How to make a ring of rubber bands?

Many fashionable women and needlewomen strive to create jewelry for themselves. Weaving of hand-made articles from rubber bands is an interesting and fascinating activity. These products do not need care, they are not afraid of water, and they are very easy to manufacture. Let's try to figure out how to make a ring of rubber bands.

to content ↑

Weaving methods

We can weave this decoration in the following ways, using:

• of the fingers:
• forks;
• slingshot;
• pencil;
• with the use of a special machine.

Important! Particularly beautiful are products made from multi-colored elements of juicy colors.

Weaving on the fingers

In this case, your own fingers are the working tool. Moreover, one hand will lead, and the other - an auxiliary.

Important! For right-handers, the main hand is right, for left-handed players - left. To make it convenient to hook up items, use a conventional crochet hook. & Lt;

So, let's get started! We will weave a ring of details of two colors:

1. Put the elastic on your finger, twist it with the "eight".You will get a loop, which you place on the next finger. Done! Lower the "eight" closer to the palm so that it does not interfere.
2. Put the second silicone ring on two fingers, but without twisting.
3. Pull the bottom element to the center through the top.
4. Repeat the same steps, but from the other finger.
5. Attach the following part without twisting.
6. Remove the bottom element from two fingers in a row, centrally, through the top.
7. After putting on the next elastic, repeat the whole process first.
8. Continue to put on new items and take off the bottom ones. The result is a chain.
9. Hook one side of the S-shaped fastener behind the first loop. The other end hook on 2 loops on the other side, for fastening.

The ring is ready!

Using the plug

This is a conventional tableware that can be used for needlework. With a fork, you can even weave a set of rings and bracelets. The principle of their manufacture is approximately the same, the difference is only in length.

We begin the weaving to make a ring of rubber bands:

1. Place an elastic band on the 2 prongs of the plug. Twist the "eight", put on the remaining two.
2. Lower the "eight" slightly to the base of the teeth.
3. Stretch the next part without twisting.
4. Pick up the bottom, pull up and to the side, release in the center.
5. Repeat the same steps on the opposite side.
6. String the next element.
7. Remove the lower part so that it is centered between the prongs of the plug.
8. Repeat the procedure until you obtain the product of the desired length. Then clasp the clasp.

Making jewelry using the slingshot

You can use one or more shades to make the ring.

Important! The product on the slingshot turns out more interesting and looks more beautiful than the woven on the fingers or fork.

Procedure:

1. Place the elastic on one of the tabs, twist. The second part of the "eight" place on the second horn.
2. String on each horn another rubber band, but no longer twisting it.
3. Grasp one edge of the lower element with a crochet hook, pull it upward. Similarly, pick up the edge on the other side of the slingshot, pick it up.
4. Put on the next elastic without twisting, repeat the entire algorithm first.
5. Carrying out the entire sequence of manipulations with each of the rubber bands being sewn, watch the length of the product.
6. After the chain of the desired length is obtained, attach the fastener.
7. After that, a completely finished product can be removed from the slingshot.

Important! The received ornament is universal. It is suitable for both boys and girls. Shades can be chosen at random.

to the contents ↑

"Spider"

Make a ring of rubber bands in the shape of a spider can be on a special machine, fork or slingshot.

Important! If you use black, an excellent addition to the "villainous" carnival costume for the New Year or Halloween. If you use bright and juicy tones, you will get a cheerful tropical simpatyaga.

So, for such an unusual product you will need:

• Slingshot.
• Crochet hook.
• Elastic bands( 10 pieces).
• Scissors.

Position the slingshot so that it is located with a notch to you. Then proceed according to this algorithm:

1. Place one rubber band on the left horn. She will not take part in making jewelry, but will be used as an auxiliary.
2. Screw on the right horn 1 rubber, making four turns.
3. Place one rubber band on both tabs in two turns, slightly slide downwards.
4. Reset the 4 turns of the bottom part from the right column to the middle between the protrusions.
5. To make the legs, add 2 gum rolls to the middle so that the top is on the right.
6. Hook the hook under the bottom element, take it by the right side. Insert it into the loop on the left, tighten it well. Using 2 more pairs of rubber bands and doing the same manipulations with them, get 3 pairs of legs.
7. Put the hinges of the "legs" on the slingshot and lower them lower so that they do not interfere with further work.
8. Place one rubber band on both tabs in 2 turns.
9. Reset the two lower turns from the right shoulder to the center.
10. Lift up the very first rubber, which sags and hangs. Place it in the center.
11. Pull down the bottom two turns of the rubber band from the left horn in the middle.
12. Pull and hold with your fingers dangling rubber. Throw 2 turns from the right shoulder to the left.
13. Reset the 2 lower turns from the left shoulder to the middle. Now you have 3 loops freely hanging on each of the ledges. Cut them in the middle. It will be paws.
14. Remove 2 turns from the left projection and tighten with knot. Two loosely hanging loops serve as a spider's head.

Decoration is ready, you can put it on your finger!

Important! Paws can be straightened, but chaotically located, they will look much nicer.

to the contents ↑

How to make a ring-flower from rubber bands?

The product is easier to weave than a spider, but it will look much more impressive:

1. Place the slingshot so that it is recessed towards you.
2. Screw on the right "horn" a red rubber band in 3 turns.
3. Take the 2 yellow rubber bands and put them on both tabs.
4. Using the crochet hook, remove the red element to the center so that it hangs on the yellow ones.
5. Transfer a 2 "tab" yellow from the right "horn" to the left. You made the first petal of the future flower. Do not remove it from the projection slingshot and acting on the same algorithm, prepare another 4 "petals".
6. When all the petals are ready, put the 2 yellow rubber bands on both horns, and then remove all the elements to the center. Pull off the ring.

That's all! Can be worn.

As you can see, this is quite simple and can be applied even to beginner needlewomen. When you learn how to weave such items, you can move on to more complex things - figurines of animals, patterned bracelets.