How to adjust the plastic balcony door?

InPresently replaced by wooden window frames and doors came more practical and comfortable metalstic structures. They have found their application in many spheres of our life: at home, at the office, at the dacha, in shops and other institutions. The excellent quality of the doors is rarely a censure, but over time even the most durable and reliable mechanisms require adjustment. If problems occur during the warranty service phase, the setup will be provided by the installer. And in case you have to rely on your strength, you just need valuable information on how to adjust the balcony door of the double-glazed window yourself.

to the contents ↑

Frequent operating problems

A number of the following symptoms help to identify faults:

• Drafts are of sufficient strength.
• Tight opening and closing the door.
• When using the door, it touches the box.
• The door is not parallel to the box.

Important! If you notice any of these symptoms, we recommend that you think about setting up the door structure.

to the contents ↑

Identifying the reason

In addition to the characteristic features, there are practical methods that will help determine the need for adjustment.

Method 1

For the first method, you will need a piece of paper:

1. Clamp the sheet between the door leaf and the box, tightly covering the doors.
2. Pull the paper.

If this is not possible, then no adjustment is required. If the sheet was pulled out fairly simply, it is necessary to adjust the door of the double-glazed windows, as, most likely, the mechanisms of the balcony door have weakened.

Important! It is recommended to carry out such manipulations along the entire perimeter of the structure.

Method 2

For the second method, prepare a simple pencil. With it, circle the contour of the leaf in the closed position. All lines must be strictly parallel to the edges of the door frame. The presence of deviations indicates a design imperfection and the need for adjustment.

Thus, it is possible to identify problems independently in two ways, or the different signs tell about it. It is possible to distinguish several of the most common problems of the balcony door:

• The door is not securely attached to the box. As a result, air flows into the room, creating drafts in the house, as the gaskets can not perform their functions. The solution to this problem is to adjust the locking mechanism.
• The lower part of the door clings to the threshold. This indicates the sagging of the sash under its own weight.
• Unscrewed handles. Of course, the permanent operation of the hardware leads to its damage, but this can be easily and quickly adjusted.
• The door leaf touches the box in the middle. Such a flaw happens if, due to deformation, the door has shifted. For example, this could contribute to the temperature drop. How to set up a double-glazed door in this case? Adjustment of door hinges is required.

to the contents ↑

Reasons for the occurrence of malfunctions

If suddenly the balcony door does not work perfectly, do not immediately blame the installers and complain about the poor quality of the product. Although, we will be frank, in some situations the cause may be poorly done work. But beyond that, there are other sources of problems.

Cause 1

In the process of using the balcony door, the hinges gradually begin to weaken. This is a completely natural course of events, which is typical for all metal-plastic structures. The main reason for this weakening is sagging.

Important! Doors, which have a two-chamber system, more quickly sag. This is due to the large weight of the structure, in contrast to the single-chamber design.

This fault occurs only after a few years. If you notice the easing quite quickly, after six months or less, perhaps the reason is different. Most likely, this is a careless installation.

Cause 2

Temperature changes and humidity level. This effect is particularly noticeable on the doors that are installed on the insulated or open balcony. Realizing the thermal insulation function, the structure itself is located on the verge of perceptible temperature changes, as well as the difference in the indices of humidity inside and outside. Such an effect reduces the service life of the product, as a result of which the adjustment of the double-glazed door is required.

Reason 3

Substandard materials, machinery and accessories. Unfortunately, in this situation, the adjustment of the design will not yield any positive results.

Cause 4

Errors in the installation process. Most often, such defects become noticeable almost immediately, so immediately contact the installer with the claim. During the warranty period, you will be free to repair any flaws.

Cause 5

In addition to the manufacturer's fault, there are times when problems in the operation of the balcony plastic door result from improper use of the device. Therefore, we recommend that you study some of the operating rules, as well as advice on the prevention of defects, which we will discuss further.

Reason 6

Another factor may be shrinkage of the building, which is most typical for wooden houses.

to the contents ↑

Tools for operation

During the configuration you need to know not only how to adjust the plastic door, but also where it can be carried out.

For this you will need the following tools:

• Hexagonal keys of different diameters.
• Measuring tape measure.
• Various screwdrivers: flat and cross-shaped.
• Pliers or pliers.
• Pencil.
• High quality PVC pads with adhesive layer.

After you have stocked up with everything necessary, we will proceed to specific faults and their adjustment.

to content ↑

Vertical adjustment

This adjustment method is used in such situations:

• There are dents on the seal at the top or bottom of it.
• The door clings to the threshold.

How to adjust the plastic door in height? To raise or lower the plastic canvas with a special screw, which is located on the hinges.

Important! For carrying out manipulations, you do not need to remove the door from the hinges.

Act this way:

• Install the door in rotary mode.
• Use a hexagonal wrench to turn the screw in the desired direction. The screw is located near the top hinge at the end of the door.

Important! Turning the screw clockwise raises the structure, and the movement counter-clockwise - lowers the door.

• It will be enough steam of turns.
• Then remove the plugs that cover the upper adjusting screws.
• Using the same key, perform the adjustment in the required direction of these screws.

Check the operation of the door, if the defects remain - repeat the adjustment.

to the contents ↑

Horizontal adjustment

How to adjust the plastic door on the balcony, if there is a skew? To correct the canvas in the left or right side allows the long screws, which are placed horizontally. The screw is hidden by a plug, which must be removed in advance. To eliminate skew, tighten the screw on the center and top hinges. Tighten the screw above.

Important! If the door can not be adjusted, then try to loosen all the horizontal screws, and then adjust them.

For this adjustment, the door must also be in the open state, it is not required to remove it from the hinges.

to the contents ↑

Door seizure in the middle

What should I do if the balcony door hits the middle of the box? This solution, in fact, refers to the horizontal adjustment, since the flap should be moved towards the hinges.

For this, rotate the bottom screw clockwise with a hexagonal wrench. So you bring the door closer to the loop. After that, try to open and close the door. If the fault persists, continue adjustment on the upper loop.

to the contents ↑

Replacing the seal

There is another problem that will raise the question of how to adjust the plastic balcony door. This is a significant deformation of the seal. It can arise due to several factors:

• Long absence of door adjustment and their prevention.
• Operation of a door with a skew.

The only solution is to replace the sealing material with a new one. You can buy it at the building store.

When choosing, it is important to take into account:

• Seal form.
• Cross section of the material.

Important! Both of these parameters must be identical to the old seal. The best option is to take a small piece of material with you to the store, and according to the available specimen choose a new one.

The seal is replaced as follows:

• The old material is removed using a flat screwdriver. Manipulate carefully so as not to damage the plastic surface of the door. Pick up the seal and pull it out of the grooves.
• Cleaning. Remove all accumulated dust and dirt, the remnants of the old glue. It is convenient to do this with a brush, and then wipe the entire surface with a damp, clean cloth.
• Apply a new layer of adhesive.
• The next step is fixing a new seal.

Important! A single cord should be placed in the grooves in such a way that it does not sag, but is not unnecessarily stretched.

• Surplus material is cut with scissors, and edges at the junction are connected with glue.

to content ↑

Adjusting the density of the door

We bring to your attention a simple experiment with which you can determine the need to adjust the door clamp. The essence of the experience is as follows:

• Open the door by 15 cm.
• Watch its movement for a while.
• If the door remains in the same position, then everything is in order. If the canvas arbitrarily moves, opens or closes, then the glass door needs to be adjusted.

Important! A mandatory condition for this method is the absence of drafts in the room.

Depending on the season, the following fitting mode is set:

• In the summer period, the clamp should be weaker. The reason for this is plastic, which under the influence of high temperatures has the ability to expand.
• During the winter months, the adhesion should be maximized to prevent cold air and drafts.

Important! It is recommended to control the tightness of the door leaf in a constant mode. Do not wait for the appearance of obvious problems.

You ask how to adjust the plastic door? The construction of the structure is completely uncomplicated, so you can easily do it yourself. To do this, you need a hex key. And the actions are as follows:

1. On the door leaf, locate the locking pin.
2. On its surface there is a special notch that indicates the degree of clamping.
3. Turn the pin in the desired direction. Turning the notch toward the frame weakens the tightness of the door, and turning in the opposite direction increases the clamping force.

Important! If the pin is installed at the extreme level, the adjustment will not work.

In this situation, you need to adjust the position of the double-glazed windows:

1. Remove the fixing beads.
2. Place the gaskets in the required places. For these purposes, there is also a special device - a scapula.
3. The correct location of the gasket, as well as its thickness, ensure that there is no distortion.
4. After debugging, set the glazing beads in place.

to the contents ↑

Door handles - adjustment of the

hardware Now let's look at how to adjust the balcony door of the double-glazed window if the malfunction consists in the poor functioning of the handles.

There are two types of hardware failures:

• Slackness.
• Tight and torsional rotation of the handle.

Accordingly - there are two methods of adjustment:

1. Solving the problem of opening the door handle is very simple and fast. It is necessary to remove the protective cover from it, under which the screws are located. Tighten them with a screwdriver, and the handle will again reliably adhere to the canvas.
2. In the second case, it is necessary to adjust the door of the double-glazed window, the methods of which we described in detail above.

Important! If after adjusting the door itself, there is no improvement in the handle, then it is necessary to dismantle the old hardware and install a new one.

Unscrew the screws holding the product, then remove it from the door leaf. Install the new hardware and screw the screws into place.

to the contents ↑

Fault prevention

The best way to deal with faults is to prevent them. The first thing to do is to provide for possible problems at the stage of the door installation. Therefore, the production and installation of a plastic door is best ordered from a company with a good reputation. The firm must ensure the quality of the design, fittings and mechanisms.

Having made the right choice, be sure to check the process of installing the door. After its termination before acceptance of work, focus on such important points:

• The door should be easy to open and close, do not cling any parts of the box.
• The door leaf must be evenly and tightly attached to the box along its entire perimeter.
• The blade must be placed vertically on the hinges. Do not be lazy and check this parameter with the help of the building level.
• Check that the structure is sealed and there is no draft.
• Open the door halfway and leave in this position. Cloth should not be arbitrarily closed or opened.

Important! Improve the knowledge of the correct installation will help video instructions, which can be viewed on the Internet. Preview such videos in advance, and control over the installation will become more meaningful.

If you do not want to think about how to adjust the door of a double-glazed window, then preventive actions can be added:

1. Regular lubrication of working mechanisms.
2. Seal treatment with silicone grease, which increases the service life of the material.
3. Installation of the door opener. This mechanism protects the loops from loosening, as it does not allow them to contact the door frame. In addition, this device will protect the blade from damage. As a result, setting up the door will be much less necessary.
4. Cleaning and maintenance of the structure.
5. Microlift installation. This device redirects the weight of the door in a closed mode to itself, which does not allow the canvas to sag.
6. Regular inspection of fasteners.

to the contents ↑

Rules of operation

Let us recall a few basic rules for the use of metal-plastic constructions, which increase their service life and free you from unplanned adjustment of products:

• In case of strong wind, the balcony door must be closed. The powerful pressure of air masses on the structure will not be reflected in it in the best way.
• Do not stack objects between the door leaf and its box, or directly under the door leaf.
• Do not hang anything on the handle. The same applies to the door leaf.
• Do not apply excessive force and pressure when closing or opening.
• Do not be zealous when turning the door handle.
• Avoid mechanical impact on the surface of the plastic door to prevent scratches on the material.

Although the malfunctioning of such designs does not occur often, it is still worthwhile to have information on how to adjust the plastic door on the balcony if necessary. Of course, you can resort to the help of a specialist, issue an application, wait for the appointed time and hope for his professionalism. By the way, not forgetting about the material side of the issue. You can fix all the shortcomings yourself, especially since it's quite simple and fast. And timely preventive maintenance and proper operation guarantee you a long and effective use of the doors.