How to clean the pan with non-stick coating from the deposit inside?

How to clean the pan with non-stick coating from the deposit inside? At least once in my life, every housewife faced such a problem. In modern cooking it is very difficult to imagine cooking without using a frying pan, especially since today there are species much easier and more convenient than cast iron products. Teflon pans are treated with a special non-stick coating, so caring for the kitchen appliance is much easier. But, irrespective of the quality of the kitchen implements, in the process of exploitation, a coating of fat is formed on the surface, which, if untimely, becomes a hard-to-clean carbon deposit. Such a touch on the dishes not only spoils the taste of the dish, the condition of the vessel itself worsens at times. Increasingly, food begins to stick to the surface, the frying pan overgrows an unattractive loose fuming, which will soon make the kitchen object unusable. In this regard, there is a very urgent question, how to clean the non-stick frying pan from carbon at home. In this article we will tell you in detail all the secrets with which you can easily clean a pan with non-stick coating from carbon deposits, restore the brilliance and purity of an expensive assistant in a short time.

to the contents ↑

How to wash a Teflon pan using household chemicals?

Modern household chemicals perfectly copes with almost any dirt, and a greasy coating on a frying pan is no exception. In the department of household chemicals you can purchase the means by which the cleaning of teflon frying pans from carbon at home will be performed in a matter of minutes.

Liquid media

The simplest and most reliable option than removing carbon deposits from a non-stick frying pan is the use of liquid substances.

Important! In most cases, the fluids have a fairly aggressive composition that can adversely affect the skin of the hands, so wear protective gloves when handling.

Usage method:

1. Typically, the agent is applied to the surface and left for 20 minutes - during this time the active substances penetrate deep into the contamination and dissolve it.
2. In the end, wipe the surface with a sponge or a soft brush, rinse thoroughly with water.

Important! Before cleaning the pan with a non-stick coating from the coke on the outside, the dishes should be soaked in a sink with hot water for about 10 minutes. Thus, the deposit on the surface will soften, which will greatly facilitate the cleaning process.

Foam cleaning

Cleaners are also available as a foam. There is an opinion that such cleaning fluids do better with carbon on Teflon instruments, but it can be verified only by experiment.

How to use:

1. Slightly mix with water and beat until thick foam is obtained.
2. Apply the foam to the contaminated area, leave the product for 15 minutes.
3. In the end, rinse the dishes with water and rub the frying pan with a sponge.

Sprays

Some well-known manufacturers of cleaning products offer their products in the form of a spray. This option of chemistry can be considered the most economical, because how to apply funds should be very little.

How to use:

1. Apply spray to the burnt pan and leave for a while.
2. In the end, rinse the dishes under running water.

Important! The product is suitable for use on a surface with a weak deposit.

Gels and creams

The products in the form of a gel or cream are the most concentrated, so it is easy to clean the strongest deposit on the Teflon surface.

How to use:

1. It is enough to apply a small amount of gel to the surface, leave for 1 hour.
2. After the time has elapsed, remove the debris from the sponge, rinse the kitchen equipment under running water.

to the contents ↑

How to clean non-strong dirt?

Naturally, in order not to face the problem of how to clean a pan with non-stick coating, it is advisable to wash it after each cooking. To do this, apply a little detergent on the sponge and wipe it with a frying pan outside and inside. But there is not always the opportunity to wash the dishes in time, especially when preparing breakfast for the family, where every minute counts. There are several simple ways to clean the pan with non-stick coating from the deposit inside.

Citric acid

White citric acid powder is used quite often when cleaning various kinds of contaminants, not only on hard surfaces, but also on fabrics. In the fight with carbon in the frying pan, it can also help.

How to use:

1. Pour a full pan of water, add 1 bag of citric acid.
2. Put the vessel on fire, bring the liquid to a boil.
3. Leave the liquid in the container until it is completely cool.
4. In the end, rinse the remains of burnt under water.

Important! As an alternative to citric acid, you can use baking soda, dishwashing detergent, baking powder.

Green apple

Not too stiff nagar can be easily cleaned with a green sour apple.

How to use:

1. Cut the apple in half, cut the flesh with a knife.
2. Half the apple, rub the dirty dishes. Sour juice, which lets an apple, will clean the deposit.
3. Leave the cooked frying pan for 30-40 minutes.
4. In the end, rinse under running water.

to the table of contents ↑

How do I clean a frying pan from old fat?

It also happens that it is not possible to clean the pan every day, after which the inner and outer parts of the dishes are covered with a brown glow. It is not very easy to clean such dirt. To combat such mud, stronger means should be used.

Important! Remember that Teflon dishes should never be rubbed with scouring powders and scrapers. The coating is tender enough, it is easy to damage. Due to such actions, food can burn.

Applying Coca-Cola

Many of us love this drink, but very few people know that it can dissolve hard-to-remove contaminants on various surfaces. How to wash a pan with a non-stick coating from the carbon inside the "Coca-Cola"?

How to use:

1. Pour a drink into the dishes.
2. Put on a fire and bring to a boil.
3. Allow liquid to pour for 5-7 minutes, then leave to cool.
4. At the end, wash with dishwashing liquid and rinse with clean water.

Important! After such a procedure, the most complex and old deposits on the surface exfoliate from the walls of the vessel.

Nasal drip and drill

Medical preparations are also able to help remove old burns from the dishes. They cost inexpensively, so they do not have to worry about the substantial money spent due to such experiments.

Treatment:

1. In 250 ml of clean water, add 1 teaspoon of borax and ammonia.
2. Rub the non-stick frying pan with the resulting composition.
3. Leave the remedy until the grease on the surface begins to peel off.
4. Wash the device with dishwashing liquid, rinse thoroughly underwater.

Toothpaste

Want to know how to clean a pancake pan? Toothpaste not only perfectly whitens teeth and maintains the purity of the mouth, it can also be used as a means to combat fat on kitchen appliances.

How to use:

1. Inside the kitchen utensils, carefully grease with toothpaste.
2. Leave for a while until the plaque begins to lag behind the walls.
3. In the end of cleaning with a sponge, remove residues of grease and paste, rinse under running water.

Ethyl alcohol

Another effective way to remove old fat in a frying pan is to treat it with ethyl alcohol.

How to use:

1. The inside of the frying pan is treated with ethyl alcohol.
2. Leave the product on the surface before exfoliating the grease.
3. Rinse the remaining contamination under water.

to the contents ↑

How to clean a dirty frying pan?

In order to clean the frying pan, which is very much covered with fat, it will take a little more time and more cardinal means. Prepare a large bucket or a basin and water in advance.

Calcined soda

This tool has long been used for washing clothes and cleaning various kinds of contaminants. With old fat with its help you can also quickly cope. Moreover, there are several options for how to wash the carbon from a pan with a non-stick coating of soda ash.

Method # 1:

1. Put 5 liters of water in a bucket or a basin, add half the soda ash package and glue pack.
2. Put dirty dishes into the product.
3. Leave to sediment for one day.
4. In the end, wash with a detergent.

Method # 2:

1. Add water to the packaging of food or soda ash.
2. Add several packages of liquid glass to the product.
3. Place on the fire, place the device in the mixture and boil for 1.5 hours.
4. In the end of cleaning, rinse with dishwashing liquid.

Household soap

Household soap is an excellent assistant in removing greasy stains from clothes. With fat on the dishes it is also effective. You can apply it for these purposes in two ways.

Method number 1:

1. On a large grater, grind 2.5 pieces of laundry soap 72%.
2. In a deep container pour 5 liters of water, dissolve in it soap.
3. Add 2.5 packs of soda to the soapy water.
4. In the resulting product, put the kitchen equipment, put on a fire, boil for 2 hours.
5. At the end of boiling, the fat can easily be washed off with a dishwashing liquid.

Method No. 2:

1. Pour about 3 liters of water into the pan, add 1 piece of laundry soap and 100 g of clerical glue.
2. Place your device in the tool, boil for 2 hours.
3. Leave to cool, finish with a sponge.

Important! The scum that accumulates from the outside is cleaned with a sponge or brush. The outer side of the dishes does not have a thin special coating, so in this case the methods for cleaning cast-iron appliances will do.

to the contents ↑

Recommendations for the care of kitchen utensils

In order not to spend a lot of time and effort in cleaning the dishes in the future, you should always keep it clean. Here are some priceless tips that can save time and save your own strength for sometimes a difficult struggle with the old carbon:

• At the end of the meal do not be lazy, rinse not only cutlery, and pans and pans.
• Do not use strong detergents or a sponge to remove scale from the Teflon surface.
• The frying pan can be wiped with a lemon or a green apple - the acid contained in the fruit will easily remove mild fat deposits.
• If necessary - boil the inventory with the addition of soap and citric acid, the outside can be treated with special pastes.
• Inside, clean the appliance after each meal, clean only once a week from the outside.
• If you have a dishwasher, this will greatly facilitate the process of taking care of kitchen objects, it is enough to load a frying pan into the machine each time.
• After some time working with the device, pay attention to how quickly the scum on the Teflon coating is formed. If this occurs after each use, this means that the non-stick coating layer has been broken and it is desirable to replace the object.

For proper operation of Teflon kitchen appliances, it is necessary to clean them thoroughly from scale in time. Applying our recommendations, how to wash the fat from a pan with non-stick coating, your inventory will last you for many years, and will retain its brilliance and purity. In time, change the spoiled utensils, because a broken Teflon layer can be harmful to health.