Frying pan with non-stick coating - a necessary thing in life. But there are different types of coverage, and it is important to choose a pan with a good coating, which will last a long time. And if you did not initially understand the goals and objectives for which acquired pan, you can waste your time and money.
Frying pan in the kitchen - one of the most important elements of the utensil.
Content
- 1 Advantages pans nonstick
- 2 Varieties of non-stick pans
- 2.1 by appointment
- 2.2 by material
- 2.2.1 Cast iron
- 2.2.2 aluminum
- 2.2.3 steel
- 2.2.4 copper
- 2.3 Type of coating
- 2.3.1 Teflon
- 2.3.2 cast aluminum
- 2.3.3 ceramic
- 2.3.4 Marmara
- 2.3.5 titanium
- 2.3.6 granite
- 3 What is the term of service with the AP pans coated
- 4 How to choose the best frying pan coated
- 5 Top 10 best pans new generation
- 5.1 Polaris Gourmetceramic GC-28W
- 5.2 Tefal Supreme gusto H1184074
- 5.3 AMT Gastroguss AMT526
- 5.4 TimA TVS Art Granit AT-1026
- 5.5 NEVA METAL WARE Karelia
- 5.6 Granite dream
- 5.7 Kukmara Tradition s283a
- 5.8 Rondell Mocco RDA-276
- 6 VIDEO: How to choose the right pan for the kitchen.
Advantages pans nonstick
Using examined pans used in the kitchen for the following reasons:
- Non-stick coating allows heat treating the product with a small amount of oil, which leads to the fact that the dishes are more useful, but it does not lose its flavor.
- It allows you to not use aggressive detergents.
- Suitable for any kind of thermal treatment of products.
Each family at least three of them: for frying, sautéing or baking, for pancakes.
As well as:
- non-stick coating may be applied on any pan, whether it is round or square;
- easy to clean;
- economy.
Varieties of non-stick pans
Basically pans differ in appearance and material on the use of coating technology. There are those who do not stand up and years of service, and some are for 20 years.
In the market plenty of offers from different manufacturers for different types of plates, a variety of models, forms, etc.
by appointment
Regardless of the destination pans, plates can be coated with non-stick. Among these kitchen items are found as follows:
- for eggs;
- pancake makers;
- wok;
- grill;
- for steaks;
- for baking.
Variety makes the consumer think carefully as not to be trapped in a store and buy high-quality dishes, which will last a long time.
In principle, for each dish you can find your pan. It is important to understand what dishes will be prepared in the pan and follow the recommendations. For example, in an oven pancake is best only pancakes, because it will have less to wash the non-stick coating. After baking, the pancake bottom and walls should be wiped clean with a cloth cover with a lid and remove crepe until the next use.
by material
Quite different pans of the base material onto which a non-stick coating.
Cast iron
The cast-iron frying pan - it is almost an ideal base for coating.
- fused material is well coated;
- good thermal conductivity;
- excellent for high temperatures.
Cast iron pans are ideal for extinguishing products as iron warms evenly, but for a long time.
aluminum
A complex material for coating. Because aluminum is easily overheated and deformed, it can harm the integrity of the coating and it cracks and chipped. But allowed options when aluminum coated with enamel. This cookware is suitable for slow stew.
Pros only easy and fast warm-up.
steel
The best option when buying a steel frying pan - a frying pan with non-stick functions. Because just at the bottom of the steel is difficult to fry anything, the food is undercooked, and then very difficult to wash the dishes.
The most common material is suitable for use in the home.
copper
Just in this embodiment, the coating performs well function stainless steel, because the specific heat of copper enables the steel to warm up to the desired temperature, but do not overheat. In such a frying pan good products which are susceptible to any odors. Because stainless steel does not come into contact with extraneous smells.
Well suited for dishes where you must constantly change the temperature.
Type of coating
The coatings are different, they are made from different materials and application equipment is also different.
Teflon
Coverage of the last century. It is so it was considered once produced more modern polymers. The fact that the strong heating to 250 ° C Teflon begins to exude toxins. And things quickly lose the previous form, if they are used intensively.
Choose a Teflon frying pan for cooking eggs, fried potatoes, pancakes, muffins, toast, vegetables.
cast aluminum
Equipment production and application of such material to make it possible to economically attractive metal of good coverage. The production forms of melted aluminum, making the workpiece and allowed to cool. Then, using the same technology make the next layer.
Such dishes turns massive and heavy, with a nice thick bottom.
ceramic
This coating was replaced by PTFE. Food is processed without the addition of fat, but it retains all the flavor, and, above all vitamins and useful microelements. But the life of a small frying pan, only 8 -9 months of active use. In this case, it must be handled very carefully, otherwise there will be chipped.
This dish can not be washed aggressive detergents.
Marmara
Teflon impregnation with the marble chips. This combination makes the Teflon less prone to chipping and extends the service life. If the coating is applied in multiple layers, the product can last a very long time.
Not inferior in terms of frying pans with Teflon coating.
titanium
Such a coating is not subject to deformation, does not come into contact with food and duplicates the properties of cast iron. Surpassing his only one, is not pricked with a strong impact, as it can make iron. Often three types of such deposition on the base material:
- mixture of particles of titanium fine fraction with teflon;
- ceramics and titanium;
- a polymer film with a titanium coating.
The titanium coating is used as a topsheet for cast iron, it does not rust pan.
granite
The composite layer of polymer and crumb applied to granite type diamond coating or titanium. Also solid upper layer with excellent protecting properties.
The main thing - among many options to choose quality products.
What is the term of service with the AP pans coated
First of all, the service life depends on the owner's ability to deal with the product. If a person buys a Teflon pan and uses it on the strength of two times a week to cook an omelet, it will last much longer than indicated in the passport.
Pay attention to the well-known manufacturers, branded dishes to order more costs, but the quality of their respective.
The service life depends exclusively on the cover:
- Teflon - up to 12 months;
- Ceramics - up to 9 months;
- Enamel - up to 2 years;
- marble - up to 15 - 20 years;
- titanium - up to 30 years;
- granite - up to 15 years.
Handle as possible should be removable, then you can put the pan in the oven.
How to choose the best frying pan coated
It all depends on the purposes for which selected dishes and how often it will be used. But in any case, it is better one time to provide themselves with an expensive skillet over many years, than every six months to change the dishes.
Be sure to ask when buying, included in the package cover, otherwise it will have to choose, and it is a waste of time.
Top 10 best pans new generation
When choosing a pan is best to choose the dishes from well-known brands.
Polaris Gourmetceramic GC-28W
Make articles of cast aluminum. Warranty for about 2 years. The average price segment from 2000 rubles.
Wok Polaris "Gourmet Ceramic", made of high-quality cast aluminum, is heated quickly and uniformly distributes heat.
Tefal Supreme gusto H1184074
Articles made of teflon good quality. The warranty on the product about 1.5 years. Prices from 1500 rub. It is impossible to overheat the product, and use aggressive abrasive.
Round pan grilled Tefal Supreme Gusto series of cast aluminum will be indispensable assistant in the kitchen of every housewife.
AMT Gastroguss AMT526
Heavy-duty coating with the addition of iron. These pans are not afraid of overheating, long retain heat and can be washed in the dishwasher. The average price of 4000 rubles.
This frying pan or sauté pan perfectly accumulates heat, it heats evenly and did not cool down.
TimA TVS Art Granit AT-1026
Granite, the warranty period of about 15 years. Prices from 3000 rub.
Frying TimA "Art Granit", a non-stick coating, with a removable handle.
NEVA METAL WARE Karelia
It produces all kinds of pans with marble floors. Product of excellent quality. A wide range of pans for any recipe. Price segment 2 500 rubles. per pan for fried eggs.
Non-stick coating ruggedized 2 times thicker than usual and ensures a fast and uniform heating.
Granite dream
Granite with added teflon. Pan desirable calcined before use. The estimated cost of 1200 rubles.
Dishes "Dream" series Granit - products is of cast aluminum with a coating of non-stick material, which has high strength due to the content of particles of minerals.
Kukmara Tradition s283a
The two-layer coating, reinforced with ceramic chips. The exemplary life of 2 years. Price from 2000 RUB.
Frying "Kukmara" manufactured by die casting of an aluminum alloy of special food-stick coating on an aqueous basis.
Rondell Mocco RDA-276
The aluminum pan coated with titanium. Due to such a mixture does not serious but durable.
Frying Rondell Mocco has a three-layer non-stick coating, has many advantages.
