Why there is H1 and H2 error on the Samsung washing machine

Washing machine take care of the laundry without human intervention in the process. You can even manage to smatrfona. But as well as all the equipment, washing machine could fail. If the display stiralki appear alphanumeric characters and the appliance fails to work, do not rush to call the master. With some of the problems can be dealt with most, if properly decipher. Consider why there is an error in the H1 Samsung washing machine.

What does the error h1, h2 or he1, he2: causes of

Different models of Samsung stiralok give different values ​​for the same error. Error H1 in various modifications can be displayed as the H2 HE2, HE1.

All these codes indicate a problem with the heating element of the machine - electric heating element as well. There are two options:

• during washing water dialed too hot or overheated steam in drying laundry;
• Water is no longer warm before starting the wash cycle.

The reason may lie in the failure of the temperature sensor and heater circuit wires. Before diagnosis, disconnect the machine from the network.

source of error

If the error on the display Samsung washing machine looks like he2 or he1, start troubleshooting with the heating element. In stiralok Samsung heater is in front of, so remove the front cover and the control panel of the machine.

For the diagnosis will need a multimeter - a special electrical appliances. Expose it to measure voltage, that is, the "ohms". Normal value will be 27-30 ohms, any deviation signal a problem.

Circuit or open-TEN and

h2 and h1 errors in the washing machine Samsung often indicate heater circuit or breakage. This can be due to oxidative processes, blown-in wires from voltage spikes.

If the external inspection is not helped and all the elements look intact, check the details of the multimeter:

1. Disconnect the wiring from the heater, as well.
2. Measure the resistance of the part. Index of 1 means that the heater is burned, 0 - happened inside the closure, infinity sign indicates the electric heating element and breakage.
3. If the values ​​are correct, check the wiring. Any deviations from the mean of 28-30 ohms breakages of wires.

In case of breakdown or damage to the heater and wiring should be replaced.

Damage to the temperature sensor

It happens so that the washing machine Samsung H1 shows the error, H2 or HE2. In this case, heater and all wires are intact, indicate normal values. In this case, troubleshoot thermistor.

It is located on the heater. To test it, too, need to measure the resistance. Normal rate within 35 ohms. Strong deviation mean temperature sensor damage and the need to replace it.

Tripped overheating protection

Another reason for the error in stiralka Samsung - it's overheating protection to trip. Responsible for this function a special sensor on the heater. The machine automatically turns off if the water level is insufficient during operation PETN th or if the water temperature reached the 100 °.

In case of malfunction of the sensor or its burnout it may erroneously recognize the problem and to cut down the machine.

To correct this error

To correct a mistake in the washing machine Samsung under the code he2, he1, h1 or h2, you must have basic skills with tools and components. Also take care of the safety rules.

For electric heating element and replace:

1. Remove the nuts securing the tank.
2. Gently rocking the heater from side to side, remove it from the recess.
3. Landing part location tools clean from scale, then clean the contacts.
4. Install the new part.
5. After twisting the screws connect the wiring.

Is replacing a lot easier and setim can be managed without instructions.

The same applies to a thermistor. Since this element is on the heater, turn off the supply of its wires, remove the sensor and replace it with a new one. The main thing is not to be confused with the order of connecting the wires.

In case of repair of the heating sensor heater should be changed completely, since these two elements are in the bundle. We must act according to the instructions above. There stiralok models where these fuses are reusable and made of ceramic.

They fall off the heater in case of overheating and can be repaired:

1. To disassemble the heater housing, break off the plastic rivets at the base.
2. Dumps ceramic fuse cut hacksaw and enable set back.
3. Housing in areas damaged seal super-glue.
4. Sensor Performance check the multimeter and set the heater into place.

This repair is not enough for a long time. Better make sure to have all the details of cars they were new and undamaged.

error Prevention

The heating element is a washing machine - one of its most important parts. So that the machine did not give the error associated with it, follow-TEN and for the correct operation.

Pay attention to the quality of water in the house. If it is hard, install a softening filter. Then, on contact with water elements will settle smaller scale and quality of washing improves.

It is possible to carry out the internal cleaning of the machine by means of scaling. This is done in a clean area, because different mixtures contained in any tap water.

When there are errors in the display can not be ignored. Time spent diagnosis can save the home assistant and save money. Carry out independent repairs or not, decide for yourself. Illiterate intervention can lead to more serious damage.