After each cooking on the walls of the oven is still a large amount of fat that you want to clear
CONTENT
- 1 What is - catalytic cleaning of the oven
- 2 The pyrolytic cleaning oven - what is it
- 3 Hydrolysis cleaning oven - what it is and how it works
- 4 The traditional way of cleaning the oven - what is it
- 5 What type of oven cleaning is best
- 6 What better cleaning of the oven, according to experts
What is - catalytic cleaning of the oven
many users cookers with oven read the manual for the purchased technique about the existence of such a function, but do not understand what it is - the type of catalytic purification. What insight into the essence of the process, it is necessary to get acquainted with the peculiarities of the technology, which is increasingly equipped with modern stove with oven.
NOTE!(Click to see)
The principle of operation is to cover the wall and the fan blades special enamel, which has a porous structure, invisible to the eye but with properties similar to blotting paper.
Plates with catalyst technology have a coating of special enamel layer
What does it mean catalytic cleaning of the oven? In the process of preparation on the internal surfaces of the oven accumulates a lot of fat. For its high-quality removal of activated process of chemical decomposition. The following components are allocated a result of the chemical reactions:
- carbon;
- organic;
- water.
For regulating the decay process meet the grease substances present on the porous surface of the enamel. To implement such a method of purification requires that enamelled part included the following components:
- absorbent containing nanoparticles;
- special substrate;
- oxidizing agents required for the catalysis of chemical reactions of decomposition.
NOTE! (Click to see)
Most quality oxidizing reagents considered copper oxide, cobalt, cerium, or manganese dioxide. Usually the active substance is applied to the top and back panel of the oven, and they are kept on the blades.
The process of purification by the catalytic process occurs during cooking, which significantly saves time
One of the positive features of the process of catalytic cleaning of the oven, in the opinion of buyers is the lack of need for human involvement in the process. To begin operation only requires heating oven up to a certain temperature. In most cases the beginning of the purification occurs at achieving 140 ° C, and the best efficiency is achieved in terms of 200-250 ° C. After completion of the cooking housewife need only wipe the surface with a damp cloth to make it look like new.
Catalytic oven cleaning system: pros and cons
Any technology has its advantages and disadvantages, the knowledge of which allows you to make the right choice when purchasing new equipment. System of purification oven also has its pluses and minuses. Positive features of the method are:
- fully automated start-up during cooking;
- saving energy, time, and power;
- versatility, which makes it possible to use the technology in any type of oven;
- the presence of a special coating does not affect the value of the finished product;
- producing catalytic enamel principle unchanged, so any brand cooker will be characteristic qualities;
- all manufacturers have in their model range oven, equipped with a similar function, therefore, will have no choice problems.
When using this method optionally removed from the oven baking or lattice
Among the shortcomings of this method should be highlighted:
- a lower cleaning performance when compared with other techniques (hydrolysis or pyrolysis);
- bottom of the oven and the door surface have catalytic properties, since the coating is sensitive to the ingress of sweet or dairy products;
- maximum efficiency is possible to achieve only with frequent use, because at one time did not manage to clear the severe pollution;
- the average life of the catalyst plate is 5 years, after which it needs to be changed.
Burnt sugar will not be able to clean the catalytic method, since the enamel is sensitive to this product
Especially catalytic ovens
Technics, having similar functions, has some specific features. They should be taken into account in the decision to purchase is a catalytic oven:
- It should prevent the surface enamel sugar or dairy products because they can damage the active layer. That is why the bottom of the oven is not covered by enamel. Therefore, it will have to be cleaned by hand with the use of household chemicals or grandmother's recipes.
- Often the question arises, what type of cleaning the oven better. Immediately we can say that the palm does not belong to the catalytic method, since it is less effective than other methods. When cooking can be allocated a large amount of fat that is not cleared the first time that it causes further combustion.
- Material wall coating sensitive to abrasion, so to maintain its integrity is required to use a soft sponge and means devoid of large particles that can ruin the surface.
- The service life of the catalytic panels is 5 years, after which it is required replacement. This is done independently of the instructions from the manufacturer, or you can seek help from the Service Center.
Only soft cloths should be used for final cleaning, to avoid scratching the surface
NOTE!(Click to see)
Some manufacturers bilateral panel. By reducing the cleansing qualities of the protective surface should just turn them upside down.
In addition to the panels of the oven system can be equipped with special filters to capture the fat that prevent the formation of a large amount of plaque on the walls, which reduces the duration of the catalytic process in panel repeatedly. Filters can easily be cleaned, only pre oil is drained from them.
Pyrolysis - is heated to very high temperatures
The pyrolytic cleaning oven - what is it
A further way of obtaining clean the inner surface of the oven is the process of pyrolysis cleaning. What it is? The essence of the method lies in the title, as translated from the Greek "feast" means "heat" and "lizus" - "decay". Otherwise, this technology is called thermal decomposition as to remove oil residues requires heating the interior space of the oven to at least 450 ° C. Under the influence of such high temperatures all organic compounds simply burned to produce ash that is simply removed from the oven with a cloth after it has cooled down.
Through pyrolysis manage to cope with even the most severe contamination
IMPORTANT!(Click to see)
The pyrolysis process is possible only in the electrical model, as gas devices are not able to heat in excess of 250 ° C.
Advantages and disadvantages of the method
This method also has a number of invaluable advantage that coexist with disadvantages. They should be considered to become the owner of the oven with a pyrolysis cleaning if desired. Advantages of the method are:
- high efficiency. When choosing which method of cleaning ovens better pyrolysis confidently holds the leading position, because through this technology manages to get rid of even the most long-standing and strong pollution;
- versatility, allowing to carry out the removal of all types of plaque;
- cleansing of the entire area of ​​the oven, which is especially important to remove dirt in places where using a different method would require only manual cleaning;
Oven for the pyrolytic cleaning equipped with special heat-resistant glasses
- no need to use household chemicals, after which remains plaque and bad, affects the quality of the food.
The disadvantages of this method of treatment can be considered:
- higher cost equipment from pyrolysis, which is caused by the use of heat-resistant steels and especially tempered glass to withstand elevated temperatures;
- the duration of the cleaning process, which may last up to 2 hours;
- power whose magnitude depends on the degree of contamination, but on average ranges from 4 to 7 kV;
- requirements surrounding the furniture, which should also withstand higher temperatures;
- the presence of an unpleasant smell. Oven, equipped with pyrolysis function, has special filters to trap odors, but very dirty, they just can not cope with their tasks.
Gas ovens deprived pyrolysis function because they can not be heated to the desired temperature
How to use pyrolysis
To pyrolysis cleaning process was quality, required to comply with certain rules, which also provide the safety of others during the procedure:
- Pre should be removed from the oven pans and gratesThat is simply not designed for such temperature conditions.
- When selecting a particular model should pay attention to the presence of the door lock function, to be activated when the temperature is raised to 200 ° C.
- cleaning is recommended at least once a month, to prevent the accumulation of a significant deposit. Many modern stoves are equipped with a special catalyst, determining the degree of pollution and notifying the owner of the need for cleaning.
IMPORTANT!(Click to see)
Even with a lock in the low-cost models there is a significant heating of the glass, so during the purification, it is desirable not to allow the children to the plate.
When pyrolysis cleaning should not keep children away from the stove, since the door can become very hot
Hydrolysis cleaning oven - what it is and how it works
Another method of cleansing the internal surfaces of the oven is the hydrolysis, or steam cleaning oven. What it is? The method involves the use of a special reagent which is called the hydrolysis liquid. It is poured into a tray, and the oven is turned on. Gradually generate steam begins to settle on the walls and leads to a softening of the fatty plaque. Further there is a natural drainage of the fat in the liquid sump.
IMPORTANT!(Click to see)
If heavily soiled, such a method is not enough, and finish cleaning is necessary to carry out manually.
Steam cleaning is the third method of cleansing efficiency oven
The main requirement for a modern oven, has a function of the hydrolysis treatment, is the production of surfaces quality enamel having resistance to acids, to prevent the ingress of oil into the apparatus.
The advantages and disadvantages of steam cleaning
Knowing what - cleaning oven with steam, allows to highlight the advantages and disadvantages of this method. They should also be taken into account when choosing a new oven in the kitchen. method advantages are:
- the simplicity of the method;
- low cost;
- implementation of the process without the use of corrosive reagents;
- purification procedure takes place at low temperatures, which allows to keep the surface of the oven.
If there is no tray for loading water, you can use a heat-resistant bowl
The disadvantages of the process are:
- the need to use a cloth or sponge to remove the softened fat;
- additional purification independent elements;
- the inability to remove the old grease.
How to carry out the hydrolysis cleaning
Hydrolysis process of purification of the oven, which is called AquaClean or Aquasmart, occurs in several stages:
- Preliminary it is necessary to remove all the extra items such as baking trays, grids, attachment.
- Next to the desired mode and exhibited cyclical, with the support of this technology the control panel is selected.
- The right amount of liquid is poured into the pan, or an indentation at the bottom of the oven.
When hydrolysis cleaning is required to remove from the oven all the additional elements
- After completion of the evaporation process should give the oven a little cool and clean the surface with a clean, soft cloth.
NOTE! (Click to see)
Low model plates are not always equipped with a special tray of water, so they steam cleaning process can be accomplished by pouring liquid in bakeware, which is installed on the lattice.
Traditional methods involve the use of household chemicals and their own hands
The traditional way of cleaning the oven - what is it
Perhaps the last method to achieve cleanliness inside the oven is a traditional method, involving the use of industrial detergents, sponges or rags and their own hands. According to the majority of housewives, this method is the most costly in terms of time and effort. apply not only Makeup Shop For purity, but also traditional recipes (lemon juice, vinegar, baking soda) can be used.
Advantages and disadvantages of the conventional method
Speaking about the mechanical method for removing grease and dirt, especially deficiencies should be listed, because they are more obvious than the advantages. The disadvantages of this method include:
- mechanical nature of the work;
- separate purification of all the details, including the door;
- means containing insufficient abrasive bad fat was removed, and the use of powders may mar the surface;
- harsh chemicals leave the smell.
Each kitchen there are components for preparation of the national prescription to cleanse the oven
Advantages of this type of purification are:
- minimum cost, as it requires no special purchase oven;
- lack of spending on electricity.
How to clean the oven "grandmother" methods
there are components in the kitchen every housewife, which allow for the purification of the oven in the traditional way. These include:
- soda;
- vinegar;
- salt;
- lemon.
Pasta of soda and vinegar leads to violent reactions which result becomes fatty plaque removal
From the water, vinegar and baking soda can be prepared in a solution that cleans ingrained grease, if left on the surface for two or three hours and then remove with a cloth. Normal vinegar can be used for steam cleaning, leaving a refractory container within the oven and heating it to 200 ° C. The use of citric acid involves mixing it with a small amount of vinegar. The resulting solution should be treated with walls which pre-warmed to 100 ° C. Another component for the preparation of a cleaning paste is hydrogen peroxide, which is mixed with soda. The resulting formulation is applied to the wall at the 4 hour, then washed with sufficient water.
The most effective method is pyrolysis, which allows you to turn even the dirty surface in a new
What type of oven cleaning is best
The large number of ways to cleanse the oven puts the choice of which one is most effective. There is no single answer because every woman chooses way convenient for them. The only thing that can be noted: the least popular is the traditional method.
What better cleaning oven: catalytic or steam
This "duet" palm belongs to the catalytic method, as it allows the use of cope even with the stale fat, it does not require a significant investment of time or electric energy. Cleansing steam comfortable only in the presence of fresh grease to be cleaned quickly. But here comes to the aid of gentle household chemicals.
Inconvenience of pyrolysis can be considered as the need to remove all the extra fixings from the oven
What better cleaning of the oven: the catalytic or pyrolytic
Comparing these two methods, in which purification is done by temperature, it is in favor of pyrolysis, since this technology enables to completely clean the surface oven without human intervention. Even with strict requirements for safety and equipment, pyrolysis more effective method.
When you select the oven it is necessary to pay attention not only its appearance but also to learn about the method of cleaning
What better cleaning of the oven, according to experts
A large number of methods for the purification of the oven can result in confusion inexperienced hostess. Submitted video will allow more time to hear the opinion of experts, to determine for themselves, a method of producing a perfectly clean surface of the oven is the most effective and optimal.
