Stiralki saved us from many everyday hassle, but in some cases, provide them. For example, the device can stop right during washing. The display of washing machines appear combinations 5e. Deciphering the symbols, you can find a reason to stop and remove. Consider why the error 5e in the washing machine Samsung appears after washing.
Most washing machines provided self-diagnosis function. The tool displays an error code to report the problem. Character values can be found in the manual for a complete list of all the errors.
Let us, which means that the error on the washing machine Samsung se or 5e. Do not confuse these issues with E5 symbol. Error E5 indicates the failure of the heating element.
The machine may stop after the end of the wash before rinsing. After washing device merges the dirty water and clean rinse dials. Drain fails, spinning difficult and Samsung Electronics in the washing machine to indicate the error se. The appearance of characters or e5 se mean draining the water problem.
There are several causes for this situation:
- Faulty electronic control board.
- Clogged drain filter. Water does not enter the hose.
- Blockage in the drain hose. Particles accumulated dirt and water does not pass. The hose may be squashed by him or something to prevent violence.
- Clogged drain. Water no place to pour out.
- The pump is stopped to pump water.
- The water in the device is frozen. This can happen if the machine placed in a cold room.
Most can eliminate the causes of these faults yourself. Main objectified the one that led to the stop stiralki.
How to find the source of errors
Samsung Washing machine may issue other than error codes 5e nd and SE. The value of all one.
The troubleshooting:
- Remember safety: unplug the machine.
- Inspect the filter for debris in the lower right corner on the front of the unit. Cleaning the filter is described in the instructions.
- Clean and wipe the filter and switch on. If the display is still an error e5, continue to look for the problem.
- Check the drain hose. It could get stuck foreign matter and fiber of woolen clothes. Forcibly drain the water from the drum emergency tube. It is located in the lower right corner near the filter. Remove from the tank all the linen. Remove the hose end of the sewer pipe and put it in the sink. Run a short wash cycle and watch. If water is flowing through the hose is bad, the problem in it. Before starting the machine straighten the hose.
- If the end of the hose in the sink, but the water does not go away, listen to the hum of the machine. Drain pump emits a sound that is different from the spinning drum.
- If the hose is cleaned, but the water does not go away and work quietly drain pump, the problem in it.
- If clogged drain, the water from the sink, too, will not go away.
How to deal with yourself: instruction
If the washing machine is blocked with water inside, look at the error codes, refer to the instructions and troubleshooting.
A fault in the control system.
The board does not receive the signal of the water from the merged unit. Unplug the machine and plug in after 15 minutes. After rebooting the system settings are restored.
Clogged drain filter.
In the lower right corner of the front wall has a plastic cover. Carefully open it by prying a flat screwdriver or similar tool. On the floor, lay down a cloth or put the water tank. Turn the filter screw counterclockwise one-half turn and remove. Clean it and rinse it under running water. Put everything back and close the cover.
Clean the drain hose. To qualitatively to clean the hose, remove it from the device. Rinse under a strong jet of water, bending and straightening.
clogged sewer
Unscrew the siphon completely or only cover. Clean and wash the inner parts. If the water still does not go, look for blockage in the sewer pipes. In this case, the liquid will be needed to eliminate blockages. Try cleaning the pipe steel wire with a hook at the end. It is easy to eliminate severe blockages.
Drain pump is not working
If during stiralki not hear the characteristic buzz fault may be in the pump. To inspect it, remove the back cover of the machine. Find it easy: he was joined by the drain hose.
Pump operation can interfere with a foreign object that had fallen from the pockets of clothing during washing. Take him away and the problem will be solved. Otherwise, replace the drain pump.
cold water
Record the unit in a warm place or pour-in machine automatic warm water.
Before you start to troubleshoot problems, remove the plug from the emergency drain tube near the filter. Drain the water, otherwise the door will not open cars.
When should you call the master
Not always possible to repair the device Samsung with their own hands. spretsialsta services are needed in more complex situations:
- Defective electronic control system - controller. It requires replacement of burnt chips and a new solder contacts.
- Drain pump fails to start, need to be replaced. The new pump can be purchased at a service center. But without setting skills you leave this wizard.
- The break in the wires to the controller and pump. With the restoration or changing wiring specialist cope better.
To avoid the problems described above, check and clean the drain filter every six months. Check how to merge the water and how exactly buzzing pump. On the washing machine of the company of Samsung often displayed error e5 and it actually eliminate their own hands. In more complex situations, do not skimp on the master services.
