Most modern models of washing machines are equipped with automatic self-diagnostic system. In case of failure the system stops operation of the device and informs the user of an error code. Consider the error codes washing machines Indesit.
Depending on stiralki model errors are different. Modern instruments have a display, which displays the stages of washing. In the event of a breakdown at a certain code will be displayed. The user can only rasshivrovat it.
On older models without display errors are displayed by a combination of lights. For example, using the error indicators are given in the models wisl series. In such a case must first decode the combination, and then determine the code value.
Errors on the display
Errors Indesit washing machine with a display made up of the letters F and serial number.
F01: a short circuit in the electrical circuit of the electric motor
Washing machine Indesit outputs F01 when a short circuit occurs in the motor. It arises as a result of moisture in the wiring connector. The corrective action necessary to exclude the presence of moisture and salt deposits on the connector terminals.
With no experience in the repair of household appliances entrust the repair to professionals.
F02: disrupted motor or tacho
Self-diagnostic system can issue F02, if the signal from the tacho is not supplied to the control unit. This situation occurs because:
- Stuck motor armature. Replace jammed bearing and if necessary the motor.
- Broken wiring. Restore the damaged wires and clean the connection socket.
- Faulty tachometer. Install the new sensor.
F03: faulty temperature sensor
In the absence of a temperature sensor signal control unit makes the voltage to the heating element. To resolve this issue, check the sensor connection sockets. The terminals should be connected tightly and have no oxidation. If the connectors are properly connected, replace the sensor.
F04: water level sensor delivers the mixed signals
Washing machine provides a code of reasons:
- Clogged filter filler. Clean or replace the filter element.
- damage in the wiring leading to the control module. Restore the broken wires.
- Breakage of the water level sensor. Replace with a new sensor.
F05: sink not working
Indesit washing machine can generate an error F05 in these situations:
- incorrect connection machine to the sewer system;
- clogged drain system;
- He broke down the drain pump;
- pressure switch is broken.
On error F5 Check drain system for blockage and repair it. Details defective, replace with new ones.
F06: contains the incorrect program
This code occurs due to incorrect operation of the control buttons. To resolve the error test the control panel and replace defective parts.
There are times when issues stiralka F04 due to a software failure. In this case, simply restart the device.
F07: incorrect operation of water heating element
Display F07 means that the heater does not heat the water in the tank. Such a situation arises for three reasons:
- Faulty heater. Check the water heating element of a multimeter.
- Violation of the communication between the TEN-ohm and the control unit. Replace faulty connectors and wires.
- Incorrect temperature sensor work. Replace the part with a new.
F08: TEN-breaking relay A or of water heating element
F08 error in the washing machine Indesit indicates that stopped working heater. The reason may be incorrect operation of the relay of inclusion of the heating element or heater failure-a. In both cases, the need to replace the part.
F09: memory failure control unit
F09 is the result of a software glitch. To correct this error, contact the service center. Experts will carry out the module re-flash.
F10: no signal from the pressure switch
The error appears in the following cases:
- A gust of one or more wires extending from the water level sensor to the control unit. Restore damaged wires.
- Failure of the pressure switch. Replace the sensor.
- Contamination of the sensor of the air tube. Clean the system.
system cleaning can be performed independently. To do this, remove the tube and wash under running water.
F11: drain pump is not working
Stiralka Indesit gives F11, if the control module may not include a drain pump. As a result, after the wash water from the tank is not emptied. Solve the problem in three ways:
- Check the drain pump and replace if necessary.
- Porverte, if pump impeller is jammed due to foreign objects and clean it.
- Clean the drain filter.
F12: breach of communication between the control unit and the display board
F12 Error on the washing machine Indesit occurs if the electrical circuit from the control unit to the display board there was a rush. To solve the problem to ring wiring multimeter and replace the damaged cables.
F13: temperature sensor failure drying
The appearance on the display F13 code indicates the drying circuit in the temperature sensor circuit. You need to replace the item on a new one.
F14: TEN-disrupted and drying
In the event of F14 fault in the first place, check the contacts and connections TEN-drying and leading to his harness. Terminals should be a tight connection. Checks whether the heating element, measure the resistance at its outputs.
Before disassembling the washing machine disconnect it from the power supply to avoid electric shock.
F15: incorrect operation of PETN drying relay
Such a code is issued only Indesit washing machines with drying function. Error is issued, if the failure of a relay control unit can not turn off the heating element. To solve the problem and change the relay TEN-drying and labor detail. Also, the machine can give F15 when malfunction of the heating element. In this case, replace it.
F16: the washing machine drum is blocked
F16 error occurs in the washing machine with vertical loading type. There are three reasons for failure:
- The entry of foreign affairs. Release the drum from foreign objects.
- Opening loading hatch during the washing process. Open the hatch prevents the normal operation of the drum. Close the loading door.
- A software glitch. Restart the device.
F17: door lock does not work
On devices with front-loading, this error is not completely closed the door. When appears on the display F17 code, open the door and check whether the underwear does not interfere with the closure. Also, F17 error causes may be misconfigured or broken door hinge lock. Replace non-working parts.
F18: the electronic module failure
Run a repair their own hands is not possible without experience. To fix the electronic module, refer to a specialist.
In the washing machine Indesit may appear H20 error. This means that stiralka gained over a period of time the water level does not correspond to the norm.
Codes flashing lights
In models without display errors signaled by the flashing indicators. Each provides its own fault indication. Below is a table to decode the error codes.
Other causes of failure
Flashing LEDs on the control panel of the washing machine Indesit often occur due to improper use. Such violations include excess weight clothes, loose closing of the door, the wrong choice of program and so on. D.
Indesit washing machine with self-diagnostic system informs the user about the failure. By this arrangement, easier repair and prevent serious trouble.
