Sink Bathroom bill on the table: types, selection, price

Sink Bathroom bill on countertop I gained a lot of popularity in recent times. It has a simple installation, in addition, it has an attractive appearance. On the surface of the stone remains enough space for amenities. However, before the product selection should carefully review all the advantages and disadvantages 74rv5j9rkonstruktsii and range. design tips will help you choose the best model and install it by hand.

Pros and cons of overhead shells on the countertop in the bathroom

From the name becomes obvious major difference from conventional structure bill shells. Due to the flat bottom of it is easily installed on any countertop, it is released in this space on the panel. The main advantages of the model include:

Negative aspects to allocate difficult. The product has virtually no defects. It is important to choose only a solid table top with a moisture resistant coating.

Tip! In order to save space in the bathroom it is recommended to choose a corner sink.

Standard sizes of shells overhead

When choosing a sink is important to consider the area of ​​the bathroom and filling furnishings. The main advantage of invoice models - thanks to its symmetrical design is not tied to the installation flush with the wall or corner. It is mounted on any surface. If you allow the size of the room, the installation of the product can be made in the middle of the main countertop.

shell size can be divided into three categories:

bowls bowls on the table parameters from different manufacturers may vary in the range of three centimeters.

What materials produce overhead sink on the countertop

After selecting the dimensions necessary to determine the shell material in the manufacture of a bathroom with the tabletop. A variety of textures, a wide price range require a thorough approach. For example, a model of the tree - this option is rarely found in homes. Before buying the shell is first necessary to check the quality of production.

Consider the characteristics of each material.

ceramic models

Ceramics - the most popular material for the manufacture plumbing. It is easy to clean, and resistant to cracking, is performed in different colors, however, the fundamental tone is considered white. The main advantage - the cost budget. Manufacturers are constantly improving the design of models, so pick up an interesting option is easy.

Shells of porcelain

Unlike porcelain pottery in the ratio of components. The more clay there and below the firing temperature, so it has low strength and high water absorption, for reduction of the cup which is coated with several layers of glaze.

Porcelain

This kind of fine ceramics. Due to calcination at high temperatures, the product is water. Processed surface to the ideal smooth, so for coating easily maintained. In porcelain sinks have only one drawback - fragility. That is why during installation and operation of the product is necessary to be extremely careful.

Acrylic bathroom sinks with worktop

Their main advantage - the ease and low cost price. Products made of acrylic suitable for thin worktops. Despite the weight of the model have high strength. Because of these qualities, they are very popular. During operation, you need to be very careful and avoid mechanical shock hard objects.

Articles made of natural or artificial stone

If there are no restrictions in the media, you can select a built-in sink into the countertop in the bathroom of the stone. This can be marble, granite or stone. Such models look luxurious and expensive. They have high strength and durability. Products made of natural stone are heavy, it is necessary to provide when choosing countertops. Despite the strength, on a stone surface can form cracks or chipped, so should be extremely accurate in operation.

Alternatively, you can consider the sink made of artificial materials. Their price is much lower, so the products available to a wider segment of customers.

glass bowls

It's pretty original products, in the interior, they look very unusual and elegant. The advantages include high strength and chemical resistance. Manufacturers produce models in a wide variety, both in shape and size.

They have a significant disadvantage - can be seen on the surface of water drops. For the first time after installation may be a desire to wipe the bowl after each switch on the water, but with time it will become more difficult to perform. As an option - the shell of frosted glass.

Metal overhead shell

The metal shell is made of brass, copper or stainless steel. Some models are covered with enamel. The main advantage of such products - low cost, durability and longevity. However, I must say that the metal shell need special care. For them, it is necessary to choose special formulations for cleaning.

Sink Bath bill on the table: the shape and features a selection

In the trading network can choose sink, both traditional forms and asymmetrical design that will decorate the interior, make it unusual. The edges may be crimped in the form of water droplets, flower. An interesting option - to form a triangle. At first glance - it is about to tip over, but it is not.

It should know! When selecting forms invoice model must take into account the area of ​​the bathroom. not approach the massive product for a small room.

The bowl can be selected as an addition Sink with pedestal with monochrome kaleidoscope and illumination, which, when the product will please mysterious play of light and water.

Washbasins Oval

This form can be called the most comfortable. For the most comfortable location on the table should provide a space from the wall. It is advisable to choose an oval model for the bathroom large area in small rooms use them uncomfortable.

Round sink on the countertop

This is a classic version of the product. In stores you can choose a model of different depths for large and small bathrooms. Approach it can be on either side, it is the main advantage of round shells. They are available with hole craneWhich is necessary to cut into the countertop.

Sink square or rectangular

Shape of the product in the form of a rectangle or a square suitable for any design and bathroom size. choose a model for smaller areas, which edges are rounded. You can also look at the sink, which is mounted on washing machine. The range in the trade network will easily pick up the product of all sizes, even for the tiny bathrooms.

How to choose the invoice sink on the countertop

To operate the built-in washbasin in countertop does not blight the lives of the owners, and brings only positive emotions, you need to choose the right product according to size and shape. To do this, you can advise the following:

• model selected on the basis of the overall presentation of the bathroom;
• porcelain and glass bowls should be carefully inspected when buying for cracks and chips;
• in a house where there are small children, you should choose a product with rounded edges;
• when choosing a mixer must take into account the parameters of the cup. For deep low cranes models are not suitable;
• before heading to the store, you need to accurately size vymeryat countertops and bathroom.

It should know! To determine the optimum depth of the sink to bend over it, and the elbows should be placed in different directions. If they do not run into the sidewall products, then Sink chosen correctly.

Features countertop under the sink in the bathroom

Models are mounted on any flat, level surface. This panel can be made of wood, MDF, Plastic or stone. It is important when choosing cabinets in the bathroom under the sink, consider the following invoice to material requirements:

• the panel should be waterproof;
• It must match the overall design of the bathroom;
• should not take up much space, the choice should be considered free of the bathroom;
• It should be beautiful and comfortable;
• optimum height of countertops in the bathroom sink for the bill, 75 to 85 cm;
• comply with hygiene requirements, caring for it should be simple;
• resistant to household chemicals, and temperature extremes.

Panels of wood and MDF necessary after contact with water wiped dry. For wood countertops is important to choose a well-crafted material protective structures. Such a product with proper care will last a long time.

When choosing a stone countertop is important that the shell materials and panels combined. It can simply be oblitsevat or mosaic tiles. Such products are easy to care for, they do not smudge on the water. For the interior in the style of hi-tech, you can stop on a glass base. It is made of thick glass and is not afraid mechanical damage. However, it requires intensive care, because on the surface there are all droplets of water and divorces.

Related article:

Countertops for bathroom under the sink. The main types and features, the average cost of a review of popular models, recommendations for selection, step by step installation instructions with their hands - in our material.

A special kind of "lily" under the sink washing machine

To save space in small bathrooms manufacturers have released a special model - the sink "water lily" with worktop over washing machine. Its difference - the location of the drain. It shifted to the edge of the product. Due to the siphon and the wiring to the sewer network can be installed as close as possible to the wall and put a bowl washing machine.

The dimensions of this model correspond to the parameters stiralki: 60 * 50/60 cm. Height product - up to 20 cm. The bowl is not suitable for large cars, the depth of which is greater than 51 cm. When the product selection is important to consider the following:

• size 60 × 60 cm model stiralku can be set to a depth of not more than 51 cm;
• sink with parameters 60 × 50 cm Machine suitable for the depth from 32 cm to 36 cm.

The sale comes washing machines already equipped with shells. The cost is quite high, but this option may be considered not only from the point of view of the beautiful and smart design, but also the ease of installation.

Review of popular models and manufacturers of overhead shells

To better determine the choice, we offer an overview of the most popular models from different manufacturers.

Model / Country	Size W × B × T, cm	Form / material	Description
	50*44*12,5	Rectangular shape / Porcelain	Not provided tap hole, no overflow protection. suitable for modern interior.
	40,5×40,5×4,5	Round shape / ceramics	There are holes for the faucet and overflow protection. Bathroom in a classic design.
	49×49×13	Round shape / ceramics	Not provided tap hole, no overflow protection. Suitable for marine style.
	58,5×38×11	Oval shape / Porcelain	Not provided tap hole, no overflow protection. Suitable for solid worktops.
	60×45×13,6	Custom oval / faience	There are holes for the faucet and overflow protection.
	42×42×17	The rounded shape / Porcelain	There is a hole for the overflow. Suitable for small bathrooms.

Fitting shear sink on the countertop - the main stages and nuances

Installing the bill does not cause difficulties model. Its main difference from the built-in - no need to mount wall surface. Consider the step-sink assembly:

1. Shut off the water supply and screw clockwise to the outputs from the hot and cold water stopcocks. Angle valves you have to turn up the hole. For tightness can be used fum-tape or flax.
2. On the set taps for water pipes and fittings Tighten manually. Use an additional sealant is not necessary, as they are installed sealing gum.
3. Check for leaks by means of test run water. Such a procedure is required before installing the faucet, the water will wash the dirt from the hoses.
4. Fit the cabinet with countertop. If desired, the top and bottom panels to be cut two holes sewer pipe. It is possible to perform using a drill with a round head. If the cabinet several horizontal shelves, holes need to perform each.
5. If the cabinet is equipped with leveling feet, should be aligned on the level of the tabletop.
6. establish siphon corrugated pipe into the sink drain. A siphon connected to the housing upper end of the tube, thus it is possible to adjust its length. To bill the sink should fasten grating siphon. Then, put a rubber ring, which is necessary for sealing compounds. Followed by manually tighten the coupling nut.
7. Setting the mixer is performed by attaching a hose with a locking element.

Tip! If the installation of surface-product will be on a horizontal shelf, the perfect solution would be the acquisition of a siphon made of stainless steel. Its cost is slightly higher than usual, but it looks in the interior is the product much more attractive.

Step by step installation of a product can be viewed on the video:

Review of prices and where you can buy overhead sink on the countertop

In a trading network or online stores you can pick up the sink in the bathroom on the counter, as in the budget price and premium. All depends on the producer and manufacturing material. The cost of the porcelain shells economy size (W × T × V) 43 × 22 × 9 cm Russian manufacture starts from 700 rubles.

The most expensive items are offered from India, they are made of natural stone: basalt or granite. Price range: from 26,000 to several hundred thousand.

Models of European manufacturers can pick up in the medium price range from 5000 to 45 000 rubles. Products that are imported from Eastern countries, will cost the average cost about 3000 rubles.

conclusion

Overhead sinks sinks bathroom are gaining in popularity. Easy installation, high performance, a wide range of shapes and sizes make them quite popular. Bath is not only a place for the adoption of water treatments, but also a full bathroom for relaxation. Therefore, I want to make it as comfortable and harmonious.

We hope that our article will help you choose the best model. What our readers think about this? We look forward to your feedback in the comments. And finally, we offer watch a video with recommendations on how to choose the right sink invoice: