How and what to clean iron at home: from popular recipes to professional solutions

Important rules for working with iron and prevention

As you know, it is much easier to cope with any difficulties when eradicating them in the "bud". In our case, it is sufficient to comply with the established rules of operation the manufacturer and periodic preventive maintenance.

Here are tips for working with iron that are absolutely to all models:

• Decide with temperature control that matches your dress (see the marks on the label). You should begin with the most undemanding to the "degrees" of things. Failure to do so may not only lead to surface contamination and deterioration of the performance of the iron, but also damage your favorite outfits.
• Any thing that you are going ironed, must always be clean, without any traces of dirt. Otherwise its particles adhered to the sole unit or even more permeated into the article of clothing.

• If your device is present, and a built-in atomizer vapor generation mode, need for effective functioning of filtered or distilled water. If you will fill in the reservoir ordinary water from the tap, with time on the outlets and the walls will form a scum.
• Avoid iron on various metal items of clothing - buttons, zippers, inlays, etc. It is fraught with a minimum of scratches on the surface of the product.
• Patting her clothes, not too lazy to wipe the base of household appliances with a towel soaked in water. Major pollution is not will remove, but with a few problem areas to cope with a bang.

• Many manufacturers equip their creations self-cleaning function. Do not neglect this advantage. Use this mode several times in the past month - and you can safely forget about the various contaminants.

Reminder: how to iron different types of fabrics

We do not just use the first rule specified temperature conditions. Compliance with this requirement is not only the surest means of pollution, but also serves as a prerequisite for the preservation of a presentable appearance of the clothes as long as possible.

Exclusively for you Edition Tehno. Guru gathered rules and values, the best options for different clothes.

Common "folk" methods of cleaning the iron

Even our grandparents thought about the solution of the question, "How and what to clean iron at home." The result of dealing with the problem is the emergence of more efficient and simple means to come to the aid of more than one decade.

NOTE!(Click to see)

Salt - cheap and cheerful

This substance is truly indispensable for family life. And in matters of purification of salt crystals sometimes does not yield the most potent methods. There are two popular method of cleaning the iron at home with the help of salt:

• In a paper or paperboard sheet are poured out a small amount of kitchen seasoning. Iron heated up to the average level of the base downwards and we place our "adaptation". Strongly pressing the device to the surface, do a few movements back and forth. Salt, being a good adsorbent absorbs any contamination.

• The folded two or three times a piece of gauze pour a handful of our assistants. Iron warms to the minimum value. Very carefully so as not to burn yourself, begin to wipe the surface of the sole.

Housekeeping tip!(Click to see)

Soda - one more budget "weapon" against dirt

Also, the problem of what to clear iron from scale, easily solves the baking soda or just soda. Using this method will give even more noticeable results. In addition to soda, you will need either water or thick detergent. You need to mix the two components in the tank to a state mushy paste. The resulting mixture was spread on an iron base. Wait five to ten minutes (depending on the degree of contamination). Then you can clean the soles, making a circular motion with a cloth, and then it is to remove the paste.

Soap - and clothes to wash, iron and clean the

Another good tool to clean the soot from the iron at home - a laundry soap. The procedure is very simple: heated to an average temperature sole instrument wipe bar of soap. Wait until complete cooling of the metal and get rid of the layer had settled impurities by rinsing the device under running water.

Citric acid - a preservative, health control, cleaner

Many housewives in the kitchen is definitely the bag with this natural cleaner. You do not know how to clean the iron scale in? Here is a practical recipe: Mix one teaspoon of dish acid and 200 ml of boiling water. Pour the resulting mixture into a reservoir for distilled liquids. Include the maximum heating mode. After a few minutes turn off the iron and go to the bathroom or kitchen. At least three times include stripping mode. Then clean the residues from the solution tank, pour pure water and repeat the procedure. The result will see.

Vinegar - caustic liquid in action

Unlike its competitors, this substance is capable to win and soot, and scale. First mix in the tank one part vinegar to one part water. To defeat the first "enemy" to wipe dipped in a solution with a cloth or gauze base (surface must be cold!). The second problem is eliminated by using a cotton swab with a solution which is necessary to process the inner container and iron yields.

Hydrogen peroxide or ammonia - when medicine helps in everyday life

If you have a first aid kit is a few old bubbles of hydrogen peroxide or ammonia, do not rush to throw them. Because the answer to the question: "How to clean the soleplate at home?". netrudoomkaya Procedure: To warm up the base of carefully processed by these medicines. After this procedure do not need to perform any additional steps.

Acetone - Cosmetics, too, to the rescue

Not finding anything suitable in the kitchen or medicine cabinet, resourceful hostess can look into your makeup bag. And if there will be at least a few drops of nail polish remover, you know, your iron is sparkling clean! As in the previous case, it is enough to clean only a small amount of acetone to wipe the lower surface of the iron. To get rid of the unpleasant odor technique rinse under running water.

Paraffin or wax - candle burning on the table, a candle burned ...

romance fans can use an unusual method of cleaning fouling of iron at home - a candle wax or paraffin. First, it cold grate sole. Immediately thereafter, you can remove this layer with a dry x / cotton fabric or paper. Best of all, this technique for getting rid of impurities in the initial stage.

Toothpaste - proven method of cleaning metal

Although initially this health facility was created for man, eventually he found a lot of additional applications. Metal surface iron it cleans as good as silverware or a family decoration of your ancestors. Squeeze the tube from a small amount of toothpaste, gently spread over the problem areas, and then strong movements remove it from the unit base. Just do not use when cleaning the habit toothbrush - bristles can leave small scratches.

Matchbox - the unconventional option

Yes, we are back to the kitchen to find any boxes of matches. Do not smile, even the people he has found application in cleaning. All that is required, - sulfuric label (located on both sides, about it you light a match). Gently but firmly rub its metal surface of the iron, and then remove any remaining particles of sulfur by any soft material.

Review of life hacking, how to clean the microwave.In a special publication of our portal, we describe in detail about how to clean the microwave traditional methods. You will learn the basic steps of cleaning, get acquainted with the most popular methods and features of cleaning, depending on the material of the inner chamber.

Specialized tools: the clean iron at home meticulous owners

Some hosts and hostesses so serious approach to the issue of cleanliness, that "people" even proven methods do not cause their complete trust. How to remove carbon deposits or scale with iron to such people? The best way out would be a hike in store household chemicals and purchase one of the proposed lower special tools.

"Descaling" - a real 'storm' lime deposits

Getting rid of the scale always takes much more time and effort than cleaning a metal iron base. Chemists, of course, long been aware of the problem. And gave the world such a wonderful substance, as "descaling". Correct use of the principle is as follows: in an inner section of distilled water is filled in a solution consisting of two tablespoons of drug and 200 ml of water. Heat the instrument to give maximum temperature and undergo a chemical reaction within half an hour. Re-start heating up to the highest point. Two or three times will activate the stripping mode. Then clean the container from contamination and solution residues.

«Cillit» - struggling with the remnants of rust and lime

This creation of the chemical industry is working in the same field as the previous nominee. But, unlike him, «Cillit» fights also against corrosion, which is inevitably exposed to virtually every model. Cleaning method goes as follows: heat the iron to the limit temperature, and then turn it off. Inverting device upside down. Was added to each of the special holes in the sole of a few drops of our assistant. After some time, rust particles will escape to the outside. Deleting, pour a small amount of water into the tank and start the stripping mode. According to the result, we have a clean and more powerful equipment.

Pencil for cleaning iron - simple, convenient and efficient

It remains to answer the question: "How do I clean the soleplate at home by special means?". And here comes into play the world-famous, but not so frequently used option - pencil for cleaning the surface. To use it, warm up the iron, immediately afterwards disconnected from the network. The base rub bought in the store with a pencil. Waiting for a few minutes and a lint free wipe any metallic material working zone. If you include a built-in steamer, you can also clean up and iron the opening weekend.

NOTE!(Click to see)

How to clean the soleplate with teflon or ceramic coating

Before turning to the results, it is necessary to identify a problematic segment as Teflon base. The peculiarity lies in the fact that this modification is very vulnerable to scratches and mechanical damage as such.

In this regard, the most effective purification methods will have the following options (listed in the article):

1. Acetone or nail polish remover.
2. Toothpaste (without the abrasive components).
3. Laundry soap.
4. Hydrogen peroxide or ammonia.
5. Acetic acid.
6. A special pencil for cleaning.

In order to prevent damage to the surface of the other recipes should be abandoned.

The final. The best means to combat pollution by Category

It is time to summarize all the information gathered and decide on the winners in the various "categories". edition Tehno. Guru It recommends first and foremost look at precisely these means and methods.

How to Clean iron from scale: Top 3 Best

How to Clean iron from scale: Top 3 Best

How to clean burnt iron from tissues: Top 3 Best