How to easily remove whitewash from the ceiling

Renovation starts from the ceiling. And this is natural. After all, any dirt falls down, it will not fall up on its own. If the ceiling becomes the repair zone, then a lot of different work will have to be performed there - washing, leveling, plastering, chasing channels for electrical wiring. And every operation comes with a bunch of rubbish. And the very first action in a serious renovation is the removal of the old whitewash. This technological operation is very time consuming, requires the expenditure of physical efforts, since the field of activity is at a height - and not to the side, but directly overhead. But skillful people have come up with many ways to facilitate and speed up this work, how to simply remove the whitewash from the ceiling.

Methods for removing whitewash from the ceiling

Whitewashing is a layer of lime or chalk applied to the ceiling in the form of a thick solution. This operation makes the ceiling bright white but matte. Looks beautiful. But over time, the elegance decreases, and in the next renovation, the old whitewash needs to be removed.

There is a radical way to get rid of this unpleasant operation. It is necessary to make a decision to make a stretch ceiling in the room. Then you don't have to touch the old whitewash. In this case, it does not bother anyone. In all other cases, the ceiling must be clean. According to the old whitewash, the ceiling cannot be painted with water-based paint - you will get ugly lumps. In this case, it is impossible to stick wallpaper or polystyrene tiles on the ceiling, they will fall off. If fungus or mold appears, the ceiling must be thoroughly cleaned to the floor slab and the entire surface must be disinfected.

PHOTO: ivd.ru

If the old layer was thin, then you can do without removing it. But the re-whitewashing must be the same material. To determine it, you need to lightly sprinkle water on the control place. If the drops are immediately absorbed, then the coating was chalky, and if they remained on the surface, then the ceiling was whitewashed with lime.

PHOTO: postroika.biz

When choosing any method of removing whitewash from the ceiling, the work will be accompanied by dirt. You cannot avoid its appearance, and you need to prepare for this. Everything that is possible must be taken out of the room. Heavy furniture should be carefully covered with foil, the edges should be glued with tape. The floor should be covered with either foil or thick cardboard. You can throw newspapers, but they will get confused when walking. You need to protect windows and window sills. Take care that dust and dirt do not enter other rooms. Put a wet rag by the door to wipe your feet and not spread dirt throughout the apartment. The room must be de-energized, because during operation, the electrical wiring can be inadvertently damaged.

The contractor himself must take care of his own safety. Wear sturdy protective clothing that does not leave exposed parts of the body. A hat on the head, eyes to protect with glasses, respiratory organs - a respirator, in extreme cases - a thick gauze mask.

And you need to work from a stable stand, your own growth does not always allow you to easily reach the ceiling. An old table or a small, stable ladder is suitable for this.

Whitewash removal methods are wet, with glue and dry.

The wet method boils down to washing off the old whitewash from the ceiling. If the old whitewash is lime, then you first need to soak it well, and then remove it from the ceiling with a spatula with layers. You need to soak with a roller, under which a tray with warm water is attached on a stick. Well-soaked lime can be easily separated from the ceiling. It is recommended to moisturize twice with an interval of 15 minutes. After removing the layers of lime, you need to rinse the ceiling with a wet rag, dry it and check the quality of your work.

A professional remover can be used to remove old whitewash. It softens the old layer better than water.

PHOTO: postroika.biz

Slightly less dirt is provided by a way to clean the ceiling with newspapers and paste. The composition is cooked from flour in a proportion of 100 g per 1 liter of water. With welded paste, you need to abundantly grease a newspaper sheet and stick it to the ceiling - and so glue the entire ceiling. When all the newspapers are glued and dry, you need to try to tear them off the ceiling with a sharp movement. This should be done only after the newspapers are completely dry. If you're lucky, a good layer of whitewash will come off along with the newspaper. Then the vacant space just needs to be rinsed with a rag or sponge. You can use wallpaper glue instead of paste.

The dry method of cleaning the ceiling is the simplest, but also the most dusty. All work consists of scraping off the old whitewash from the concrete slab. To prevent everything from falling to the floor, a small container is attached to the bottom of the spatula, which must be emptied periodically.

PHOTO: ivd.ru

Conclusion

Each master has his own favorite ways and methods of doing a particular job. But he is a master because he chooses the one that will give the greatest effect in a particular setting, and he masters these methods perfectly.