How to make a vase out of the bottle with his hands

You do not know what to do with an empty wine bottle? From it you can make an original vase! With this task cope even a person who knows nothing about decoupage. You will need a can of paint and a few sheets of tissue paper with an attractive pattern.

You will need

• Used wine bottle;
• a bucket of hot water;
• glass of soda;
• alcohol;
• 1 enamel paint cartridge;
• brush-sponge;
• colored sheets of tissue paper;
• gloves.

First will be removed from the bottle label. How?

• Type a bucket of hot water, add the soda cans. Place the bottle in the water. They have to fill with water. Leave the bottle in a bucket for 30 minutes;
• after half an hour, remove the dishes. Now swollen paper can be easily removed with a sharp object;
• Leave to dry clean the dishes. Then use a cloth moistened with alcohol to soak the surface. This measure will be good to go to the paint on the glass. Make sure that the bottle is completely cleared from the paper and glue.

Create a mini-studio for painting from a cardboard box

This action does not take much time.

• Take the box, put it on its side in the open state. Put a plate inside the disposable;
• Put the bottle top;
• how to shake the canister, and then begin to spray paint. Slowly unroll the disposable plates, so that all aspects of the future painted vases evenly;
• move the plate in place to dry dishes. Typically, to dry out for about a day, but the process may be slightly delayed. Especially, if the window is cold or damp;
• Repeat the process with the other bottles.

decoration

When this stage is complete, the real creativity begins. Next, you will glue the tissue paper. Stick to the recommendations.

• Take sheets of tissue paper of varying shapes and sizes;
• Think about how you would like to place the paper with pictures on the bottle, which use a combination of colors;
• if you decide to stick paper overlap, you can get a soft effect: the image will resemble a watercolor;
• take the first bite, brush bottle of glue in the right place;
• First glue the future vase only one edge of the paper and then glue it all. Smooth sheet adhered. Rep lagging edge;
• after the cover sheets glued with another layer of adhesive on top of the paper. Brush smooths wrinkles, if they were formed;
• attach the remaining pieces as you want;
• again put on the paper another layer of glue;
• Leave the vase to dry;
• You can additionally cover a bottle nacre. This can be done when the glue dries.