Washing machines facilitate everyday life in private homes and apartments. The level of comfort is enhanced by this element, but stiralki owners and deliver a lot of trouble. If the washing machine during the spin cycle much jumping and loud noise, it is annoying not only us, but also from the bottom neighbors. Therefore it is necessary to understand the causes and establish the work of art.
Vibrate, shake and make noise in some point start all the washing machines. Especially at the time of extraction. If the noise is not too loud, and the machine does not move during operation, this factor should not pay attention.
Noise level depends on the construction machine nuances:
- model with a narrow body of the small area of support twitch stronger standard;
- in the narrow drum things often wound into a ball, which is why there is an imbalance;
- more thundering machines with metal tanks;
- Quieter stiralki direct drive.
Choose place machine placement properly. Manufacturers are trying to reduce the area of contact with the drum body to get rid of problems by vibration and knocks.
vibration Causes
Analysis of the problem begins with the most basic possible causes. In most cases, the vibration is easily eliminated without interfering with the stiralki device, since it is connected with external factors. Let us consider the most common cases, when the washing machine during the spin cycle rides.
Unstable position or improper installation
Make sure that the machine is standing on flat surface properly connected and not falter. If the light pushing or bearing on the edge of stiralki it begins to stagger, the reason for unevenness in the floor.
Equipment can be moved during the work on too smooth linoleum or tiles.
The imbalance in the drum
During washing things can slide into one large lump, which creates an imbalance during the spin cycle.
The transit bolts
Another reason to jump in that car with no transit bolts. They are located behind the appliance and fix the drum inside the housing.
In the area between the drum and the tub of the machine could allow small objects. Before you check this version, disconnect the unit from the mains and drain the water. Scrolling drum, shine a flashlight into the car in search of fallen items.
Correct the problem in such cases is possible without using the wizard. If you have done the initial diagnosis and found no problems, the possibility of serious damage.
Diagnostics
To identify damage, remove the top cover. Washing machine often jumps during the spin cycle in the following cases:
- Problems shock absorbers or springs cause the machine to ride along the floor and emit loud sounds. Over time, these parts wear out. Erased or broken parts are located in a prominent place.
- If you have failed bearings, move cars around the room accompanied by an unpleasant screech, which testifies to the abrasion or damage parts. Rust or destruction immediately visible on bearings.
- Fixing broken or worn counterweights. The item is made of concrete or cast iron. That concrete weighting agent usually starts to break down. If the attachment is broken, the work machine may become unstable.
The worst outcome of diagnosis can become fault detection, motor stiralki. Failure to identify the engine, call a service technician.
The majority of the causes of incorrect operation stiralki can get rid of their own, but in some cases require specialist intervention. Consider what you can do to repair stiralki own hands.
Trouble-shooting
To avoid frequent problems with vibrations and noise during washing, keep in mind a few nuances of use and installation:
- Do not skimp on the services of specialists. Improper connection of the machine can cause it to shake, and skakaniyu damage. Buying new equipment is more expensive servicing.
- Before connecting, adjust the feet, holding the machine on a level. If you have slippery tiled, having spread a rug, and if the floor is uneven, use silicone backing for legs.
- Before washing, check things on the availability of small items in the pockets and for loose buttons. Do not throw things at random into the drum. Spreads of laundry evenly.
- Refer to the instructions congestion.
- Because of hard water scale is formed inside the machine, there are leaks and rusting metal parts. Install a water filter. Clean the machine with special means of scaling once every 6 months.
- If the pair broke down the details of the machine, replace both.
Replacement of the springs and the counterweight
These parts are easy to change without assistance. It requires knowledge about the models of cars that are in the manual, a set of tools and minimal skills with them.
- Remove the top cover.
- Raise the tank to a maximum and lock in this position.
- Pull the spring towards the tank, while unhooking pliers at the point of attachment to the body.
- inset in the same place new part, put the pot in place and test the machine.
Weighting agent can be easily removed from its mounting. The principle of replacing the counterweight and its fastening are equally performed through the upper part of the housing.
Repair dampers and shock absorbers
The dampers are designed just for vibration damping. They are fixed by means of bolts, which can be easily removed. The problem may occur if the machine is too narrow and the room for easy repair is not enough. We have to remove large parts, for example, to disconnect the drum.
In the case of the dampers harder, they differ in the type of attachment. Easily disconnected vertical or at an angle, but Rod mounting remove problematic. I have to completely disassemble stiralku. Get help from a master to avoid further damage and incorrect assembly.
Broken bearings or engine
When breakage or motor bearings without the advice of a specialist is indispensable. Acting incorrectly, the item may fly apart into many pieces.
To avoid vibrations and shocks of the washing machine, in most cases it is sufficient to adjust the feet to properly configure the wash mode and align the level of the floor. Regularly clean stiralku from scale and pull out all items from pockets before washing. Excessive vibration of the washing machine during the spin cycle may be indicative of serious damage. There is a risk to flood the room.
