Ozonator is able not only to purify the air and saturate it with freshness, but also to decontaminate the room, water, destroy bacteria, viruses and the smallest particles of dust, pollution. In order to choose the right ozonator, you do not need any special knowledge, it is enough just to determine where you are going to use it and how to regulate the power of such an air purifier.
Decide on the purpose of using
The most popular ozonizers today are universal, which can clean the premises and disinfect water. Such devices are equipped with a special tube and a sprayer for treating water in containers. They perform two functions - purify the air and disinfect the water.
In order to eliminate smoke, unpleasant odors in the room, sometimes to disinfect, destroy fungi, mold and microbes, it is best to choose an ozonizer-ionizer. Such devices are good in that they can perform two functions.
If you need to disinfect the room or remove smells, you turn on the ozonation mode. The rest of its time the device can work as an ionizer, cleaning the air from dust and refreshing space. The device does not require you to do a huge effort to clean it - just once or two weeks, wash the plates from dust.
For larger premises( more than 50 square meters), it is better to choose a model with the photocatalysis function. It will allow the device to work in the presence of people, removing the smell of ozone from the air.
If you need an ozonizer for a small room, for example a bathroom or a toilet, pay attention to the models with the minimum amount of ozone output. The minimum amount of ozone is enough to eliminate unpleasant smells and prevent the appearance of mold, and you will not hear the smell of ozone.
Look at the performance of
The main parameter for ozonator selection will be precisely the ozone performance. The larger it is, the more ozone is produced at the outlet.
- For premises with an area of up to 15 square meters.meters model with a capacity of up to 8 μg / meter cubic;
- For apartments with an area of 30-50 square meters.meters, you can choose an ozonizer with a yield of 10-12 μg / cubic meter;
- For large premises from 50-60 sq. M.meters suitable model, which has a capacity of up to 20 mkg / m3.
Look at the number of modes or the time of continuous operation of
The longer the device can work, the more ozone it can produce, which means that the ozone concentration in the air will increase. To normal oxygen, ozone decomposes in a couple of hours. When choosing a model, pay attention to the possibilities of the ozonator.
- If you need a device that can work in your absence, you need a model with the possibility of continuous continuous operation;
- If you need an ozonizer that will clean and decontaminate the room in your presence, pay attention to models with preset operating modes. For example, the device works 30 minutes, rests for 15 minutes, and then turns back on;
- If you want to control the amount of ozone produced by yourself, choose a device that is manually adjustable.
To rationally use the ozonizer, remember a few simple rules:
- 30 minutes - so long it will take an ozonizer to remove smells after repair;
- 15 minutes - this time is enough to remove the smell of smoke, destroy dust mites;
- 10 minutes - this time is enough to freshen the air.
Additional features of
Note the availability of such characteristics of the ozonizer:
- The possibility of continuous operation( more than 30 minutes) - you may need this feature in case of repair, if you need to remove the pungent smell of paint;
- Automatic control by weekly or daily timer - you simply set the timer, and the device will automatically turn on and off;
- The possibility of installing the device on the wall - then ozone will refresh the maximum amount of the area, and the smell you will practically not feel.
Knowing such simple features of the ozonizer, you can choose the optimal model, use it rationally, and the air in your room will always remain fresh, saturated with oxygen and clean.