Appliances household helps, but it is that the washing machine is not included. The device in such cases does not respond when you press buttons, LEDs can light up in a chaotic mode and the program by pressing the buttons is not exposed. If you do not turn on the washing machine, you must identify the causes of failure and fix them.
Indicative lamp may light, but the unit does not reach the water and washing starts.
The indicators may go out and included. Lights on the main panel are flashing and operate erratically.
Lamp may not light.
Causes of faults
- If you do not run washing machine could fail its details:
- violation of the outlet works;
- damage to the power cord;
- failure start button;
- disturbances in the operation of the main interference filter;
- failure of the standard locking hatch system;
- failure of the main control module.
In some cases, you can fix the problem yourself, if you have experience in the repair of household appliances. If a significant fault, entrust the work to professionals, to further prevent damage to equipment.
There is no electricity, the indicators do not light up
Stiralka can not be included when there are problems with power indicator. Check the main battery machine-gun. In this case, find out if the whole apartment is de-energized. Check the outlet by plugging another device into the outlet.
Power button
Check the functionality of the power button with a multimeter. To begin, unplug appliances. Check reaction multimeter on and off the unit, be sure the instrument response. In the case of inclusion art multimeter emits a characteristic signal. Faulty home button replaced.
interference filter (FPS)
Washing machine can not be activated when a fault RFI.
Noise created by electromagnetic waves that propagate during operation of the washing machine. noise filter removes this phenomenon. In case of violation of the filter, it automatically overrides the current supply and the washing machine stops working.
Diagnosed apparatus also using a multimeter which prozvanivat input and output. In the first case it is used for programming the wires 3 and the second 2. If any malfunctions in the operation of the filter, replace it to ensure quality and safe operation of the machine.
control module
Washing machine is equipped with an intelligent control, which provides operation unit. The device controls all the processes of the art. If the item goes down, the washing machine is not working. In case of failure it is necessary to establish contact and work to replace the item.
This requires professional knowledge and skills, so consult a specialist for high-quality and safe repair.
door locking system
The indicators may light up and blink, and the machine does not erase a long time is not included. The problem is caused by a malfunction of the hatch door. With prolonged use, lock the lock is loosened. Lock can be activated due to malfunction in the automatic operation of the system. We have developed an alphanumeric code for each brand of washing machines, which transcript can be found in the instructions.
The alert can be rendered on the display if the device is equipped with LEDs.
If the fault is in violation of the hatch operation - an indicator alert about it. The display will show dE error code, which is a long time does not go out. Violation of the lock associated with the failure of the electronics and the corrective action needed expert help.
Violation of the contacts in the circuit diagram
If the washing machine does not start, and the indicators are flashing erratically, the problem may be damage to the internal wiring. Disconnect from the power outlet and do not attempt to repair parts. To detect the failure and remove the top cover to ring wires multimeter.
Prevention of faults
The main causes of damage to the washing machine are due to improper use. By following these simple rules in the manual, you can prevent the standard error:
- Using a washing machine, follow the instructions from the manufacturer.
- Connect the washing machine through the protective device. The system protects the washing machine from power surges and short circuits.
- Do not use the machine without interruption. If one day you need to wash a large number, do a gap between the laundry load in at least 2:00.
- Fill the drum according to the prescribed weight load.
- Machine install in areas not exposed to the formation of the fungus. After each wash push compartment for powder and rubber gaskets hatch wipe dry cloth. Leave the hatch cover open for a few hours after washing.
- Use high-quality detergent containing special salts, which prevent the formation of scale.
- Once a year, run a maintenance wash cycle at a high temperature state of things without premises. In this use cleansers or citric acid.
Preventive measures eliminate complex failure and reduce costs for repairs.