handle can not be damaged;
• Rubberized surface absorbs all vibrations;
• Minimum effort required;
• The ax does not slip in the hands;
• Enough sharp sharpening;
• Durable ax handle;
• There is a hole for hanging.

Disadvantages:

• The weight is not enough for the most effective cutting.

The best universal ax

Fiskars X10-S 1015619

This ax meets absolutely all the requirements of both professional and ordinary person. The top and the blade of this tool are perfectly balanced, which makes the work safe and convenient. With the help of such an ax you can tirelessly cut small trees, shrubs and logs. And at moments of relaxation, the product is carried on the hook - this is precisely the purpose for which an opening is located at the end of the handle.

Toporishche this model is made of hardened steel. In part, this has contributed to a strong increase in the price tag. But the sharpening of the product will be extremely rare, if such a need ever arise. Still there is an antifriction coating, thanks to which it is possible to work even in the rain - corrosion on the tool does not manifest itself. The angle of sharpening the cutting edge is strictly 30. This ax can be praised for a very long time. Instead, we note that it is ideal for carpentry and carpentry. Do not like it only for tourists - they will be in shock from 440-millimeter length.

Advantages:

• Toporishte is made of hardened steel;
• Long and comfortable two-component handle;
• The hole for hanging is not forgotten;
• Teflon coating available;
• Optimum weight for use;
• The head is tightly fastened to the handle.

Disadvantages:

• Price tag will not like everyone;
• It is not recommended to knock the ax with the ax.

Best splitting ax

MATRIX 21816

Hand tools under the MATRIX brand have proprietary fiberglass handles. This ax is no exception. Its handle is made of the above material. In addition, the creators of her rubberized. As a result, the instrument turned out to be very beautiful. But much more interesting is the fact that he does not slip at all in his hands. And this is important, because the length of the ax is 880 mm. At a weight of 2 kg, the smell is sweeping and strong - it is impossible to slip an ax in any case.

There are special thickenings on both sides of the working cloth. It is thanks to them that the ax is called a cleaver. Wood under the onslaught of these thickenings splits even in the event that the impact was not very strong. One can not but note the fact that the canvas is made of steel grade 45 and is forged. The cutting edge has a hardness of 48-50 HRc according to Rockwell.

Pluses:

• On the sides of the blade there are special thickenings;
• Very long handle;
• The fiberglass material is rubber-coated;
• High blade hardness;
• The head is very tightly seated on the handle;
• Ax weight is intentionally increased.

Disadvantages:

• To many people it seems too expensive;
• There are specimens with poorly worked steel;
• Forgotten hole for hanging.

Best tourist axes

Bison 20643-06

A small tourist hatchet from the Russian manufacturer. Comes with a leather case designed specifically for the ax. The blade of this product is made of hardened steel. The handle is also steel, but on top of it is put on rubber, painted in blue-black colors. The ax weighs only 600 with a few grams. Due to the minimum weight and rubber grip, the tool does not slip at all in the hand.

Bison 20643-06 is well sharpened. It allows you to cut firewood for a fire and clear the place for an overnight stay. Buyers are most fond of this ax for the convenience of work and long life. There's nothing to break here.

Advantages:

• Compact size;
• Comfortable leather case;
• All-metal construction;
• Sharply sharpened;
• For the production of the blade, hardened steel was used;
• Ergonomic rubber grip.

Disadvantages:

• May seem expensive.

STAYER "TOURIST" 2064-06

Another 600-gram ax designed for use by tourists. It is also all-metal. But the rubber pad on the handle is less comfortable here - it can not be called ergonomic. Otherwise, there are no special differences. A protective cover is also supplied with this ax. Toporishche is made of forged tool steel. The blade has additional hardening, which will allow not to think about its sharpening for many years.

Advantages:

• Not the highest price;
• Rubber Handle;
• Ax - all-metal;
• Hardened blade;
• Optimal for tourist ax ax weight;
• There is a carrying case.

Disadvantages:

• Not too ergonomic handle.

The best ax hammer

Bahco 494-600

Some people need to get the maximum functionality from the ax. Most axes have a very small butt, which is why it can not be used as a hammer. Such people do not like such a product. They will turn their attention to Bahco 494-600.This tool has a design that will prove useful to both the roofer and the plasterer. To its handle is attached a two-sided working part consisting of a blade with a nail under it and a square striker.

The tool is very convenient to use, not least because of the steel handle with a rubber lining. He weighs only 847 grams. The length of the ax is 315 mm. The production of the tool is occupied by one of the factories located in Taiwan.

Advantages:

• Combines an ax, hammer and nail;
• Steel head;
• Robust steel handle;
• There is a non-slip rubber cover;
• Extremely long service life.

Disadvantages:

• Some people will find the cost too high;
• The creators forgot about the hole for hanging.

Which ax to buy

1. In case of finding a budget solution, we recommend to stop your choice on the ax IZHSTAL 030904-120.It is a carpenter's tool that will help to cut down the tree and chop wood. Also, its purchase will allow you to support the domestic manufacturer.

2. The best carpenter's ax is Husqvarna 5769264-01.It is made from high-quality Swedish steel - even with regular work, it is required to edit only once a year. Also, the tool features an excellent fit on the ergonomic handle. And only the price discourages the buyer.

3. MATRIX 21640 should be the optimal choice of carpenter. This ax has a small weight and a fiberglass handle. For its price, it is an ideal tool. But for very frequent works it is better not to buy it - it is better to purchase a heavier ax that speeds up the process.

4. If you are looking for a universal ax, then nothing better than Fiskars X10-S 1015619 not found. There is a two-component handle, and the blade was made of hardened steel coated with Teflon. As they say, I bought it and forgot it - it will not be necessary to sharpen an ax.

5. MATRIX 21816 is an ax with a fairly long handle. Its mass is deliberately increased to simplify the chop of firewood. It is with this task that the tool manages the best.

6. Tourists and ordinary fans of hiking in the forest should buy Bison 20643-06 or STAYER "TOURIST" 2064-06.These axes are all-metal, which indicates their almost eternal service life. Comfortable use is promoted by a rubberized handle. These tools are the best way to collect firewood for a fire.

7. If you wish to combine an ax and a hammer in one tool, we recommend that you pay attention to the Bahco 494-600.This hatchet is quite expensive. But it could not have been different, because its creators had to work hard on the design. Yes, and can not cost a cheap thing, the replacement of which in the next decade will not be required. Namely, this is the approximate service life of this ax.