Overview of 18 types of best shears for metal: pros and cons

Cutting sheet metal blanks - no easy task. Shears for metal will make the cutout even unusual configurations.

But this is on condition that they choose the right. In order not to drown in the range of such a tool, take a look at the best model.

Top Hand metal shears

Scissors Erdi Bessey D17ASSL They represent a linkage design. Such an instrument referred to as universal.

Purpose - continuous cut on flat and curved trajectory and shape cutting of sheet metal carbide. Presentation tool has a left orientation.

Pros:

• The basis of the working mechanism - double linkage. Such constructs designed to reduce power hand pressure on the tool, increases the cutting ability.
• Working blade made of HSS high speed steel with micro-serrated. This allows processing high-strength metals.
• The handle is made of the forging die and withstand heavy loads.
• Interlocking pawl prevent inadvertent opening mechanism.
• Silicone grip force pressing soften, minimizing pressure on the working arm.

Minuses:

• Weight scissors - 0.55 kg. For such a modification of the tool weight may complicate work.
• Relatively high cost. But for this level of quality it is acceptable.

Most electric metal shears

Makita JN 1601 - carved electrical device. Purpose - straight cut and shaped sheets and the corrugated steel material 2.5 mm thick.

The working head is rotated 360 degrees and is set in four positions. There are grooves which are intended to determine the permissible processing thickness. Tool weight - 1.6 kg.

Pros:

• versatility and maneuverability of the operations;
• simple replacement of die and punch;
• depth limiter cuts;
• ease of use provides a narrower design of the case;
• The start button is fixed, which makes prolonged cutting process less tedious;
• a small turning radius;
• long electric wire increases the level of comfort in the work;
• infeed with both edges of the workpiece, and with the middle;
• no deformation on the cut.

Minuses:

Minuses:

• and abundance of small sharps lunate 4 mm wide;
• Res locations deviated in thickness of the product drops;
• noise in working condition;
• the need for lubrication of the punch and die before starting work.

Top metal shears for drill or screwdriver

NP 1.8L Sparky 181,875 - head-scissors, which can be used in conjunction with electric drill or screwdriver. Purpose - cutting along a linear path or radiused.

Performs cuts of sheet metal less than 2 mm thick, as well as of stainless steel blanks.

Pros:

• Liberal price;
• the convenience of use;
• devices maneuverability gives the ability to make cuts in tight spaces;
• suitable for any model of an electric drill and screwdriver;
• clean cut without burr;
• compact size and weight - 0.5 kg;
• full complete set: Additional matrix and punch, combined key, nozzle, handle;
• performed by cutting small radius - 30 mm.

Minuses:

• Low permeability at the cut longitudinal undulation in the ground;
• under strong pressure may break the handle;
• It does not allow to process the sheet metal blank and a thickness of 2 mm;
• basic tool used electric power should be more than 450 watts.

Most cordless metal shears

makita BJS100RFE are splined professional level construction. Designed for use in locations remote from the electrical supply.

Such tools are performed curved and straight cuts at various levels of complexity.

Pros:

• tool runs on a lithium-ion battery, which has a memory effect, lack of ability to discharge inoperative and powerful performance;
• such a device is equipped with two batteries capacity of 3 Ah, which increases the duration of the working process;
• smooth cut edges without defects;
• protection against accidental starting with the light sensor;
• internal fan cools the engine while protecting it from overheating;
• automatic shutdown of the battery when the critical level of energy intensity protects it from complete discharge;
• an additional indicator signals the battery is fully charged;
• minimum radius cutting - 3 cm;
• streamlined body with rubber pads.

Minuses:

• high price;
• It is not suitable for use when processing the gypsum boards;
• cuts only metal to 11 mm thick.

Top reinforcing metal scissors

Rothenberger Robolt 75013 - scissors intended for use in manual cutting of reinforcing rods for reinforcing and structural steel reinforcement types I, II, III, IV and steel wire. Instrument belongs to a class of professional.

Pros:

• scissors sponge made of vanadium-manganese steel with additional induction hardening, which gives the class hardness HRC 55/60;
• cutting the bar-shaped reinforcing steel diameter of 10 mm;
• durability;
• Rubber covers arms do not permit sliding of the tool;
• efficiency;
• durability.

Minuses:

• Weight 2.63 kg - significantly, in continuous operation reduces the efficiency of such severity cuts.
• High price.

Top carved metal scissors

CN16SA from Hitachi used for cutting sheets of steel and stainless steel, aluminum, copper on both the forward and the left- and right-hand trajectory. These functions are provided by changing the three positions.

Treated sheets of varying thickness with the width of 5mm incision:

• aluminum - 2.3 mm;
• flat steel - 1.6 mm;
• stainless steel - 1.2 mm;
• multyprofiles sheet - 1.6 mm.

Pros:

• minimum radius processing - 40 mm;
• Built ventilation system produces cooling of the engine;
• versatility cut in both the transverse and longitudinal direction;
• cutting speed - 2300 strokes / min;
• possibility of processing the sheet with trapezoidal profile;
• double insulation;
• long electric wire;
• slide switch;
• sleek narrow hull with rubber pads.

Minuses:

• Available hard to find supplies - die and punch. These components only under the order.
• No protection against accidental activation of the instrument.
• In operation, the shaving razor is formed.

Top punching, metal scissors

Interskol HB-1.2 / 520 designed to work with the sheet and profile material. Punching cutter processed curly and straight sections. The width of the cut produced - 1.2 mm at the maximum thickness of material:

• steel sheet - 1.2 mm;
• aluminum sheet - 2mm;
• Non-metallic materials - 2.5 mm.

Pros:

• Getting started is possible at the beginning of the blank, and in the middle. To breach the last operation necessarily a hole is drilled in the right place.
• The vents to cool internal components mechanisms.
• Narrowed grooved handle.
• The cord length of 3 meters.
• The leader in the mainstream segment of such tools.
• Cutting smooth, profiled, corrugated and welded from several plate elements.
• When the thickness of blank 1 mm working speed of 2 meters per minute.

Minuses:

• Components and Consumables order only;
• the complexity of the production of replacement brushes and other consumables;
• noise at work.

Top guillotine shears for metal

Anchor Corvette-551 - guillotine mechanism designed for cutting sheets. Upper cutting element is shaped sword. Such constructive directs all the pressure on the minimum area of ​​the billet.

Pros:

• uncomplicated design;
• wear resistance of the working blade;
• ergonomic dimensions: 138 * 30 * 8 cm;
• the handle is covered with plastic to prevent slippage;
• fastening to the smooth base provides stability;
• frame, made of steel channel that ensures durability of the whole structure;
• It does not require special maintenance and operation skills.

Minuses:

• processes the metal not exceeding 1.5 mm thick;
• maximum sheet width - 1 meter;
• completing only under the order.

Top Scissors on metal to metal

Makita JN 3200 - a versatile tool for various processing and cutting the steel sheet material, up to 32 mm thick, including metal. Performs processing in a straight line, and curly.

Equipped with a powerful engine to 660 W, which provides speed 1300 revolutions per minute.

Pros:

• double insulation protection;
• ease and streamlined design allows one hand operation;
• the body is made of durable plastic, reducer of aluminum - this tandem provides competent heat sink, which prevents overheat mechanisms;
• continuous mode for cutting at high speeds.

Minuses:

• produces considerable noise during operation:
• for cutting of corrugated material matrix must rotate 90 degrees and make the cut with a lateral rotation;
• intensive work quickly wear consumables.

Top Scissors on metal to shape cutting

Scissors TITAN PPN55-16 embodies all the qualities required for a tool, intended for figure rezi metal. In addition to the main functions of the sheet processing apparatus performs on the forward path and the inner notches.

Pros:

• beginning work from anywhere;
• the width of the cutting line - 5 mm, which allows working with the minimum amount of metal shavings;
• access to independent replacement brushes;
• versatility cut direction;
• high speed devices - 2300 rpm;
• minimum inner radius - 40 mm;
• streamlined and ergonomic housing.

Minuses:

• the maximum allowable thickness of the material being processed - 2 mm;
• rapid wear of the working elements;
• high price range among similar electrical instruments.

Top curved metal scissors

Scissors curved ERDI D123S with lever transmission designed for safe and efficient cutting strip steel. The design allows you to make cuts with one hand.

Pros:

• a working head is made of hardened steel chiseled casting technology;
• processes steel tapes of 32 * 1 mm;
• induction hardening work item extends the life;
• Scissors are equipped with a clip, which fixes the tape, not allowing it to slip;
• double linkage increases the level of the tool's ability;
• the shape of the lower blade pass under the sealing tape;
• ergonomic handle with bends his arm.

Minuses:

• high price range;
• to perform the cutting force exerted great pressure that the constant work and complicate the process and reduce productivity.

Top left on metal scissors

German scissors Erdi Bessey D17AL with left hand orientation intended for direct processing of fine-leaved and curly metal.

Pros:

• reinforced linkage that allows the use at high loads;
• toothed notching on the working surface prevents the possibility of slipping the blank during operation;
• Stick manufactured by stamping forging ergonomic technology;
• the presence of the lock to prevent accidental opening.

Minuses:

• possibility of processing metal to 1.5 mm thick;
• small length of the cutting surface - 2.4 mm;
• mechanism tight compression tool.

The best board on metal scissors

Table shears for cutting metal Stalex PBS-7 They represent a universal machine. Its design is suitable for use on small and large industries, as well as ancillary workshops and construction sites.

Pros:

• the absence of an electric motor allows you to have board scissors at any convenient location;
• toothed gear and handle the optimal length to minimize expenditure of energy when pressed;
• design flexibility allows cutting any material: T-bar joists, steel shapes, sheet, profile, angle, a steel strip;
• adjustable clamp height;
• precision cutting ability;
• obrezinennyj lever eliminates the possibility of sliding;
• there is a possibility of fastening to a surface;
• easy to use and does not require the skills of staff working for the machines;
• the maximum thickness of the material being cut 8 mm, rod 22 mm in diameter, the size of the corner used should not exceed 60 * 7 mm;
• 5.56 kg weight enables widespread installation;
• body covered with paint and varnish, which prevents corrosion.

Minuses:

• lack of electrical components and reduces productivity;
• high price level.

Top right, metal scissors

Metal shears 425mm curved JTC JTC2561 It belongs to the class of professional. The construction is designed for cutting metal when the body work. directional type blade - right.

Pros:

• Wear resistant blade;
• curved cutting portions provide efficient production workflow;
• discloses a small angle;
• universal dimensions: 50 * 85 * 20 cm.

Minuses:

• Metal pens are not obrezinena;
• considerable weight 1275 c may reduce the efficiency of continuous operation at the tool.

Top pneumatic scissors for metal

Pnevmonozh SUMAKE ST-6614K designed exclusively for professional use in car services or construction site.

Such a tool is intended to cut any sheet materials, but mostly metal. An automatic device is connected to the compressor, which pressure is not below 90 psi.

Pros:

• by operating the pressure in the compressed mode, a similar tool has a large work resource than the analogs on the motor;
• the body is made of metal, which securely saves internal components from damage;
• a trigger element, easy to use with any capture tool;
• Work on compressed air provides a low level of explosion or fire equipment;
• design operating mechanism is designed to operate under high loads;
• long-term operation tool does not lead to overheating or breakdown, as well as an overrun of energy resources;
• light weight 1, 3 kg minimizes the power consumption of the working process;
• It comes with three interchangeable blades.

Minuses:

• Compressor operation requires skilled operators of pneumatic equipment;
• high price levels among similar equipment.

Top Roller metal scissors

roller scissors Pro Cut Off Tapco 10379 - a vivid example of a qualitative model equipment designed for cutting of roll metal.

Pros:

• solid cast body from steel;
• reliable construction;
• leaves a smooth edge without shear waves, nicks and burrs;
• cutting working surfaces are made of hardened tempered steel;
• is adjustable notch;
• Simultaneous cutting of two sheets;
• storage and transportation facility incorporates a rugged carrying case;
• compact size - 37 * 27 * 19.5 cm allow the use of roller blade anywhere;
• durable knives.

Minuses:

• Coordinated work on trubogibnom machine manufacturer of such equipment. Compatibility with the rest of the machines in question.
• The high cost of such equipment in the sector.
• The possibility of cutting a sheet metal up to 7 mm thick.

Top scissors on metal with offset mounting

Australian scissors with offset mounting Stubai is a specialized tool, being used for roofing.

Working the lower edge is located on the right side.

Pros:

• rounded blades are made of high alloy steel by induction hardening technology working blades;
• additional equipment allowed the springs to simplify the process;
• leave a smooth edge, so it is often used as rovnitelnogo device which removes burrs;
• painted handle that prevents corrosion.

Minuses:

• Additional springs without complicated work process;
• there are limitations on the metal cutting - the maximum thickness of 1 to 5 mm;
• a leader in the mainstream of such instruments sector.

Best Universal tin snips

Universal cutting tool stanley 2-14-566 It is intended for processing in a straight line. Cut any material: steel, cardboard, wire and rods, plastic, leather, rubber, non-ferrous metals, and more.

Pros:

• cast housing made of chrome-molybdenum steel, which increases the lifetime;
• ergonomic two-component covers the stops for the hands are put on the working handle, which increase ease of grip;
• hook-and-latch provides added security;
• fastening elements are made of chromium;
• equipped with a double helical spring to increase productivity;
• notching at the cutting surface eliminates slippage of the workpiece;
• loop on the handle allows you to store a pair of scissors in a suspended form.

Minuses:

• possible to cut metal 1-1.2 mm thick;
• rapid wear-expanding mechanism, but it is easily changed by yourself.