Bathroom heater: which is better infrared or fan heater

When it's cool outside, even frosty bathroom heater becomes a very relevant item. Its presence is especially important if the family has small children, elderly people.

Ordinary radiators or additional devices can be used to heat the bathroom.

Recommendations for choosing a bathroom heater

The requirements for bathroom heaters are as follows:

• should take up little space, since most modern bathrooms do not differ in solid footage;
• to be maximally adapted to rooms with high humidity, temperature drops;
• protection against water ingress inside the device, on its live parts is necessary;
• the more spacious the room, the more powerful the device is needed;
• the design is completely safe for children, adults, pets;
• the appearance of the device is matched to the existing interior.

The bathroom heater must be adapted to work in a humid environment

Types of bathroom heaters, their capabilities

There are many types of toilet and bathroom heaters:

• water heating radiator;
• electric convector;
• infrared heater;
• thermal fan;
• panel heater;
• oil radiator.

Infrared heaters: efficient heat

The difference between an infrared device and others is that it is mounted on the ceiling, but it warms not the air, but the floor and walls of the room. The product consists of a quartz emitter - a special plate that generates heat, heating up to 260 degrees. Such a heater practically does not take up space; when heated to a certain limit, it turns off on its own.

When choosing an infrared type panel heater, make sure that the model is designed for rooms with high humidity.

An interesting feature of the device is that the direction of the beams is easy to adjust, heating the desired place, which is especially convenient in spacious rooms and allows you to economically use electricity. A high level of humidity is not terrible for the product, and the high cost will pay off with the benefits obtained from its use.

Electric convector

In this heater, as in many others, the heating element is made of a powder composition with a thin heating thread made of nichrome. The case is made of silumin, the design itself is modular (allows you to change the power level, dimensions of the device), wall-mounted.

The principle of operation of a convector heater

They regulate the temperature with a thermostat, the level of internal heating is 350 degrees, the case is 55. The product is characterized by high electrical safety, suitable for heating humid rooms.

Wall-mounted models of electric convectors are intended for the bathroom.

A variety of such heaters is also produced that work without infrared radiation - completely silent, outwardly reminiscent of a fragment of horizontal blinds.

Fan heater

A simple and convenient bathroom fan heater, the most affordable, heats small spaces quickly. The power of the device is 2000-2500 W., the dimensions are the smallest, the shape is different. The design consists of a fan in a plastic casing, a spiral heating up to 800 degrees. Heat spreads around the room with a fan, quickly warming up the room.

Fan heaters are available in various capacities and sizes, including built-in models

Fan heaters for any area of ​​the bathroom, very compact, lightweight, easy to install on the floor, wall, furniture surfaces and window sills. The main advantages are light weight and size, beautiful appearance, ease of use. Cons - the process of work accompanied by noise, with poor care (if a lot of dust has accumulated on the device) - an unpleasant smell.

Oil radiator

Oil radiators are a good, popular solution for both home and office. It is convenient to heat the bathroom space with them, since the device is easy to move from place to place. The power of such a completely safe device is 1000-2600 W. It consists of a steel body with an electric coil, mineral oil inside.

The oil heater outwardly resembles a conventional heating battery, only with a wire and a portable

Principle of operation: the coil is heated by electricity, the resulting heat is transferred to oil, which boils, heats the body and the surrounding air. The structure itself is usually made of small metal rib sections. The more "ribs", the stronger the heat transfer. The heater is equipped with a sensor that turns on the device when it gets cold, turns it off after reaching a certain temperature.

The more sections a model has, the more area it can heat

The main advantages of the product:

• safe, but quite sufficient temperature to heat the room - about 60 degrees;
• the device does not emit any sounds during operation;
• equipped with a convenient self-timer;
• there are wheels for moving along the floor;
• some models have a built-in air ionizer.

Panel heaters

Panel electric convectors heat rooms of different sizes, their power is 2500 watts. The structure is made of an iron body with a heating coil inside. Cold air, passing through the place of heating, becomes warm, heats up the radiator to the desired temperature. The device is wall-mounted, but more efficient when installed on the floor. The best models are those that have a ceramic heating element - they are not able to "burn" air. For wet rooms, special structures have been created that can work in such conditions.

The indisputable advantage of electric panel heaters is their compactness and the ability to quickly install.

The advantages of the product - almost no noise, easily moves to the right place, quickly warms up the room, is distinguished by safety, attractive appearance. Disadvantage - a built-in fan (creating noise) is required, which speeds up the process of warming the room. There are also film convectors that look like a roll and are placed on the door, wall.

Water heating radiators made of aluminum, copper

The radiator is made of pure aluminum or copper-aluminum. Such a structure weighs much less "old" cast iron products, looks more beautiful, and due to its special structure, it stabilizes the humidity in the bathroom.

Such radiators look quite attractive and fit well into the interior of the bathroom.

Due to the fact that the radiator warms up quickly, the room is also heated in a shorter time. The price of the product is relatively low; installation also does not cause problems.

A heating radiator can be combined with a heated towel rail, such a model is included in the hot water circuit and works independently of heating

Additional heating methods

In addition to the main ways to warm up the bathroom, there are alternative ones:

• "warm floor";
• "Hot plinth";
• installation of heated towel rails.

Warm floors perfectly maintain the required temperature in the room, they are created by laying an electric cable in the form of loops, waves. It is only important to perform high-quality insulation, waterproofing. The thickness of the floor is comparatively high here, and the cost of the work is high.

The electrical system provides comfortable floor heating in a city apartment

In private houses, a water-heated floor is more common, which is cheaper to operate.

Hot skirting boards are special pieces in the form of corner floor panels with heating elements hidden inside. Such heating is very efficient and takes up almost no space.

Skirting heaters distribute heat more evenly and create a comfortable temperature up to 1.5 meters above the floor

Heated towel rails come in the form of water heating pipes or electric ones, they are perfectly combined with any other heating devices.

There are countless models of heated towel rails available, among which you can choose the right option for any interior

The most effective are ladder models.

Conclusion

The choice of a suitable heater for a toilet and a bathroom in an apartment, a private house, is carried out at the stage of repair or after its completion. A properly selected device will allow you not to freeze after taking a bath, shower in the cold season, without disturbing the existing interior design.

Video: heater "Step" for the bathroom