For the full viewing movies at home need speakers for the TV. This is due to the fact that manufacturers are producing more and more thin panels, which simply does not fit high-quality audio component. Therefore, to immerse themselves in the atmosphere of the story you are viewing will help the speaker system for your TV.
To know how to choose the audio you must understand the types of columns along with their operating parameters.
- active;
- passive.
Which one is better is hard to say. It all depends on the user's personal requirements.
active
Equipped with built-in amplifier and require a minimum of effort to connect to the TV. Complete the majority of models are USB-cable, you can connect speakers to both the TV and to your computer.
Due to the built-in amp powered speakers reproduce high-quality sound at all frequencies. However, they do not need to connect to your home theater, as they do not cope with high loads.
passive
These columns must also buy a subwoofer. Plus passive radiators - clear sound and resistance to stress. Of the minuses - the complexity of the connection. In order to properly connect all the need to spend some time.
connection
Many people wonder how to connect the speakers to the TV. This is important because, depending on the speaker system supports connection interfaces can be wired or wireless.
The main methods of wire to connect the wires to the corresponding inputs. On TV connectors labeled OUT (output) are used for this, and an acoustic system IN (input). Only in this way will bring the sound from the TV to the speakers.
HDMI
The most modern method of connection transmits digital audio format. All that is needed - to connect speakers and a receiver box HDMI-cable.
TRS-jack
An outdated method of connection, which is not supported by modern TV models. Here, the sound quality depends on the cable used. Wire with two contacts transmits mono sound, but three - stereo.
Line input
With such a connector is always located to the headset jack. It applies in the case when the TV is no other interfaces. This method requires an adapter for tulip.
RCA
It refers to the analog inputs. Cable tulip need to connect to your TV according to the color scheme. Via RCA-connector to a television, you can also connect your computer speakers.
SCART
Multi-connector transmits the audio and video signal. For such compounds may need adapter Scart mini jack or Scart RCA depending on the supported connector acoustics.
Wireless
Connecting without wires is realized using Bluetooth technology. Important to both of its support device. The main objective of such a compound - installation pairing mode. For this:
- Turn on the TV.
- In the TV menu Sound Settings, locate Bluetooth.
- Including portable loudspeakers.
- Wait for the TV in the list of available Bluetooth-enabled devices will be speakers.
- Then select them as device pairing.
If your TV does not support such a connection, you will have to buy an adapter for a wireless connection. The algorithm of its connection:
- Plug the adapter. Depending on the model, it can be operated from the mains or by batteries.
- Connect it to the TV jack. Typically, the adapters are fitted with RCA or mini jack plug.
Communication with speakers then set automatically.
selection Options
To buy a good speaker should be carefully approached her choice. First pick installation option. Wall speakers will not take up space, but require a secure attachment. Floor models are suitable for spacious rooms.
Additionally, consider the design, material, sensitivity, power and speaker type connection.
Design
Today, manufacturers produce models in a variety of forms. The diversity of the speakers can be grouped into three categories:
- spherical;
- pyramidal;
- rectangular.
Design affects playback capabilities. Of all the options, rectangular provide the most pure and high-quality sound.
Material
The housing is usually made of plastic or wood. Plastic radiators are significantly lower, but here the sound quality suffers. Wooden column more expensive, but provide high quality playback.
Sensitivity
It characterizes the maximum volume. The higher the score, the louder the speakers will play. Models with high sensitivity values do not need an amplifier.
This parameter is measured in decibels and is always specified in the instructions for the equipment. The value in the 94-102 dB indicates a high sensitivity, and 84-88 dB - about low.
Power
Is nominal, and the maximum peak. Select the equipment you need based on the nominal values of power and size of the room. As for a small room speakers are powerful 50 watts and for a large room is required not less than 80 watts.
type of connection
Choose the type of connection should be based on the connectors of the receiver box. But almost always in the absence of identical connectors, you can use an adapter.
Ranking of the best models
To facilitate the selection of a suitable model has been generated list of the best low-cost speakers, taking into account customer feedback.
Attitude Andersson
Active Speaker System with two wireless transmitters to connect via Bluetooth. Total power - 30 watts. The body is made of plastic. The average price is 7.5 thousand. rubles.
Pros:
- wide frequency range from 60 to 20,000 Hz;
- a wireless connection;
- pure and natural sound;
- wall mount.
Minuses:
- weak bass;
- on all speakers are no buttons, so you can operate only with the remote.
Samsung SWA-9000S
Another active speakers with plastic housing. An excellent choice for Samsung televisions. Assumes wall installation type. The manufacturer has provided compatibility with several models of the soundbar. It is an average of 9.6 thousand. rubles.
Benefits:
- wireless;
- ease of connection;
- quality assembly;
- good sound both high and low frequencies.
Disadvantages:
- speaker mesh strongly attract dust;
- mounted on the wall at right angles.
LG SJ3
This soundbar as a thin plastic panel sound and MDF. It connects to the TV via Bluetooth. There is an automatic adjustment of settings such as voice volume gain in the films, optimization of bass. Sold at an average price of 16 thousand. rubles.
Advantages:
- high sound quality;
- stable connection via Bluetooth to a smartphone or tablet;
- easy connection.
Disadvantages:
- is not supplied cable to connect to your TV;
- little different interfaces.
Yamaha NS-333
Passive acoustic system with a housing made of MDF and removable grille. The assembly has a mount for wall mounting. Implemented magnetic protection. The average price is 18.5 thousand. rubles.
Pros:
- good sound;
- wide frequency range;
- maximum power 150 W;
- It can be hung on the wall.
Minuses:
- glossy bottom without footboards which can be scratched when mounted on the stand;
- on the surface is very visible dust.
Sony HT-CT390 / M
Sound bar with an optical input and support from other interfaces - HDMI, Bluetooth, NFC. Suitable for installation in a large room. Due to its compact size fits easily on any pedestal, but it can also be mounted on the wall. Worth 23.6 thousand on average. rubles.
Benefits:
- well-balanced sound;
- stable wireless connection;
- DTS presence decoders and Dolby Digital;
- built-in power supply;
- Easy setup.
Disadvantages:
- audio delay;
- You can not make their own equalizer settings.
Before buying the TV speakers to decide what type of installation is preferable. Also consider the size of the room and the relevant operating parameters. In addition, read user reviews, which have already appreciated the work of acoustics.
Only in this way will choose the functional model, which will allow to immerse themselves in the watching and will last more than one year.