As the phone is connected to a TV: classification of the main technologies of data transmission

click fraud protection

Connecting your phone to a TV using a cable

CONTENT

  • 1 Can I phone to connect to your TV
  • 2 Wired technology
  • 3 Wireless technology
  • 4 How can I connect my phone to the old TV
  • 5 How to control your TV from your smartphone

Can I phone to connect to your TV

Sophisticated users know a lot of ways to connect the phone to the television receiver. Used for this purpose as a wired (USB, HDMI, etc.), And wireless (Wi-Fi, etc.) Technology. Connect the smartphone to the TV is not too difficult, but it is necessary that such a possibility was laid in a TV receiver, and the smartphone. Below, we will discuss how you can connect the phone to a TV.

Wireless phone connection to a TV

As the phone is connected to a TV - a review of the main waysHow to connect a laptop to TV and why is it necessary.In a special publication of our portal, we describe in detail how to connect your laptop to your TV. You will learn about the types of compounds which settings you need to set, depending on the operating system PC.

Wired technology

Print the image from your phone to the TV receiver is possible, using technology, providing a compound corresponding connector (port) which are equipped with both devices at cable support. the connection method is determined by the user depending on what connectors are equipped with devices owned by him and which connecting cable are at it "at hand". Most often this is done using USB and HDMI-connection, however, there are other options.

In general, the phone connection to the television receiver in the following order:

  1. Turn off both devices. Television and it is recommended to disconnect from the mains.
  2. Connecting cable ends connected to the respective connectors of each device.
  3. They include a TV receiver and a telephone.
  4. If necessary, a device configuration in accordance with their instructions for use.

IMPORTANT!(Click to see)

IMPORTANT!

Cables to connect any output connectors of the phone and the television is allowed only if both devices are turned off.

The advantage of wire connection - a large data rate and absence of "hang" video.

Disadvantage - phone bind to the television receiver in the connection cable.

How to connect your phone to your TV via USB

Using the USB-connection - this is one of the most common ways to connect your phone to your TV. This is due to the fact that the USB-interface is integrated at present in almost all models of modern digital devices. Thus one of the side or end surfaces of the phone body present micro-USB connector, a television equipped with a standard USB connector.

Micro-USB connector equipped with almost all modern phones

In order to connect the phone to a TV, use the micro-USB-> USB cable.

Using this cable, you can watch on the big screen files saved in the phone

In addition, the need to install on devices corresponding modes.

Devicetype of connectormode
TV receiverUSBUSB
Phone (smartphone)micro-USBStorage device


ATTENTION!(Click to see)

ATTENTION!

Connection via USB-connection allows you to use your phone as a storage device (flash drive) and It makes it possible to view on the TV screen only those files that are loaded into memory phone. Print the image on the TV screen directly from the phone's display is not possible.

How to connect your phone to your TV via HDMI

Unlike USB-connection, use HDMI-technology allows you to duplicate the image on the TV screen directly from your phone. This provides high image quality and data rate in a digital format.

Data transfer is implemented in such a way today in all modern TVs. It is also necessary, so that the phone had a micro-HDMI connector.

Detect HDMI connector in the phone is not easy

The compound is generally performed via cable HDMI micro-HDMI.

Without this cable duplicate images on a TV screen can not be

When connecting the cable and switching devices need to go to the television menu and set as the HDMI source. The phone has all the settings are made automatically.

If the image on the TV screen, the phone will have to be adjusted manually. For this:

  • in the settings, select HDMI mode;
  • We find HDMI-format;
  • select resolution settings and refresh rates that are supported by your TV.

In this setup is finished, and the television receiver must play the audio and video from your phone.

ATTENTION!(Click to see)

ATTENTION!

If the micro-HDMI connector is not in the phone, you can use a special adapter converter micro-USB - HDMI, which converts and prepares the signal for transmission to TV mode HDMI. Television receiver while connected to the converter ordinary USB-cable.

With this converter at no HDMI connector on the phone, you can not ignore

MHL technology and SlimPort

HDMI technology (High Definition Multimedia Interface) - This is almost the first standard, will allow for the connection of the smartphone to the big screen television sets (monitors). Moreover, its developers, including companies such as Philips, Hitachi and the Sony, initially (in 2002) did not expect to use your phone as a source of transmission of video to the TV. To this came only after the mass distribution of smartphones. Therefore, there were type connectors micro-HDMI and mini-HDMI. The main disadvantage HDMI technology is considered the need to provide additional smart phone connector, which increases the thickness and weight of the phone. It managed to eliminate it in the process of developing the standard MHL (Mobile High-Definition Link), which brought together the functionality of interface micro-USB and HDMI. At the same USB technology allows you to charge your smartphone battery, and HDMI - to transmit high quality signal (video + audio). To connect to a TV at the same time you need to use an adapter converter of one of two types:

  • Type I (passive) - micro-USB-> HDMI c complementary connector micro-USB, for connecting the external power supply;

One of the most popular adapters for connection of modern smartphones to your TV

  • Type II (active) - micro-USB-> HDMI, in which your phone's battery is being charged via an HDMI cable.

IMPORTANT!(Click to see)

IMPORTANT!

TVs that support this type of adapter, now rare.

Another technology developed as an alternative to HDMI - Standard Slim Port. Its working principle is virtually identical to the MHL technology. It uses superficially similar adapters that connect to the connectors micro-USB and HDMI.

Important! Despite the apparent similarities, adapters MHL standards and Slim Port incompatible with each other

Slim Port Standard, in addition, allows you to connect your phone to the big screen TV or computer monitor using the VGA standard. To do this, use the appropriate adapter.

This adapter will connect to smart TVs with D-sub connector

From the standard MHL Slim Port technology is characterized by the absence of patent liability in relation to the HDMI. Slim Port Technology is extremely rare and is only implemented in the last line of smartphones and tablets brand Nexus.

ATTENTION!(Click to see)

ATTENTION!

How to connect the phones that implement MHL and Slim Port technology to TVs with HDMI connector is identical to connect your phone to the USB port and HDMI.

Wireless technology

Recently, almost all well-known manufacturers of telephones and televisions have started to get rid of wires when connecting external devices, and use of this wireless technology. One of the best known and most common technologies - Wi-Fi.

In general, a wireless telephone connection to the TV in the following order:

  • in the tab "Wireless Networks" smartphone find the desired application and activate it;
  • select "Network" section and activate a similar application in the TV menu. If such a clause is not there, it means that TV does not support the activated phone technology, and the connection is not to be;
  • after the activation of the application on both devices on the TV screen will be able to select the phone to connect. You need to select the model of your smartphone and confirm by pressing "Yes".

If done correctly, the screen will display an image from your phone.

How to connect your phone to your TV via Wi-Fi

Connect your phone to your TV using a wireless Wi-Fi technology is very simple. The only condition for this - integrated or external Wi-Fi module in a television receiver and the appropriate application on your smartphone. You can check this in the menu "Settings" on each of the devices. If this condition is satisfied, the connection can be done in two ways, by connecting the device:

  • each other using Wi-Fi Direct technology or Wi-Fi Miracast;
  • via the local internal network organized with a router (router).

The settings are carried out in accordance with the menu pop-up windows on the screen of each device.

REFERENCE!(Click to see)

REFERENCE!

Wi-Fi Miracast standard is a further development of the popular standard Wi-Fi Direct. In contrast to the Wi-Fi Direct, Miracast technology has a higher data transfer rate, and also provides the video with a resolution of 1920 × 1200 pixels.

Alternative standards for wireless data transmission

Based on the standard Wi-Fi wireless data transmission it has developed a number of alternative technologies, connectivity to compatible devices. Initially, not all of them are allowed to transfer data from your phone to the TV receiver, but with time overcome this disadvantage, and now these standards are supported by virtually all existing digital devices. Connection principle remains the same, with the main role in this process is now their compatibility with each other. These standards include:

  • DLNA - modern technology intended for quick transmission of information between devices, included, for example, the home IP-group. The basis for this technology is the operating environment that can be run on the basis of both wireline and wireless standards. Support DLNA standards often hide under the names of other technologies, for example, the Samsung named its standard All Share, Philips - Simple Share, and Apple - AirPlay;
  • Streambels - technology that can broadcast the media files on your TV sets compatible with AirPlay protocol. At the same time built DLNA function allows you to connect your smartphone to any TV receivers supporting this standard;
  • WiDi (Wireless Display) - a technology developed by Intel as an alternative to the standard Wi-Fi Miracast and is currently compatible with it. It provides the video with a resolution of 1080 pixels. The phone and tablet technology Wi-Fi is rare. The reason - lack of models with x86 processors;
  • AirPlay - standard created by Apple for interoperable own production units. In the first stage AirPlay provided only view files stored on the iPhone or the iPod, but then, with the advent of technology AirPlay Mirroring, it became possible to use a large screen TV for watching movies and games, derived from phone.

Currently on the market there are no digital devices that support all data transmission technology. Each manufacturer provides support for a particular interface, so a potential customer, buying home digital devices, should decide for itself whether it will display the video from your phone to a large screen television and how it implement.

Proprietary technology manufacturers

Despite the existence of convenient and widespread technologies to quickly and easily synchronize your phone and the TV producers individual, as a rule, popular brands have chosen to establish their own standards, simplifying connection between the devices of one manufacturer a. Among them are such well-known companies, such as:

  • SamsungIs used to connect the phone to a TV brand Samsung Standard All Share;
  • LG, Telephones and televisions that can be connected using Smart Share standard;
  • SonyDesigned to transfer video from your phone to the TV standard VAIO Media Server.

How can I connect my phone to the old TV

If you connect your phone to a digital television receiver it is not too difficult and can be done in various ways, the implementation of a similar operation with TVs last years release significantly more difficult. In this case, we will not consider outdated model, which was only given the opportunity to connect a tape recorder to record TV programs and will focus on a number of obsolete LCD TVs equipped with a sufficiently large number of input and output jacks for connecting a variety of external devices, for which the output has been implemented in format:

  • RGB - connect connectors type SKART;
  • component signal (Y Pb Pr) - sold on the connectors of the "tulip";
  • S-Video - realized for round 4 or 5-pin connector;
  • RCA composite signalUniting all video components in one - connected connector "tulip".

All of these external devices connected to the television receivers by means of special connectors located on its rear cover.

With these connectors are not so long ago it was possible to hook up to a TV peripherals

Each of these television connectors can be used for connecting a smartphone, using the appropriate adapter cable for this. The difficulty is to find a suitable adapter on the radio type micro-USB-> RCA, micro-USB-> SKART or micro-USB-> S-Video.

How to control your TV from your smartphone

The smartphone is becoming the universal media center, replacing the user to virtually all devices that were last used in everyday life. Currently, it can be used as a music player, a video camera, voice recorder, as well as radio and television receivers. Naturally, I got used to this versatility, the smartphone owner appears unconscious desire to manage with the help of a TV set in the apartment. After all, unlike the television remote control, which has been losing the smartphone is always "at hand".

Importantly, do not forget to turn on the TV

It should be noted that the functionality of a smartphone is quite capable of performing remote control functions of a modern TV receiver. To do this, simply download the appropriate application in the smart phone and activate it. The developers offer as a universal program, allowing to manage the simplest functions of different TV sets, and "Proprietary" software that turns a smartphone into a full remote control of a particular model of many renowned manufacturers (Sony, LG, Philips et al.).

If not at hand a TV remote control, you can use your smartphone

In the Google Play online store you can find the program and download it for free.

Among the universal programs that can turn a simple smartphone into a remote control, the greatest interest is the TV Remote app.

With this application you can control any TV

This application is characterized by high flexibility. In this case, the smart phone in which it is activated, allows the connection of one of three ways:

  • Wi-Fi;
  • IR-blaster;
  • Infrared.

The display of the smartphone need to choose the model of the television receiver, enter its IP-address, and specify the connection method.

With the TV Remote application, you can turn on / off the TV, switch the TV channels, as well as adjust the volume or mute the sound while watching TV.

After considering numerous options to connect the smartphone to the TV receiver of any manufacturer, we see that it's just enough. Using one of the existing standards, can be viewed on the big screen photos, movies and so on. It is only necessary that the mobile phone and the TV receiver supporting relevant standards.