Kitchen sink: device types, sizes, installation, model

In order to make the right choice in favor of one of the sinks for the kitchen, you should take into account such parameters as the General area of ​​the room and available room style. used headset also plays an important role. The basic requirements will always treat an increased level of comfort, functionality and quality of the used products. So what should be a sink for the kitchen? If the sink was made of high quality materials, the sharp temperature drops it will not be afraid, as the aggressive agents that are used for washing dishes. For such designs easy to care for, which will allow her to serve more than one decade. The choice of high-quality products and dedicated to our review.

The device current sink for the kitchen

Sink Kitchen should be chosen wisely, because this choice will depend the comfort of use and cooking in general. Selecting the size should depend directly on the number of family members and the frequency of use of the premises as a kitchen. In the presence of the combined shell type may combine several forms simultaneously. If the family consists of a number of people, enough is to buy a small round or angular shell. Modern materials allow to produce multifunctional sink for the kitchen, which would be able to respond to all the tasks.

Based on the methods of carrying out installation works are distinguished:

• integrated structure;
• Overhead sinks;
• Shell bite type.

Say with certainty whether or not comfortable to use single-level or multi-level kitchen sink and what better it is impossible, but in this case it is recommended to give preference to solid construction, which perfectly fit into the already available interior.

Siphon for sink in the kitchen

Feature siphon It lies in its design features, and more precisely in the presence of a particular bend. Do all the water out of it does not go away, because a small amount of constantly delayed at this point in the pipe, which acts as a sump. Siphon prevents odors in the room, hovering in the sewer pipe. Such devices are equipped with almost all modern sinks and sinks, so if the original set does not exist, should take care of its speedy installation. Such manipulations will not take a lot of time, with all the work you can do yourself.

Apparatus siphon for washbasin in the kitchen have the basic set:

• lower and upper tube;
• the body itself;
• plate to drain;
• pipe;
• rubber gaskets;
• a screw that is used to screed;
• set of plastic nuts;
• rubber and plastic cuffs;
• cork rubber.

Frequently used for producing propylene, polyethylene or a plastic. Such material does not rot or corrode, to the same period of wear is very high. Most people prefer to install the brass or bronze pipes, which have a significant disadvantage - over time their surface is oxidized, which leads to accumulation of dirt.

Perform a self-install the siphon should not cause any difficulties, because such work is able to carry out even the novice master. Despite this for such work should be taken very seriously. Even a small slack can lead to not very pleasant consequences, such as the occurrence of unpleasant flavor and extraneous noise. For information on how to assemble the siphon for the sink in the kitchen, take a look at the video below:

Related article:

Siphon for sink in the kitchen. In the paper, we consider what kinds of siphons are, what they are made, the operating principle, to it is necessary to pay attention to when choosing the major manufacturers, installation and useful nuances advice.

Installing additional components

To begin, all elements must be checked for their integrity and tightness. All connections must be in place, and rubber gaskets meet a certain quality. If the kit is sold in assembled form, it should be disassembled before you buy and reassemble the siphon in the presence of the seller, in order to ensure its integrity and reliability.

You should also check for the presence of components of burrs, cracks, chips, and other visual defects that may affect the future operation of the equipment. Included should be a guide, which will help to hold the assembly. However, even if there is no instrument to collect yourself is more than real. You must adhere to the following instructions:

• Devices such as the siphon, which is planned to be used in the kitchen, it is best to gather yourself. This will not only improve the quality of the original device (strengthen clips available), but also understand the principle of its operation, which will carry out small repairs in case needed. The integrity of the thread should be given special attention.
• Before tightening the components should be installed all rubber gaskets. it is recommended to use a sealant for additional fixation.
• Ability to self-regulation of the height of the nozzle that connects the glass and the sink. To do this, you must slightly change the position of the sealing gasket.
• All nuts should be tightened as much as possible, but also you should not overdo it.
• After completion of the work carefully removed the excess sealant.

When it comes to installing a new siphon the old shell, it should be to dismantle the old equipment to start. After that, the shell surface is cleaned in a place where previously carried mount. Rust and dirt must be completely removed.

Important! It should be noted that, when carrying out the necessary installation work sewer hole will remain open. To avoid such a propagation characteristic smell, use of such a temporary structure, like a cork, which can be made from tightly woven graft.

In most cases, the basic equipment has included a lattice filter. Then to start fastened to the lattice using the special bolt, and only then is merged to the drain device. It is recommended to use a corrugated pipe for proper installation of the siphon under the sink pipe connections to a sewer. Such withdrawal will perform flexible connection of any complexity, regardless of where and at what angle a drain hole.

If the drain hole has a large diameter, it is recommended to use an additional rubber lining or plastic adapter. After leak checks, this opens crane with water at some time.

drain device for the kitchen sink

On the housing side has one more opening, which is intended to connect the connecting pipe. By species established tubes It will depend on the complexity of the subsequent assembly work. Extra padding and fitting need for smooth assembly pipeWho understand several parts. In any case, they are made with a small margin length, which allows you to set a plum under the sink in the kitchen easily.

To trim the excess material can be used grinders or hacksaw. Most elements have a special connection design that allows to independently regulate the distance between the connecting nodes.

Drain for kitchen sinks, which are used for mounting the corrugated pipe, to carry out a little bit easier. The additional trimming they do not need, and should not be fixed length, since the pipe is a bellows. Before the final selection should take into account the fact that the corrugated pipe quickly become clogged, particularly with regard to food.

For compounds of the siphon tube is used and the gasket and fitting for connection to a sewer pipe need several spacers - adapters. To begin, it is placed in the hole itself, after which the inner diameter of the connection tube already selected.

Note! In order to make it easier to introduce the tube, its edges are recommended to dip into the soapy solution or grate dishwashing liquid.

Chopper for kitchen sink

The device, which is installed as optional equipment that is responsible for grinding and removal of small food waste is called dispouzerom. Shredders installed in the kitchen sink that allows the device to guide the already shredded waste directly into the sewer pipe. After start it produces cold water for shredding appliance activated, whereupon it gradually placed designed for crushing waste. To completely remove the residue that may have collected in the pipes, it is recommended to leave open the valve for another half a minute.

Note! Such a device as dispouzer, operate without water can not. The liquid facilitates pushing the waste that is planned to dispose of. Water also helps to mitigate the operation of the device and prevents the characteristic smells in the kitchen.

In this case, the device is mounted in place of the siphon that allows for connection to a drain, a diameter of 9 cm. If this value is not standard, you need to manually select the auxiliary adapters. Buy a shredder for the kitchen sink is not difficult, and design in the base do not hit hard on the family budget. And here it is recommended to determine the model beforehand. Otherwise, you may become a victim of an experienced salesman who advise not what you need.

Other items for the kitchen sink

About the basic elements that are part of the basic equipment for the kitchen sink, we've talked, and now it's time to consider additional or other elements for the sink. If there is no need to establish a qualitative dispouzera net sink in the kitchen. It will delay garbage and other waste, preventing them from falling into the trap.

In addition it is worth paying attention to the more durable and improved models for a tap in the kitchen sink. They help adjust the water pressure is weak in the case of accommodation in the area often occur disruptions with the purification devices. Too weak pressure and the apartment, which is located on the upper floors, does not have to indicate the lack of opportunities normally to wash the dishes.

To solve such common tasks required to install an additional pump for the sink in the kitchen. Here we should pay attention to the model, work is impossible under reduced pressure of water. Their installation is only absolutely necessary, therefore, such decisions should be taken on the basis of their own personal experience and the current situation.

Important! It should be noted that, for the installation of auxiliary members do not need to resort to search professionals how to perform such work on their own by simply following the attached instructions.

Types of kitchen sink

Modern kitchen can become a benchmark for technological progress. Pride of place will always hold fridge, plate and sink. That is why the choice of each of these basic elements should be approached with particular attention, moreover, they must integrate harmoniously with the already available interior in case of replacement. In order to make the right choice in favor of one or another kind sinks for the kitchen, should be read in more detail with its main varieties.

overhead sinks

Waybill sink for the kitchen got its name due to the method of installation. Often, this type of sink is installed on top of existing tables, which is used instead of countertops. When this is used as a cabinet itself, and set her washing, and therefore it is an integral part kitchen interior. Each cabinet has a few special ledges that allow you to install any shell easily. In addition, one of the edges slightly raised, thus avoiding the water on floor surface and preserving a small distance between the sink and the wall. Most often, the overhead shells have smooth edges and a rectangular shape.

The new models are equipped with both a few bowls of various sizes, one of which is considered the main and the second optional. To connect them to do special countertops. The first is used exclusively for wet dishes and of washed products having embossed. To avoid water overflow wall has a side opening that is in the process of installation works connected to the main drain.

Together with the cup is recommended to install the mesh, which will not allow large pieces of food fall into pipe. Also it can be used as a plug, but it should not install the mesh, and the plug. The cabinet itself can put a large trash bin, floor pan or bucket. The front portion closes the door for the manufacture of any material which can be used.

Inset into the countertop sink

Tapping into the sink countertop for the kitchen look more aesthetically pleasing, but not immediately draw attention to the fact that their installation requires certain skills and tools. From overhead structure they differ in that they have bumpers at the same level. But to achieve this result, you must first prepare the surface countertops:

1. To begin with holes are cut and then processed.
2. Along the edges of the groove is made, the exact size of which can be found out, turning and putting a sink.
3. According to the defined contours it is a neat incision, while chipping best avoided. Contour cut using elektrostameski or mill.
4. After installing the sink.
5. The resulting joints should be sealed thoroughly. It is recommended before installing the cover edge cleaning sealant. To fix the special mounting needed, are included in the kit. The remnants of sealant and gaskets are removed with a sharp knife.

When installing the sink under the countertop to cope on their own is not possible. For fixing the necessary equipment, a set of brackets for mounting which additional dowels and screws are used. They do not need when it comes to solid wood, MDF or Particleboard. Self-opening can not be cut if the design has been made of natural or artificial stone.

When sawing observe incredible accuracy, because the difference at millimeter can further affect the quality of the equipment. When using artificial wood surface is covered with waterproof filmWhich will protect the material from splashing. Such manipulation is difficult prodelyvat even in factory conditions.

recessed sinks

For the manufacture of embedded sinks for the kitchen often uses glass. I would like just to draw attention to the fact that this applies to a special durable and tempered glass. Such devices are capable of becoming individual decorative elements in modern interiorTherefore enjoys considerable demand among people with boundless imagination. This design will always look very elegant, and the material used can be painted in different colors and have a wide variety of forms. The applied material may be colored and glossy surface, matte or corrugated.

Important! It is worth paying attention to the fact that tap water is quite hard, moreover, it contains a number of specific impurities. By using a transparent or glossy surfaces do not prevent the formation of white streaks. In this case, it is worth considering the installation of corrugated or opaque bowls for the kitchen, followed by a little bit easier to care for.

Such constructions, consisting of natural stone, can give elegance to any room, however, the cost is quite substantial. Before you make a final choice, we should also pay attention to the fact that the sink in natural stone will have a lot of weight and it requires a very specific care. Stone does not react to an acidic environment, and some of its variants also are able to absorb the flavors.

Also pay attention to the products of artificial stone, which appeared relatively recently. Outwardly, they practically do not differ from natural analogues. In the manufacture of crumb used natural and resins, which act as binder. their cost many times less, and they are perfectly transfer exposure to chemicals and resistant to mechanical damage. On metal products any scratch will be immediately noticeable, and embedded acrylic shells are not much different from the porcelain.

Photo corner sinks for the kitchen

Find the perfect shell is quite difficult for the kitchen, because the range of advanced products capable of hitting each. To begin with such devices must be roomy, we are talking about the need to wash the pan deep and not too tiny pans. The material used for their manufacture, must be tolerant of the aggressive environment, which will always be present various detergents and hot water. In addition, it must maintain a neat appearance with minimal effort.

Corner sink in the kitchen bought only after the single was determined interior style. If we are talking about a small-sized indoor units, it is often given preference to the design of corners which are quite tiny and at the same time roomy.

Due to the specific design can be placed anywhere, which makes it possible to save storage space. You can choose the model that will be equipped with several bowls arranged at a slight angle on the same level. Corner sink in the kitchen can not only wash the vegetables, but also soak the dishes. Make it too deep it makes no sense, because then it is necessary often to stoop too low, that would not be quite convenient. Too shallow bowl will only be effective if installed in the kitchen dishwasher.

Basic dimensions for kitchen sinks

Often the shape and size standard. Great demand model, square, rectangular and round shapes. Much less purchased washing oval or semi-circular shape, as a huge amount of free space required for them. Otherwise, they will not look at the crowd.

The most common sizes:

Dimensions corner sink should depend on the general parameters of the furniture in the room and the size most kitchens.

When choosing to be guided by these rules:

• The distance between the countertop and the sink edge should be at least 50 mm, otherwise the water would spray all over the place, including on clothing. Too great a distance as not to give the necessary amenities.
• Between wardrobe and the rim should remain a distance of at least 50 mm (if the module width 60 cm, the figure should be no more than 55 cm, excluding wings).

Note! In this round the sink can be installed in virtually any module. The main condition is: the facade of the countertop overhang should form a small shed in the 5-10 cm, otherwise water will spray on the floor and clothes.

Unusual combination sink with furniture

Sink for the kitchen, built-in countertop, different variety of shapes and designs, as well as the materials used for its production. That is why to choose the most optimal design solution is not difficult. Flush kitchen sink on the market today is quite multi-functional, and at the same time a universal product. The most common modifications include:

• sink equipped several or only one wingWhich is used for temporary storage of a soap solution and washed ware;
• staffed several bowlsThat can be used to wash fruit and separately for kitchen utensils;
• sink, equipped with only one sinkWhich may have the most bizarre form.

The location should be easily accessible and does not occupy a large space. Kitchen sink with a pedestal can be installed in a corner, which will significantly save valuable space. In this case, the furniture will be arranged in a "T" letter. If there is enough space, the sink can be a separate part of the kitchen units, worktops and located next to help in the speedy cooking. Cupboard under the sink in the kitchen should be in harmony with the overall style of the room.

What materials are used for the manufacture of shells

So what are the sinks for the kitchen? Manufacturers offer products of a rectangular, round, square and oval. If there is a small room, you can always use the compact angular model, which also are more than spacious. Washing must fulfill its function, because sometimes it is necessary to wash the trays, which are much more than the usual dishes. Spacious bowl is required, if the family consists of three or more people. In this case, it will be possible at the same time to wash large amounts of dirty dishes. The optimum depth index ranges from 15 to 19 cm.

Kitchen sink made of artificial stone: photo examples, pros and cons

A material such as an artificial stone, is characterized as environmentally friendly, reliable, durable and unique by nature raw materials that are used for the manufacture of many of today's products. the kitchen sink made of artificial stone will allow to give an existing interior some color. In the production of similar products based on use inherent order of 20% pure material as which often acts as granite, the remaining 80% represent different polymer binders basis. The service life of these products is calculated for decades, which is a good indicator.

The surface of the material does not absorb moisture, dyes and dirt, making it practical. Often the artificial stone used for the manufacture of countertops and sinks. Sink for the kitchen made of artificial stone it can be made to order, which will give the article of any shape and size that will fit perfectly in interior. Stone sink in the kitchen will always look rich and relevant. The disadvantage is the cost, which can be a significant blow to the family budget.

Shells of ceramic and sanitary ware: photo examples, advantages and disadvantages

Ceramic sink for the kitchen will always look original thanks to an interesting design. You can find models made country style or more advanced models. The choice should be based on layout and dimensions are made out of the room. Round ceramic sink will naturally look in a small kitchen. You can always purchase a product with an additional tier that will be dried fruit or clean dishes, and which is pushed if necessary. Some designs are equipped with grinders, which if desired can be set independently.

The maintenance is simple ceramics, and the upper layer is practical though not resistant to various mechanical damage. Detergents are also not afraid of her. Manufacturers use different materials, which affects the fundamental characteristics of the products. In the formation of small chips or cracks it is recommended not to waste efforts on the restoration, which came to nothing lead. If the crack is already happy, product life is over. Quietly transferred to high temperature fluctuations.

Sinks for the kitchen made of stainless steel: photo examples, an overview of benefits

One of the most common materials used for the production of kitchen accessories, is stainless steel or stainless steel. Stainless Steel Sinks Kitchen are the best option at a ratio of such parameters as price - quality. Unfortunately, over the years, such as quality indicator suffered greatly because most manufacturers aiming reduce production costs, began to use various additives, which greatly affected the quality of products. The cost is really high-quality products will be sky-high, as will be composed of elements such as nickel and chromium. They are able to impart gloss to any product, while protecting the underlying structure against possible corrosion.

Considerable demand for high-quality stainless steel sinks embedded kitchen. The disadvantages are the substantial noise. This problem can be solved by buying products with thicker walls or special sound-absorbing coating. In any case, wash kitchen with stainless steel are the ideal addition to any interior. Check the quality is not difficult. Enough to bring a magnet that will not stick to the surface.

Prices, where to buy a sink for the kitchen, Manufacturer

Before you purchase a car wash for the kitchen, it is recommended to determine the model. Buy a sink for the kitchen can be, and the nearest supermarket, but whether it will meet all the requirements and objectives? What type of product is preferable: integrated or mortise?

Steel structures must have a special quality certificate, which will confirm the corresponding figure. From this figure will depend on the life of the product. Steel structures found most hygienic and relatively affordable. In addition, they are able to complement any interior.

Buy the sink in the kitchen can be inexpensively and through various online stores that do not rarely satisfied with a pleasant stock. The cost is really high-quality product ranges from 130 to 210 $. Experience has shown that products which are more wear margin only for the brand.

Granite sinks also enjoyed considerable demand, despite significant weight. For manufacturing has long been used solid blocks. They were replaced by cheaper granite crumb and strong binders. From this, they have not lost their strength, but at the cost of this was reflected in a better way. However, they remain the same beautiful, durable and extremely practical. When choosing products should give preference to products from Turkey, Holland, Germany and Italy. Sink for kitchen shop, will pick up exactly what you need at the most affordable price.

Particular attention should be given to products from manufacturers such as:

Picture	brand name
	Longran
	Teka
	Reginox
	Smeg
	Foster
	Franke
	Florentina
	Alveus
	Villeroy & Boch
	Blanco
	Schock
	Polygran
	Ukinox

Sink in kitchen design: Photo of successful solutions

Double sinks for the kitchen often used in industrial applications where there is a need for a phased response. Also, the design makes it possible to share dishes clean in two stages: a separate washing and rinsing. The main objective of most manufacturers is the maximum simplification of the required tasks with which housewives face daily. Main advantages:

• The effectiveness of the organization of work.
• Compactness.
• Saving. Water consumption is considerably reduced, since the beginning of the dialed only one vessel designed to remove food residues, while the second is used for rinsing.
• Increased functionality. One container can function not depending on another. The first may be to soak the plates, and the second to wash fruit.
• The ability to use a variety of designs.

It is the representatives of Western countries became original innovators, start the installation in the kitchen sink window. Even if you have a dishwasher, many housewives prefer to carry out the work in such a sink, opening enjoying the scenery and birds singing. Natural lighting is also more than not will, and effective area increase significantly with the right design of the sill. We are also under windows batteries, And the transfer of communication - the process is quite complicated, and that brings such a great solution to nothing.

Disadvantages of this arrangement:

• difficulties that may arise during the transfer of communications;
• constant drops on the window, which will undoubtedly bring inconvenience;
• incorrectly picked sink not allow you to open the window, which greatly complicate the possibility of airing the room;
• transfer batteriesWhich require a change in layout and special permission;
• place the dryer on a familiar place will not work, because there is already a window.

Advantages of installation under the window cleaning:

• the ability to install a wide worktop;
• possibility of saving space;
• the availability of natural lighting;
• nice design.

Sinks for the kitchen or enameled steel are considered to be an attribute of a bygone era, so to find really high-quality headset is quite difficult. However, some prefer the old days and the familiar shell with shiny and smooth sides. Such pleasant to the touch surface can boast not only steel and enameled designs, but also pottery. Metal devices also have a number of undeniable advantages, such as:

• resistance to temperature extremes;
• a high level of durability of the product;
• variety of forms and designs;
• affordable price;
• light weight.

Disadvantages:

• Steel articles are enamelled coating, which can not be called solid;
• in use there is very characteristic and is strong enough noise accompaniment.

This attribute for a kitchen sink is black, can be an excellent course designer in the design of a kitchen in a modern style. In this case, it is not necessary to acquire all the black furniture, as this tone is perfectly combined with many others, including bright colors. Such elements are often used in the design of the room in high-tech style. But you should pay attention to the fact that even a small scratch will look terrible on a black surface. Any contamination will be visible immediately, with washed it very convenient. In addition to practical functions, sink black kitchen can be a key element, drawing admiring glances guests.

Step by step installation instructions in the kitchen sink

In carrying out the necessary installation work should follow these basic rules and guidelines:

• Setting the kitchen sink should be carried out on the principle of the golden triangle. Therefore, washing and cabinets for them should not be installed in close proximity to the refrigerator or oven.
• The sink is located exclusively in the work area.
• One part is to be used solely for serving and cooking, while the second is for cleaning and washing dishes.

All sinks are connected to both the water and sewer systems, so mounted on the same side where the wall is located adjacent to the bathroom. The use of modern materials and technologies allow to make installation in any other place.

Important! The optimum thickness of an indicator mark in the table top is 380 mm. It will be both durable and strong enough.

What tools are needed:

Illustration	Tool
	Sealant based on silicone
	compactor
	Square, pencil and ruler
	Pliers
	several screwdrivers
	Drill
	Electric drill
	fretsaw

Let's look at step by step how to install the sink in the kitchen worktop:

1. The template is placed on the table or a special module that involves the use of tie elements. For additional fixing tape is used, thus it is necessary to exclude any contact spacers with internal elements.
2. Features future location designation washing directly on countertop surface. It should be considered the optimal distance between the edges to ensure that there was a lot of splashing. The contour is shaped with an inverted shell. The difference with the working circuit will be only 15 mm.
3. According to the circuit perimeter to make small holes using a drill, and only then sawed the entire perimeter.
4. The surface is cleaned of debris formed, and the edges are stripped sandpaper.
5. To Install washing and checked the operation of hoses and mixers. After that, install the sink in the kitchen is very difficult.
6. All edges are processed with the help of a sealant. This will prevent the ingress of moisture.
7. On the cutting tape is laid, which is attached. If not, use the sealant.
8. So how to fix the sink on a pedestal in the kitchen should be the most dense, then press should start with the edges. Mounts should start using the bottom, gradually pulling the sink to countertop. After protracted middle screws. The remnants of sealant should be removed with a sharp object.
9. A connection to the sewer pipe. You will need a siphon. If it is not complete, it is necessary to take care of buying it in advance.
10. After check all components for tightness.

The main problems of modern sinks

Most housewives are trying to do everything possible in order to avoid blockage in the sink, which is often accompanied by a not very pleasant smell. The first set mesh, which can not completely eliminate such a problem in the future, since it is easy enough to shift the power shower. So what needs to be done in order to avoid problems in the future? And whether the blockage only possible problem?

Problem №1 - SMELL

So how to remove the smell from the sink in the kitchen is quite difficult, it is necessary to do everything necessary in order to avoid similar. This primarily occurs due to the fact that the water seal has become defective. If the bottom of the fluid accumulates, it ceases to perform its functions. Incorrect installation of the internal tube of the siphon is also possible, which in any case should not touch the bottom.

Pipes with time may also be deformed. If a long time not to use the sink, the water in the knee and evaporate the water seal cease to function. That is why the smell from the sink in the kitchen sewerage. Many experts say that because to remove the smell from the sink in the kitchen and can be improvised means, then all the better to prefer cooking soda. The use of other compounds that are able to sanitize siphon and drain.

Problem №2 - clogged

Clogged sink in the kitchen: how to clean? That is the question asked by people who have not thought about what to do with leftover food from a bowl. To eliminate such problems, you should use such substances that are not considered harmful to the individual components of the device. First of all, clogged sink due to the enormous amount of fat, in which case you can use the hot water, but only if the tube is not plastic.

Vacuums with reverse traction function is also able to help, but at the same time clean the pipe, he can not. Blockages in the kitchen sink can be eliminated by using a solution based on soda and salt, which is poured into the sink.

Clogged sink in the kitchen. What to do? In such rules should be followed to avoid such situations:

Illyustatsiya	Advice
	Large food residues should be disposed of in a special bucket and only then proceed to wash dishes.
	Partially prevent large particles in the trap help stationary grid.
	Used oil to be drained to the toilet, not in the sink.

Problem №3 - gurgling

Many wonder why gurgles in the sink in the kitchen from time to time? The reason often are all the same blockages. To delete them, it turns out the original cause of the obstruction, and then use the most appropriate method for its speedy and complete elimination. If the situation is complicated, the machine is completely disassembled and breakage is eliminated by hand.

If there have been irregularities in the air duct, The gurgling sound may also appear from time to time. This is due to the formation of the ice masses, which are removed by using hot water well, but not boiling water. Possible to use a special solvent, but it is based should include only those components that are not able to harm the individual component parts of the device. In this case, the need to freeze the pipe insulation.

conclusion

A huge range of modern sinks for the kitchen can lead to baffled everyone. In order to avoid incorrect selection achievements, determine the model before going to the store. Otherwise, you can buy off-the device that would be the most optimal and at the same time organically would fit into the existing kitchen environment. To buy quality equipment really does not need a significant investment, because you can buy functional and practical model is made of a material available from the manufacturer, which is not known to market today. Before buying you should pay attention to such factors as:

Photo	Indicator
	Resistance to mechanical damage
	temperature changes
	The base material from which the product is made
	its dimensions
	Useful life